What are you roasting today?

[jonumberone]

Originally Posted by floydpink

Just curious, are you setting to P1?

If so, that is the profile that starts and ends on full roast and 1st and second crack can almost blend into one.

I personally stick with P3 because it is a longer roast and has some "flat" or times when the burners aren't on.

I'd say that by the 3rd or 4th roast, you'll be understanding the roaster a lot better.

I used the p3 setting.
I pushed 1/4, p3,C, start.
Pressed the cool button with about 20 seconds left on the timer.

I think as I use it more, I will definitely understand it more.
Which is why asked about the cracking sounds.
I understand it will be trial and error at the start.
I appreciate your help with my learning curve!

[floydpink]

that's very close to the roast setting I use, except I always set to 1lb, D as you can always hit cool early but can't always add enough time to finish a roast if the 1/4 lb setting shuts down before the desired roast is finished. (safety setting allows 1.5 minutes to be added max once roast begins)

Just to add to the excitement, once you get dialed in on a roast, you'll try another blend that behaves differently.

Enjoy!