Cigar Asylum Cigar Forum  

Go Back   Cigar Asylum Cigar Forum > Non Cigar Specialty Forums > Pipe Forum > Pipe Discussion

Reply
 
Thread Tools Display Modes
Old 02-20-2014, 10:02 PM   #1
alfredo_buscatti
Adjusting to the Life
 
alfredo_buscatti's Avatar
 
Join Date: Jan 2011
First Name: Mike
Location: Piedmont, NC
Posts: 277
Trading: (9)
alfredo_buscatti is on a distinguished road
Default Barling Pre-trans Stem Replacement

I bought this pipe knowing I might have to get a stem replacement; as it turns out the tenon is short, and it does.

I bought it from Marty Pulvers, and on my telling him that I meant to get a 2nd tier (he has three) replacement from George Dubos, which is $50.00 or twice the normal charge, who is Precision Pipe Repair, he said that he'd just recommend a $25.00 first tier replacement, that I didn't need the 2nd. My thinking was that I wanted to experience what a fine handcut stem was like; all the pipe gurus who smoke artisan pipes are always touting stem work as one of the most important ingredients of a well-made high-grade. As I don't own any high-grades, my thinking was that this was about the only way I could evaluate the high-grade stem-touters.

But Mr. Dubos didn't answer either of my emails. Any of you have luck in getting him to engage? Also, I still think that my thinking about the 2nd tier stem is accurate. Any thoughts on this?
alfredo_buscatti is offline   Reply With Quote
Old 02-22-2014, 12:02 PM   #2
OnePyroTec
Adjusting to the Life
 
OnePyroTec's Avatar
 
Join Date: Jan 2013
First Name: Wayne
Location: Nevada
Posts: 327
Trading: (2)
Cohiba
OnePyroTec will become famous soon enough
Default Re: Barling Pre-trans Stem Replacement

After two tries, I would move on to someone else. I have had quick replies & service from Norwood on several occasions and there are several others to pick from who can do custom cut stems as well.

You can take a pre-formed stem and re-work it to smoke as well as a custom cut stem, but it won't "LOOK" as nice. If you value your own time, then a custom cut stem is the way to go IMHO because you will be money ahead with a better looking stem.

Now if you want to get real creative, Steve Norse has some cumberland blanks he got in a couple weeks ago. All you need to do is either add a delrin tenon or cut a tenon, fit & sand. They are pre-drilled & shaped @ only $15 each.
OnePyroTec is offline   Reply With Quote
Old 03-05-2014, 10:08 PM   #3
Bruce
Adjusting to the Life
 
Join Date: Oct 2008
Posts: 370
Trading: (2)
Bruce is on a distinguished road
Default Re: Barling Pre-trans Stem Replacement

Try RonnieB at Nightowl Pipe Works. Does incredible work. I had a high grade S. Bang stem made by Ronnie after I broke the tenon and shattered the stem. I could not tell the difference. Plus he will custom tailor the bit to your preferences.
IMHO, better than George, and I had plenty of work done by George
Bruce is offline   Reply With Quote
Old 03-05-2014, 10:38 PM   #4
gravel
Still Watching My Back
 
gravel's Avatar
 
Join Date: Mar 2014
First Name: Geoff
Location: Oregon
Posts: 130
Trading: (3)
gravel is on a distinguished road
Default Re: Barling Pre-trans Stem Replacement

Heya AB,

My understanding is George is easier to reach over the phone.
gravel is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:59 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All content is copyrighted jointly by Cigar Asylum and the content provider.