|
![]() |
#1 |
Guest
Posts: n/a
|
![]()
I've got a Surefire G2 (see below) that I can't get to work. I pulled the batteries and they're putting out a total of 5.5 volts.
I have continuity on the blub from the outer spring to the inner spring. I even ordered a new bulb and it still won't light. I haven't tried new batteries, but isn't 5.5v enough? Any ideas? ![]() |
![]() |
![]() |
#2 |
YNWA
![]() |
![]()
No clue, Chief.
![]()
__________________
Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are. -John Wooden |
![]() |
![]() |
![]() |
#3 |
What will your verse be?
|
![]()
Well, if you have continuity, a new bulb and old batteries...I think you should try new batteries!
Here http://www.flashlightreviews.com/rev...urefire_g2.htm It says that it runs off of 6 volts. So... New batteries........................cheif ![]() Couldn't help myself ![]() |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Thanks Indians, I'll pick some up tomorrow.
|
![]() |
![]() |
#6 |
Thankful.
|
![]()
I have a G2 (as well as numerous other Surefires, mostly for work) and have had the same problem. It turns out those lithium cells get a little old and under no load still test out at a decent voltage, but can't supply enough current (and therefore the voltage drops way dow) to make the bulb happy when put under load. I am pretty sure a new set of batteries will set you straight.
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
Here's the final outcome. When I dropped it a few years ago, I broke the bulb. But when I put a new bulb in (a few years later) it didn't work, so out came the multi meter.
What I didn't know was the batteries had gone dead in the 2 years, so it needed new batteries as well as a new bulb. So $21 later ($16 for the batteries, $5 for the bulb) I've got a working flashlight that I originally paid $25 for. Thank you for all you help, but I'm back to the shotgun forums ![]() |
![]() |