The LGC ping lighter

[Brutus2600]

Buy the replacement flints that were posted earlier in the thread then that little slide on the top of the lighter slides back and you would drop the replacement flint in there. If you look closely you can see the flint in the chamber and how it's positioned.

Originally Posted by ripper

Cigary whomped me upside the head with a generous gift of this exceedingly nice lighter. It's almost too nice to use.
Just what this old Bart needs - another addition to my addiction. Gary has helped me matriculate from matchbooks to BIC lighters to a shelf of butane lighters. Thanks professor -- and watch for those big brown trucks!

Oh no...Bart, tell me you're not going to release the Cigar Hounds of Hell again? I'm still black and blue and bitten from the last blast you sent to me.

Originally Posted by Brutus2600

Buy the replacement flints that were posted earlier in the thread then that little slide on the top of the lighter slides back and you would drop the replacement flint in there. If you look closely you can see the flint in the chamber and how it's positioned.

For us mechanically challenged who don't ever replace flints...is there something written with pictures? I'm speaking for Bart of course.

[Brutus2600]

Originally Posted by Cigary

For us mechanically challenged who don't ever replace flints...is there something written with pictures? I'm speaking for Bart of course.

I can take some pictures friday and post them up, but until then, really all you do is slide that ribbed thing on the very top of the lighter (while it's open) towards the hinge of the lid. If you look down from the top, you'll see a hole right next to where the flame comes out. That's where the flint is (you'll see a tiny cylinder laying on it's side). If you tipped the lighter upside down while holding that slide back, the flint falls out (do this over a white piece of paper or something so you can easily find it).

To put it back in, just drop it in and make sure it lays on it's side and not up and down. If you don't get it in right, your lighter won't spark.

Hope that helps until I can get some pics up.

Originally Posted by Brutus2600

I can take some pictures friday and post them up, but until then, really all you do is slide that ribbed thing on the very top of the lighter (while it's open) towards the hinge of the lid. If you look down from the top, you'll see a hole right next to where the flame comes out. That's where the flint is (you'll see a tiny cylinder laying on it's side). If you tipped the lighter upside down while holding that slide back, the flint falls out (do this over a white piece of paper or something so you can easily find it).

To put it back in, just drop it in and make sure it lays on it's side and not up and down. If you don't get it in right, your lighter won't spark.

Hope that helps until I can get some pics up.

Thanks Brian...ya hear that Bart, he's going to put pictures up for you.

( taking notes just in case no pictures don't come up)

[ripper]

Originally Posted by Cigary

Thanks Brian...ya hear that Bart, he's going to put pictures up for you.

( taking notes just in case no pictures don't come up)

This is my idea of pictures: