Cigar Oasis XL and mold

s15driftking · 02-24-2009, 01:28 PM

Well, i see a little revival of this thread so i will throw out an update.

Tuning an Oasis to work in a vino is very tricky. you must do a lot of guess and check but once you get that dial set in the right position it works like magic, rock solid 64% all day long!

Now, with that being said, i told people that i was having toruble evening out the humidity. It was 4% mroe humid up top than it was below... A simple shifting of a few of my make-shift trays cured the problem right up.

I guess the temporary plastic drawer system was blocking about 85% of the humidity flow. I moved the drawer set up one "Wrung" and put my CC boxes on the bottom where the lower humidity was and the movement let the oasis breath more an balance the entire unit out!

So like i said, i am sitting rock solid at 64% all across the vino.

02-24-2009, 01:28 PM	#7
s15driftking Go Browns! Join Date: Nov 2008 First Name: Bobby Location: Columbus Ohio Posts: 2,763 Trading: (16)	Re: Cigar Oasis XL and mold Well, i see a little revival of this thread so i will throw out an update. Tuning an Oasis to work in a vino is very tricky. you must do a lot of guess and check but once you get that dial set in the right position it works like magic, rock solid 64% all day long! Now, with that being said, i told people that i was having toruble evening out the humidity. It was 4% mroe humid up top than it was below... A simple shifting of a few of my make-shift trays cured the problem right up. I guess the temporary plastic drawer system was blocking about 85% of the humidity flow. I moved the drawer set up one "Wrung" and put my CC boxes on the bottom where the lower humidity was and the movement let the oasis breath more an balance the entire unit out! So like i said, i am sitting rock solid at 64% all across the vino. __________________ diamonds/guns