I had to reformat!!!

[RGD.]

Originally Posted by ucubed

It would not boot normally, it ended up being on the blue screen of death. I started in safe mode, I tried probably at least 10 different tactics to try and resolve the situation and it did not work. Then I was going to reinstall ALL windows drives ONLY, however that part had errors and it then proceeded to reformat my entire C:/. I have a lot of stuff on my external, however I may have lost all your addresses =P

For the future:

Remove hard drive.
Install new hard drive, format and install OS.
Install old drive as a slave or external.
Copy old files over to new drive.

If the old drive has no physical errors - after you are sure nothing is left on it - then reformat it and save in case something happens in the future or use as a slave/USB for daily backups.


Ron

[Ollie]

Originally Posted by RGD.

For the future:

Remove hard drive.
Install new hard drive, format and install OS.
Install old drive as a slave or external.
Copy old files over to new drive.

If the old drive has no physical errors - after you are sure nothing is left on it - then reformat it and save in case something happens in the future or use as a slave/USB for daily backups.


Ron

And get one of THESE.

[SeanGAR]

Originally Posted by RGD.

For the future:

Remove hard drive.
Install new hard drive, format and install OS.
Install old drive as a slave or external.
Copy old files over to new drive.

If the old drive has no physical errors - after you are sure nothing is left on it - then reformat it and save in case something happens in the future or use as a slave/USB for daily backups.


Ron

Great advice. As long as the drive is readable, you should never reformat if you have important files on the drive, rescue them first.

Another option is to have a linux live cd around that you can boot to and use as a rescue disk. Boot to cd, copy important HD files to usb, verify them, and only then do the fdisk/format.

What I also do is to clone the hard drive after all of the software and updates are installed on a clean installation. That way you can quickly get the computer up and running with very little work. I clone to an HD in an external enclosure, so a simple swap will get the computer running again.

File backups are something else, I backup modified files daily and take a backup home weekly. Old school, I run xcopy as a scheduled task or manually for the external.

I also have a portable at home that has the same software installed so if my desktop burned I would be able to work.

[rizzle]

Originally Posted by SeanGAR

Great advice. As long as the drive is readable, you should never reformat if you have important files on the drive, rescue them first.

Another option is to have a linux live cd around that you can boot to and use as a rescue disk. Boot to cd, copy important HD files to usb, verify them, and only then do the fdisk/format.

What I also do is to clone the hard drive after all of the software and updates are installed on a clean installation. That way you can quickly get the computer up and running with very little work. I clone to an HD in an external enclosure, so a simple swap will get the computer running again.

File backups are something else, I backup modified files daily and take a backup home weekly. Old school, I run xcopy as a scheduled task or manually for the external.

I also have a portable at home that has the same software installed so if my desktop burned I would be able to work.

Wha??

[ucubed]

Well I got most of everything set up and it's running better than it was before. Thanks for the advice, but it was not needed, I was just ranting and annoyed by the fact that I couldn't fix it in time. I know a great deal about computers so I got this =).