Any appliance gurus here?

hammondc · 07-26-2012, 01:39 PM

Kenmore 70 series washer. Fills with hot water, then nothing happens. No agitation, no noise. Nothing. Any ideas?

BlkDrew · 07-26-2012, 01:42 PM

Front or top load?

T.G · 07-26-2012, 01:50 PM

Check the microswitch that senses if the lid is open or closed. They typically fail in the electrically open position, so the washer will think that the lid is open and won't agitate.

bobarian · 07-26-2012, 02:06 PM

Sounds like its busted to me.

The Poet · 07-26-2012, 02:16 PM

Quote:

Originally Posted by bobarian

Sounds like its busted to me.

hammondc · 07-26-2012, 02:17 PM

top load. Adam, that switch was my first though. I can depress it manually. Nothing happens. I do not have a multimeter to check it either.

BlkDrew · 07-26-2012, 02:21 PM

Quote:

Originally Posted by hammondc

top load. Adam, that switch was my first though. I can depress it manually. Nothing happens. I do not have a multimeter to check it either.

Disconnect the wires from the switch and put them together, bypassing the switch.

357 · 07-26-2012, 02:21 PM

Find the model number. It'll be long say 16 alpha numeric characters. Then go to SearsPartsDirect.com and punch it in. It'll have multiple diagrams with part numbers. If you can identify the broken part most of the time you can order it on eBay or Amazon at a huge discount compared to Sears prices.

I had a similar thing happen to my Maytag. Ended up being a bad pump pulley. It's a metal pulley moving a plastic finned disc inside a plastic housing. Bearing broke and nothing would move. I would empty it if possible, then tip it back so you can see the bottom. Make sure it's unplugged first. You should see 3 pulleys with one belt around all three. One will be the motor, one the pump, and the other is the agitator. You should be able to move all three by pulling on the belt. If not, take the belt off and see which one is broken or siezed.

My best guess anyway. Sears had my pump for $70+. Got it on Amazon for $22.

Edited to say. I'd try manually depressing the lid switch first. Easiest possible cause.

T.G · 07-26-2012, 02:32 PM

Quote:

Originally Posted by hammondc

top load. Adam, that switch was my first though. I can depress it manually. Nothing happens. I do not have a multimeter to check it either.

The switches fail internally, you might be able to depress them but they still won't make contact.

Get a multimeter - you don't need anything fancy, just something that tests continuity. $5-7 at the hardware store.

T.G · 07-26-2012, 02:33 PM

Quote:

Originally Posted by BlkDrew

Disconnect the wires from the switch and put them together, bypassing the switch.

That's a Darwin award waiting to happen.

The Poet · 07-26-2012, 02:38 PM

Quote:

Originally Posted by T.G

That's a Darwin award waiting to happen.

Why? What's the problem playing with hot wires with your arm in a metal tub full of water?

BlkDrew · 07-26-2012, 02:50 PM

Quote:

Originally Posted by T.G

That's a Darwin award waiting to happen.

Ok, agreed.

hammondc · 07-26-2012, 03:09 PM

Quote:

Originally Posted by BlkDrew

Disconnect the wires from the switch and put them together, bypassing the switch.

Ha ha ha. Thats what I just did. Jumpered the 2 hot-wires into the switch Works now. Hell with safety. Time for a beer and a Gurkha. I feel manly.

Ashcan Bill · 07-26-2012, 04:15 PM

Quote:

Originally Posted by hammondc

Ha ha ha. Thats what I just did. Jumpered the 2 hot-wires into the switch Works now. Hell with safety. Time for a beer and a Gurkha. I feel manly.

Nothing like the sweet stench of success!

07-26-2012, 01:39 PM	#1
hammondc Moar Padrons! Join Date: Aug 2010 First Name: Chip Location: Senoia, GA Posts: 2,626 Trading: (17)	Any appliance gurus here? Kenmore 70 series washer. Fills with hot water, then nothing happens. No agitation, no noise. Nothing. Any ideas?

07-26-2012, 01:42 PM	#2
BlkDrew Rolling my own... Join Date: Dec 2009 First Name: Andrew Location: Rochester NY Posts: 807 Trading: (43)	Re: Any appliance gurus here? Front or top load?

07-26-2012, 01:50 PM	#3
T.G Grrrrrr Join Date: Mar 2009 First Name: The Other Adam Posts: 15,559 Trading: (37)	Re: Any appliance gurus here? Check the microswitch that senses if the lid is open or closed. They typically fail in the electrically open position, so the washer will think that the lid is open and won't agitate. Last edited by T.G; 07-26-2012 at 01:58 PM.

07-26-2012, 02:06 PM	#4
bobarian Cranky Habanophile Join Date: Oct 2008 Location: Wine Country Posts: 8,869 Trading: (51)	Re: Any appliance gurus here? Sounds like its busted to me.

07-26-2012, 02:17 PM	#6
hammondc Moar Padrons! Join Date: Aug 2010 First Name: Chip Location: Senoia, GA Posts: 2,626 Trading: (17)	Re: Any appliance gurus here? top load. Adam, that switch was my first though. I can depress it manually. Nothing happens. I do not have a multimeter to check it either.

07-26-2012, 02:21 PM	#8
357 Will herf for food Join Date: Oct 2008 First Name: Mike Location: Home is where I park it Posts: 4,075 Trading: (9)	Re: Any appliance gurus here? Find the model number. It'll be long say 16 alpha numeric characters. Then go to SearsPartsDirect.com and punch it in. It'll have multiple diagrams with part numbers. If you can identify the broken part most of the time you can order it on eBay or Amazon at a huge discount compared to Sears prices. I had a similar thing happen to my Maytag. Ended up being a bad pump pulley. It's a metal pulley moving a plastic finned disc inside a plastic housing. Bearing broke and nothing would move. I would empty it if possible, then tip it back so you can see the bottom. Make sure it's unplugged first. You should see 3 pulleys with one belt around all three. One will be the motor, one the pump, and the other is the agitator. You should be able to move all three by pulling on the belt. If not, take the belt off and see which one is broken or siezed. My best guess anyway. Sears had my pump for $70+. Got it on Amazon for $22. Edited to say. I'd try manually depressing the lid switch first. Easiest possible cause. __________________ “Eating and sleeping are the only activities that should be allowed to interrupt a man's enjoyment of his cigar;” Mark Twain