How to seal a cabinet Humi???

[Zoomschwortz]

Originally Posted by Footbag

Just a thought here...

The door having play when you push the side of the cabinet is not necessarily a bad thing. I'm in the furniture business, and if a door is crooked, the first thing you try to do is level the piece. 90% of the time this fixes the problem. I've seen armoires that cost more then cars do this.
If a humidor isn't level, and the door is not strait, you will likely lose humidity. Make sure the piece is level. Hope it helps.

When I got the humidor home, I noticed it was leaning to the side when I set beside a large bookshelf/cabinet.

In order to get it setting straight, I had to place some shims between the bookshelf and humidor. It is now sitting straight and after adding some thin closed cell weather stripping, the door to cabinet seal is very solid and good.

If I were to glue all of the seams, I'm thinking that it may add some strength to the whole cabinet as well as slow down some of the RH loss. I am also considering an X-brace in the back as suggested.

I have also been kicking around the idea of buying some Spanish cedar and adding an extra layer inside the cabinet. Funny thing about the cedar, it is looking like the 1/4" costs less than the 1/8".

Take care
Ken