Shuriken cutter

[icehog3]

Originally Posted by bevo

I have used one of these cutters for about four months. In hindsight, every cigar cut with a guillotine, a punch, or a v-cut, has been waste.

I cut about three cigars before I got the hang of it. Now, when I pull out a 50 or bigger, I reach for this cutter instead of a guillotine or a punch.

I do not smoke anything under 50 so I cannot tell you how cigars with different cuts compare.

I can taste a difference though. The six slits provide a cooler, more even draw compared to the guillotine. Unlike the punch, I can smoke any 50 or wider cigar down to about a half an inch without losing any taste or suffering tar issues.

Side note: with the six blade cutter or the punch, I have never had a tar problem. I guess I am lucky.

As to the enthusiasts who use Xcto knives, more power to you. My hands are not steady enough nor do have I have the patience to wield such an instrument to cut a cigar. Instead, I will use my six blade cutter to achieve a potentially similar effect.

So, how long have you worked for the company?

Out of curiousity, why would you say every cigar you ever cut with another cutter was a waste?

Originally Posted by icehog3

So, how long have you worked for the company?

No, I do not work for the company. I am just fanboy of the product.

Originally Posted by icehog3

Out of curiousity, why would you say every cigar you ever cut with another cutter was a waste?

With other cutters, I do not enjoy the last third of the bigger cigars because they burn too hot and deliver too much smoke. With a guillotine cut but not a punch cut, some bigger cigars had a tendency to burn unevenly. With the six slits, though, I can smoke almost all the cigar (usually down to the last inch or so depending on the brand).
With the six slits, the draw is more even and is cooler.