|
![]() |
#4 |
Grrrrrr
![]() |
![]()
It would be greatly helpful if you could tell us a bit more about the humidors & coolers, like approximate size, how full, and what type of humidification source you are currently using and how much. Also, if you are going by hygrometer readings, have you tested / calibrated your hygrometer?
Such being said, assuming that your humidors and coolers don't leak like sieves, the general fix is to add additional humidification capacity. If you are using beads, add more beads. Or you could add a few waterpillows or a jar of gel such as Humi-Care or Cigar Mechanic. If it's a credo (the foam thing in the plastic case that you charge with PG/H2O solution), if you must keep it, add a jar of gel or pillows, although the best solution would be to throw them out and get beads. It's likely we can rule out active humidification for your humidors & coolers as if it functioning properly, you shouldn't have any issues unless it severely undersized for the space - in which case, fix it, replace it or get a larger one. |
![]() |
![]() |