Coolerdor RH levels - Page 2

Jbailey · 03-09-2010, 09:42 AM

The only thing I can think of.
Would wetting all your beads be a problem? I use about a pound of beads in each of my 120qts. I know the extra helps regulate it better but if they are all wet it might be harder on the 40qt.

Volt · 03-09-2010, 11:33 AM

I shoot for 65%. Plus or minus 2% - 3% doesn't wreck my life.

kenstogie · 03-09-2010, 11:57 AM

I am fine with a 62-70% reading (I have 70% Beads) but I have done the salt test on these and they read 2-3 points lower than actual. At 75% I was concerned about splitting mold etc. I will go back and check again I'm hoping it was just a wacky reading.

-another good reason to keep your stix in the celo, it help even out rh changes

03-09-2010, 09:42 AM	#1
Jbailey Brewcifer Join Date: Oct 2008 First Name: Dave Location: Madison, WI Posts: 5,216 Trading: (17)	Re: Coolerdor RH levels The only thing I can think of. Would wetting all your beads be a problem? I use about a pound of beads in each of my 120qts. I know the extra helps regulate it better but if they are all wet it might be harder on the 40qt. __________________ "Sent to spy on a Cuban talent show first stop- Havana au go-go." Field Marshall Douche Bag.

03-09-2010, 11:33 AM	#2
Volt I'm nuts for the place Join Date: Oct 2008 Posts: 2,799 Trading: (19)	Re: Coolerdor RH levels I shoot for 65%. Plus or minus 2% - 3% doesn't wreck my life. __________________ Curing the infection... One bullet at a time.

03-09-2010, 11:57 AM	#3
kenstogie following the whiterabbit Join Date: Mar 2009 Location: Albany, NY Posts: 1,325 Trading: (3)	Re: Coolerdor RH levels I am fine with a 62-70% reading (I have 70% Beads) but I have done the salt test on these and they read 2-3 points lower than actual. At 75% I was concerned about splitting mold etc. I will go back and check again I'm hoping it was just a wacky reading. -another good reason to keep your stix in the celo, it help even out rh changes __________________ I intend to live forever. So far, so good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode