(Official?) Pocket Knife Discussion Thread

[fbillings14]

When i contacted strider this is the message they sent back telling me about the knife

"The knife is a product Strider KNives Manufactures directly for Department of Defense clients.
It is manufactured from a very special alloy of Copper Beryllium.
This alloy is employed where NON-SPARKING requirements are at hand.
We have been making this product which is our design, for over 10 years now and the product received a National Stock Number several years ago.
It is still being ordered, made and shipped to units today."

[SteveH]

That's cool ! is it ceramic or some composite material ?

[TripleF]

Was just bombed this Kershaw Needs Work 1820 Ken Onion Speed assisted opening knife by Wolfgang, in exchange for doing a review on it on my blog: www.PocketKnivesBlog.com (I already did the review :D )

http://i212.photobucket.com/albums/cc32/fishforfree2/kershawneedswork028.jpg

[Bill86]

When i contacted strider this is the message they sent back telling me about the knife

"The knife is a product Strider KNives Manufactures directly for Department of Defense clients.
It is manufactured from a very special alloy of Copper Beryllium.
This alloy is employed where NON-SPARKING requirements are at hand.
We have been making this product which is our design, for over 10 years now and the product received a National Stock Number several years ago.
It is still being ordered, made and shipped to units today."

A very nice choice, you'll enjoy your Strider they are built like friggen tanks....maybe better. Hard to argue with the warranty as well. $15 bucks and whatever you did to it is good as new. If you are actually capable of putting a scratch on that bad motherf**ker.

[SteveH]

agreed - serious badass

[MurphysLaw]

Read this thread yesterday, snapped a few quick and dirty pics with my iPhone:

http://i25.photobucket.com/albums/c82/Brian32FSU/311664a6.jpg

Master's of Defense Dieter CQD Spec Ops Trainer Auto- this was my main duty knife for years

http://i25.photobucket.com/albums/c82/Brian32FSU/a40efa1d.jpg

Robbie Dalton Militia Recon - Learned the Robbie has recently retired, so this knife has been retired to the safe

http://i25.photobucket.com/albums/c82/Brian32FSU/5c561a9c.jpg

Benchmade 9500 Auto - my EDC knive

http://i25.photobucket.com/albums/c82/Brian32FSU/be8a93e4.jpg

My Microtechs - top to bottom - Vector-A auto, UT70 OTF, SOCOM Elite-A

[MurphysLaw]

http://i25.photobucket.com/albums/c82/Brian32FSU/a3349c39.jpg

My S&W autos - Spec Ops Tanto, SWAT 1st millennium run, Extreme Ops

http://i25.photobucket.com/albums/c82/Brian32FSU/2e2774a0.jpg

Boker AK74 - black reverse tanto, desert tan half serrated

http://i25.photobucket.com/albums/c82/Brian32FSU/0c9b70e6.jpg

A couple of my non-autos - Breitling Wenger swiss army, White Spyderco dragonfly

[SteveH]

Black Boker AK :dr:dr

[MurphysLaw]

Black Boker AK :dr:dr

Loved the blade on that when I ordered it, just couldn't resist...

[Remo]

Here are mine, a Benchmade auto folder in the pocket and a Cold Steel punch knife that stays attatched to my duty rig (in sheath).

[BnBTobacco]

http://i25.photobucket.com/albums/c82/Brian32FSU/a3349c39.jpg

My S&W autos - Spec Ops Tanto, SWAT 1st millennium run, Extreme Ops

http://i25.photobucket.com/albums/c82/Brian32FSU/2e2774a0.jpg

Boker AK74 - black reverse tanto, desert tan half serrated

http://i25.photobucket.com/albums/c82/Brian32FSU/0c9b70e6.jpg

A couple of my non-autos - Breitling Wenger swiss army, White Spyderco dragonfly

I love these... :dr

[GWN]

Nice looking deal here:
http://www.amazon.com/gp/product/B000UUV1EY?tag=dealnewscom&m=ATVPDKIKX0DER

[Bill86]

Here are mine, a Benchmade auto folder in the pocket and a Cold Steel punch knife that stays attatched to my duty rig (in sheath).

What do you think of the cold steel punch knives?

[Remo]

What do you think of the cold steel punch knives?

Mine is the Safe Keeper II and while I have yet to put it through anyone's skull, I have no doubt that I could. Very well built and extremely sharp. The sheath has plenty of tie down holes so it is easily attatched to things and it is very secure in the sheath.

[Wolfgang]

Went to Bill Jackson's sporting goods and picked up a Mini barrage. Couldn't help it. and cant wait to see what it looks like after I thump on it for 10 years.

http://i103.photobucket.com/albums/m135/wolfgang8810/Screenshot2011-04-18at123342AM.png?t=1303101493

[longknocker]

Went to Bill Jackson's sporting goods and picked up a Mini barrage. Couldn't help it. and cant wait to see what it looks like after I thump on it for 10 years.

http://i103.photobucket.com/albums/m135/wolfgang8810/Screenshot2011-04-18at123342AM.png?t=1303101493

Beautiful Knife, Mark!:tu

[backwoods357]

My everyday carry knife is a Columbia River Knife & Tool (CRKT) "Point Guard" [Right] and my occasional carry is a CRKT "Vele Wasp" [Left].
I have really abused the PG and it's held up perfectly over the last three years.
BTW I paid less than $30 for those knives together, I treat my everyday carry too rough to actually invest a whole lot into it.
http://i36.photobucket.com/albums/e17/Darth_Jism/cig/th_PhotoApr1860420PM.jpg (http://s36.photobucket.com/albums/e17/Darth_Jism/cig/?action=view&current=PhotoApr1860420PM.jpg)
*clickable thumbnail*

[SteveH]

I like the blade profile on the CRKT...Nice.

[TripleF]

Went to Bill Jackson's sporting goods and picked up a Mini barrage. Couldn't help it. and cant wait to see what it looks like after I thump on it for 10 years.

http://i103.photobucket.com/albums/m135/wolfgang8810/Screenshot2011-04-18at123342AM.png?t=1303101493


Dude, that rocks.....and the pic is astounding!!! :tu

[TripleF]

This vintage Imperial cracked ice just came in the mail today!


http://i212.photobucket.com/albums/cc32/fishforfree2/ImperialCracklePocketknife001.jpg

[replicant_argent]

Darth Jism?

[backwoods357]

Hush, you.

[SteveH]

So this came in the mail last week. I had wanted the wooden inserts - but this is what came instead. Might return....might just use this as a chance to make some custom inserts...Anyone tried this before ?

https://lh3.googleusercontent.com/_IPGHyT92a24/TbV6XV6MsRI/AAAAAAAAG28/DusmMrIe_2U/s600/IMG_00137.jpg
https://lh5.googleusercontent.com/_IPGHyT92a24/TbV6ZJPbnmI/AAAAAAAAG3A/X6b05OzGlt4/s600/IMG_00138.jpg

[TripleF]

Newest member of the 3F family.....Spyderco Tenacious! (the cigar is new, but it won't be for long).

http://i212.photobucket.com/albums/cc32/fishforfree2/SpydercoTenacious003.jpg

[MurphysLaw]

Nice pickup Scott, had my eye on a similar spyderco with an OD green handle, never got around to buying one :hm

[Wolfgang]

Newest member of the 3F family.....Spyderco Tenacious! (the cigar is new, but it won't be for long).

http://i212.photobucket.com/albums/cc32/fishforfree2/SpydercoTenacious003.jpg

I just picked up the tenacious' older brother the resilience. Gotta love that 4+" blade. Woot

[TripleF]

Just scored these for review on PocketKnivesBlog.com


Browning Burl Wood Titanium Linerlock knife:

http://i212.photobucket.com/albums/cc32/fishforfree2/asstdknifess013.jpg


Frontier The All American lockback

http://i212.photobucket.com/albums/cc32/fishforfree2/asstdknifess004.jpg

[issues]

Here is my current EDC:

Kershaw Select Fire
http://img.photobucket.com/albums/v45/issues1975/Img_4485-1.jpg

Got a nice discount due to it being a display without packaging. :tu

[Blak Smyth]

I know it isnt a pocket knife, but it is really all I own.
It is a Gerber that was my fathers, it looks very much like the Mark II in the picture.
It is one of the few things I have to remember him by, it has been in my possesion since his passing about 25 years ago.

http://www.gerbergear.com/images/products/22-01874-1.jpg

[Scothew]

I know it isnt a pocket knife, but it is really all I own.
It is a Gerber that was my fathers, it looks very much like the Mark II in the picture.
It is one of the few things I have to remember him by, it has been in my possesion since his passing about 25 years ago.


And I am sure you'll have it forever :tu

Just scored these for review on PocketKnivesBlog.com


Browning Burl Wood Titanium Linerlock knife:


:dr I really like the look of that knife. Its got that perfect browning look with that particular choice in wood and all.

[Wolfgang]

I have a few coming in the mail. Pics when they come in.

[Tyler]

I don't know if this has been asked before but what is the best way to sharpen a pocket knife? I have CRKT M16-10KZ that has lost its edge.

http://www.cgwgun.com/images/products/CRM16-10KZ.gif

[Blak Smyth]

Forgot I have this Buck

http://farm7.static.flickr.com/6008/5933527688_80c29f0f3a.jpg

[Wolfgang]

for tantos you need to do each edge separately. Focus on the belly then do the tip where the angle starts. If you do both at the same time you will round off your secondary point. I use http://www.basspro.com/Lansky-Sharpening-System--Standard-Kit/product/41168/-405783?cmCat=CROSSSELL_THUMBNAIL Its cheap and effective. Just remember to count your strokes or you will throw off the blade geometry.

Mailman is here but is taking FOREVER to do everyones boxes. Pictures of my new blade when I can get my grubby paws on it.

Neat little buck Blak Smyth

[Wolfgang]

ITs here Its here!!

http://i103.photobucket.com/albums/m135/wolfgang8810/IMG_0137.jpg?t=1310581791

Benchmade 860 Bedlam
154CM stainless steel blade (58-61HRC)
Black G10 textured handle scales with 420J stainless steel black oxide liners and a reversible tip-up pocket clip
BLADE LENGTH 3.95" (10.03 cm)
BLADE THICKNESS 0.125" (3.175mm)
OPEN 9.71" (24.66 cm)
CLOSED 5.76" (14.64cm)
WEIGHT 7.10oz (201.28g)
HANDLE THICKNESS 0.60" (15.18mm)

[issues]

Sweet blade Mark!!! :tu

[kelmac07]

Don't come to Epic without one. :r :r :r

[Jasonw560]

My EDC now is a Leatherman Wave. Before I got that, I carried a SAK Explorer, and a Cold Steel Voyager. On trips and such, I still stick the CS in my front right pocket. The wave either in the pocket or sheath, depending on what I am dong that day.

[ambientboy]

I carried a SpyderCo Delica for years until I lost it and was pissed. I bought a Benchmade Aphid that I carried for a bit before I gave it to my brother as a New Zealand present when he left the US to shear sheep with the Kiwis.

Now I carry an Benchmade Axis (580S assisted open):

http://www.gpknives.com/images/benchmade/580S%5Blarge%5D.jpg

I'm not gonna lie, I've cut my fair share of triple caps with this puppy.

The knife that's in my car is the SOG Seal Pup which has survived many a backpacking excursion, salt water use, and backpacking in Italy and New Zealand. I love that knife.

My other regulars are Buck hunters, the SOG Northwestern Ranger, classic Leatherman tool, SOG tool, Gerber tool, and assorted Swiss Armies I've picked up throughout the years. I am dying for the Benchmade Infidel next...but for now it's way out of my paygrade. Summer is the slow season.

[Bill86]

I've held the Infidel a few times, unless you REALLY want it....I'd get a Microtech Scarab instead, preferably an older one. Maybe a 06 or earlier "safe queen".

[camiller]

Victorinox Tinker, the one MacGyver carried the most often (although he was also known to carry the Huntsman and Spartan as well). Also have a Victorinox Classic on the key chain as a admittedly diminutive backup. Would like to find an inexpensive multi-tool that I could customize a bit (i.e. that I could disassemble and fabricate a beer faucet wrench for)

[ambientboy]

I've held the Infidel a few times, unless you REALLY want it....I'd get a Microtech Scarab instead, preferably an older one. Maybe a 06 or earlier "safe queen".

Why's that? I've played with a few Infidels. What do you like about the Scarab?

[Bill86]

Why's that? I've played with a few Infidels. What do you like about the Scarab?

The Microtechs are slimmer, carry amazingly well. I mean seriously I forget I'm carrying my Ultratech all the time. I like the position of the thumb slide better on the Microtechs.

IMHO the Infidels are just priced too high for what they are. They need to slim them down. The Microtechs also weigh about half as much. They literally aren't there. Great carry knives.

Much more options with the Microtechs as well.

I'd get an old one though. My 06 has no hangups and works wonderfully every time. The new ones are for $hit.

[emopunker2004]

http://farm7.static.flickr.com/6141/5935300730_afba378c86_z.jpg (http://www.flickr.com/photos/thestemens16/5935300730/)
IMAG0355 (http://www.flickr.com/photos/thestemens16/5935300730/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

My 3 knives:
S&W Extreme Ops auto folder
S&W Extreme Ops manual folder
S&W M&P assisted open

What can I say, I love me some S&W knives. :D

[ambientboy]

The Microtechs are slimmer, carry amazingly well. I mean seriously I forget I'm carrying my Ultratech all the time. I like the position of the thumb slide better on the Microtechs.

IMHO the Infidels are just priced too high for what they are. They need to slim them down. The Microtechs also weigh about half as much. They literally aren't there. Great carry knives.

Much more options with the Microtechs as well.

I'd get an old one though. My 06 has no hangups and works wonderfully every time. The new ones are for $hit.


Thanks for the advice!

[TripleF]

Knice knives boyz.

I got a couple. This BUCK 327-T has moved into the forefront as my pocket clipped EDC.
http://i212.photobucket.com/albums/cc32/fishforfree2/BUCK327TNoblemanFoldingPocketKnife.jpg


And a knice USA made Great Eastern Cutlery Barlow style

http://i212.photobucket.com/albums/cc32/fishforfree2/LotKnifePics010.jpg

[issues]

Love that Buck Scott!!! :tu

[kickerb]

Here is my new pocket knife. I lost my last one. :sh

Kershaw Skyline :noon

http://img847.imageshack.us/img847/7779/photo1kj.jpg

[kickerb]

The knife I lost was a Kershaw Blur :(

[Wolfgang]

My 06 has no hangups and works wonderfully every time. The new ones are for $hit.

I strongly disagree. Currently Microtechs customer service sucks but ive noticed no difference in the QC since they moved from Florida. All of mine fire just as strong never had a misfire. If you CAN find an older one go for it but like ive said i havent noticed any differences.

I do however agree that Microtech is far better than the Infidel. The benchmade has significantly more blade play than any of the microtechs. For an EDC I would go with either the ultratech at ~3.5" or the slimmer but shorter and more expensive troodon ~3. Just my experience and .02

Stay Sharp.

[TripleF]

Love that Buck Scott!!! :tu

Yeah, for an import it's a darn knice knife and freakin' A sharp bro!

[Wolfgang]

Buck had always done a nice job

[kelmac07]

Here are mine...

This little Gerber stays in my pocket
http://i672.photobucket.com/albums/vv82/kelmac07_photo/IMG_3656.jpg

Another Gerber (handle is too bulky)
http://i672.photobucket.com/albums/vv82/kelmac07_photo/IMG_3654.jpg

My Benchmade (switchblade)
http://i672.photobucket.com/albums/vv82/kelmac07_photo/IMG_3659.jpg

[LostAbbott]

Wow mac you even take pictures of knives on doilys :)

[designwise1]

Another one of my hobbies...
My everyday knife is usually a Boker. Dad passed away with cancer last April and in August some meth heads broke in my house while I was at work and stole every knife in the house (including those of my dad and my son's--even the hunting knives). We recovered more than half of them but for almost a month the Boker that was in my pocket that day was the only knife I had left. Dad had several German knives and custom made knives. He was a former meat cutter and loved Solingen steel. I really like Kershaw knives but only have a couple now.

[kelmac07]

Wow mac you even take pictures of knives on doilys :)

You'll never be confused on whose pictures they are. :D :D

[LostAbbott]

You'll never be confused on whose pictures they are. :D :D

I think I need to see some pictures of your new AR-15... :tu

[emopunker2004]

so what seems to be the general consensus on Spyderco Knives? I was thinking about picking up a Spyderco Endura or Resilience or Pacific Salt and maybe a Tenacious.

[Wolfgang]

so what seems to be the general consensus on Spyderco Knives? I was thinking about picking up a Spyderco Endura or Resilience or Pacific Salt and maybe a Tenacious.

I have three of the four. The resilience is wonderfully priced for a 4" blade. But the size isnt quite people friendly. The tenacious seems to be the best of both world. Im not a huge fan of the endura only because its a lockback and isnt quite as fast to close as the Resilience or tenacious so i find i leave it home more often than the others. Same goes for the Pacific salt. Lockbacks are too slow for me but the H-1's rust resistance is impressive. Consider this if you are an avid boater or live near the sea. The 8cr13/14MOV steel in the resilience/tenacious is easy to sharpen but will rust on you if you dont keep a thin layer of oil on it. Whenever i find myself by the beach or water I just wipe some face grease on it for peace of mind. :ss

All this is my personal opinion ymmv.

[Steve]

I have carried this Spyderco for many years around town, in the woods and on the boat in fresh and salt water. It has been immersed in both fresh and saltwater numerous times and I have had no problems with it. I do rinse it off in fresh water after being in salt, and I try to keep it oiled, but that is just regular preventative maintenance. Similar to a gun, you gotta take care of it.

http://spyderco.com/pix/products/large/C36GBK_L.jpg

[Devanmc]

used abused, screw driver, pick, chisel and small pry bar, oh yeah and a knife

http://i94.photobucket.com/albums/l89/devanmc436/IMAG0045.jpg
http://i94.photobucket.com/albums/l89/devanmc436/IMAG0046.jpg
http://i94.photobucket.com/albums/l89/devanmc436/IMAG0048.jpg

its spring loaded which is kinda illegal here i think but oh well.

[Wolfgang]

I have carried this Spyderco for many years around town, in the woods and on the boat in fresh and salt water. It has been immersed in both fresh and saltwater numerous times and I have had no problems with it. I do rinse it off in fresh water after being in salt, and I try to keep it oiled, but that is just regular preventative maintenance. Similar to a gun, you gotta take care of it.

http://spyderco.com/pix/products/large/C36GBK_L.jpg

CPM S30V is much more resistant to rust than 8cr13MOV. It also commands a higher price too. Gotta love the Paramilitary.

used abused, screw driver, pick, chisel and small pry bar, oh yeah and a knife


its spring loaded which is kinda illegal here i think but oh well.

Its nice to see a well worn knife. Just a fun fact. Camillus has gone out of business and many people are now finding their blades to be collectable.

[Steve]

CPM S30V is much more resistant to rust than 8cr13MOV. It also commands a higher price too. Gotta love the Paramilitary.

Gotta love my wife for spending the money on me. She gave it to me several Christmas' ago :tu:tu

[emopunker2004]

well it is done. I picked up a Spyderco Endura 4 Full Flat Ground with the Gray handle. Might pick up another for a gift to my bro who is a cop in Gainesville, FL

[Devanmc]

CPM S30V is much more resistant to rust than 8cr13MOV. It also commands a higher price too. Gotta love the Paramilitary.



Its nice to see a well worn knife. Just a fun fact. Camillus has gone out of business and many people are now finding their blades to be collectable.

well worn, and its only 4-6months of use. But i regularly sharpen it becuase its really abused. Holding up very well though. Im impressed.

ive noticed. Thats why 2 of my knives are camillus. Picked them up on ebay. this is the other one.

http://i94.photobucket.com/albums/l89/devanmc436/IMAG0050.jpg
single bevel good to beat on **** with and really abuse.

[emopunker2004]

Spyderco Endura 4 FFG Gray came intoday :noon
This ****er is pretty big :r
Here's a pic of it next to one of my other EDC blades, a S&W M&P assisted opener.

http://farm7.static.flickr.com/6143/5968228002_9ce4c00ccd_z.jpg (http://www.flickr.com/photos/thestemens16/5968228002/)
IMAG0370 (http://www.flickr.com/photos/thestemens16/5968228002/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

[Devanmc]

i have a question. I do alright with my sharpener but lets be honest there is much better. None of this mechanical or newb v junk. I want to do it myself.

current
http://i94.photobucket.com/albums/l89/devanmc436/IMAG0053.jpg

[Wolfgang]

i have a question. I do alright with my sharpener but lets be honest there is much better. None of this mechanical or newb v junk. I want to do it myself.



Where was the question? :ss

[emopunker2004]

Where was the question? :ss

:tpd:

[Devanmc]

Where was the question? :ss

i ment to put it in there. ADH....oh shiny


anyways, what kind of sharpener should i upgrade to?

[emopunker2004]

i ment to put it in there. ADH....oh shiny


anyways, what kind of sharpener should i upgrade to?

spyderco triangle

[Devanmc]

how on earth do i use that? im used to my 2 stones.

[WyGuy]

Yesterday was a sad day for me. Lost my BM Griptilian that I'd had for less than 2 months. Not really sure how it happened had it clipped to my pants pocket, but walking around a muddy jobsite some how it worked itself out.

[wayner123]

Check out Murray Carter for sharpening advice.

[LostAbbott]

Just picked up a new "travel" knife the Kershaw Skyline. http://www.kershawknives.com/productdetails.php?id=430&brand=kershaw

Got it for $30 on Amazon, I know it is not the super fancy knife I usually pick up, but it is stunning for a $30 knife. I highly recommend this knife to anyone.

[emopunker2004]

Just picked up a new "travel" knife the Kershaw Skyline. http://www.kershawknives.com/productdetails.php?id=430&brand=kershaw

Got it for $30 on Amazon, I know it is not the super fancy knife I usually pick up, but it is stunning for a $30 knife. I highly recommend this knife to anyone.

kickerb just picked one of those up. the seem to get raving reviews over on bladeforums.

I just ordered one of these this morning from amazon...
http://spyderco.com/catalog/details.php?product=294
should go nicely with the Spyderco Endura 4 i have :D

[kickerb]

Just picked up a new "travel" knife the Kershaw Skyline. http://www.kershawknives.com/productdetails.php?id=430&brand=kershaw

Got it for $30 on Amazon, I know it is not the super fancy knife I usually pick up, but it is stunning for a $30 knife. I highly recommend this knife to anyone.yup, i love mine.

[Devanmc]

Check out Murray Carter for sharpening advice.

well i dont want to spend 200bucks on stones. Im not that crazy and the only advice stuff on his website i have to buy books and dvds. I just want a decent stone.

[emopunker2004]

well i dont want to spend 200bucks on stones. Im not that crazy and the only advice stuff on his website i have to buy books and dvds. I just want a decent stone.

There's a guy on blade forums who will put a NICE edge on them for you for $1/per inch.
If you have a bench grinder check out buying some paper wheels:D

[TheRiddick]

well i dont want to spend 200bucks on stones. Im not that crazy and the only advice stuff on his website i have to buy books and dvds. I just want a decent stone.

Go to better kitchen supply stores, of chef supply (whatever they are called in your area) and buy Japanese water stones, they are not that expensive and work like a charm. Sushi chefs use them and I can't imagine a sharper edge than that. You can also buy them on Amazon last time I looked. Easy to use as well.

[emopunker2004]

My newest purchase, Spyderco Tenacious

http://farm7.static.flickr.com/6027/5992872884_6c98778886_z.jpg (http://www.flickr.com/photos/thestemens16/5992872884/)
IMAG0374 (http://www.flickr.com/photos/thestemens16/5992872884/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

[Angry_Pirate]

I threw some flashlights in for fun;s We have here a Kershaw Tanto Groove, Kershaw Junkyard dog II composite, Coast LED Lenser, Coast LED Lenser T7, and a Surefire 6P. I have to many flashlights and need to get rid of some :td I would trade for some cigars if anyone is interested :)

[LostAbbott]

I just got one of those coast lensers for my car flash light. It puts out a sick amount of light. Might not even need my .45 just blind the fool with the light and kick em in the nuts.
Posted via Mobile Device

[Angry_Pirate]

I agree :tu, Coast makes some bright lights with good quality. I would like to get a Coast x21 someday :dr

I just got one of those coast lensers for my car flash light. It puts out a sick amount of light. Might not even need my .45 just blind the fool with the light and kick em in the nuts.
Posted via Mobile Device

[Wolfgang]

Just picked up the limited edition ESEE Izula #6 out of 250. I love the color!!!

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251470_2279456588040_1297536532_2744372_6780882_n. jpg

[Bill86]

There's a guy on blade forums who will put a NICE edge on them for you for $1/per inch.
If you have a bench grinder check out buying some paper wheels:D

He's good people, his name is Richard. He sharpened my MT Ultratech for me at the same price. Heck of a guy, send your knives to him with confidence :tu

[Devanmc]

http://i94.photobucket.com/albums/l89/devanmc436/IMAG0092.jpg
:sh

[Devanmc]

He's good people, his name is Richard. He sharpened my MT Ultratech for me at the same price. Heck of a guy, send your knives to him with confidence :tu

where do i find this guy on the forum?

[wayner123]

well i dont want to spend 200bucks on stones. Im not that crazy and the only advice stuff on his website i have to buy books and dvds. I just want a decent stone.

You need to dig further into his site young padawan.

You can use his techniques on any stone. If you don't want to spend the money on a quality stone, then you have 2 other options. Go get a $5 sharpener and be satisfied. Or send it out to be sharpened.

[wayner123]

where do i find this guy on the forum?

I'll feed you baby bird:

http://www.bladeforums.com/forums/showthread.php/861580-Professional-knife-sharpening?highlight=richard+knife+sharpening

[Devanmc]

well thank you, i didnt see that section. since i have never used that forum. i have a dive knife that is all screwed up. so im just going to send it out.

[wayner123]

well thank you, i didnt see that section. since i have never used that forum. i have a dive knife that is all screwed up. so im just going to send it out.

If you use it on duty, Richard will sharpen it for free for military.

[Devanmc]

i left the military a few months ago. so i dont qualify.

[Wolfgang]

Any new blades nut jobs?

[irratebass]

I have a Smith & Wesson Extreme Ops that was given to me my by relative, I carry it all the time unless I am wearing shorts, looks funny.

[Hutch]

Crkt m21-02

[physiognomy]

Field trip!

http://farm7.static.flickr.com/6179/6157536541_38055b6012_z.jpg

http://farm7.static.flickr.com/6077/6157536535_c1218ffbc8_z.jpg

http://farm7.static.flickr.com/6073/6157536547_0e82ee19f2_z.jpg

I've decided this will be my next knife...

http://farm7.static.flickr.com/6161/6157536549_910bcffb38_z.jpg

[Tbagley]

Field trip!

http://farm7.static.flickr.com/6179/6157536541_38055b6012_z.jpg

http://farm7.static.flickr.com/6077/6157536535_c1218ffbc8_z.jpg

http://farm7.static.flickr.com/6073/6157536547_0e82ee19f2_z.jpg

I've decided this will be my next knife...

http://farm7.static.flickr.com/6161/6157536549_910bcffb38_z.jpg

Nice place to make a selection from!

[TripleF]

I'm now a Mark Twain fan. Love this Imperial Mark Twain Barlow knife:

http://i212.photobucket.com/albums/cc32/fishforfree2/IMPERIALMarkTwainBrlowknife004.jpg

[Wolfgang]

That there is sexy, Scott. You coming to epic?

[colinb913]

Winchester two blade
Little swiss army
Gerber FAST draw
Winchester single blade
Not Pictured:
Fixed blade winchester (stays in my tacklebox)
Gerber Evo mid serrated tanto (currently MIA)

When I am not at school, I pretty much have the Gerber FAST on me at all times, right between my back right pocket and my middle right side belt hoop on my hip. Great knife! Opens quick, not a pain to close with one hand, and it is sharp as hell.

[TripleF]

That there is sexy, Scott. You coming to epic?

Thanks Mark! Hoping to be at EIV!!

[Steve]

Hoping...:hm

[WittyUserName]

I carry a SOG Trident with me all the time.

http://www.knifeworks.com/images/products/detail/SOGTF3.jpg

[MrClean]

Ken Onion designed Kershaw knives. I thought I lost one and bought another before finding the original. For me, these are the best pocket knives I've owned, one is always with me.

https://lh6.googleusercontent.com/-Q_UiOVo-lz0/Ton4jF2APhI/AAAAAAAAAYc/NAxc3BGfIrk/s640/IMG_20111003_074820.jpg

[Lonely Raven]

Wow, those Spiderco fieldtrip shots are great!

I can't get into knives...I have too much of a "need one of everything" personality.

I did used to EDC some really nice limited production butterfly knives...but as I got older, I realized the risk of getting busted with them, or at very least having them confiscated it too great.

I guess I'm growing up.

Now I just carry a cheap Gerber from Walmart (I lose them enough it better be cheap), and I have a Mora for camping.

I did have one of these exquisite Swamp Rat Waki (small sword), but I couldn't bring myself to actually *use* it, and wound up selling it for $100 more than I paid for it just recently!

http://i2.guns.ru/forums/icons/forum_pictures/000622/622777.jpg

[Lonely Raven]

On a side note, one of the smartest men I've ever known once taught me:

Never trust a man who doesn't carry a knife; never trust a man whose knife is dull.

[MrClean]

I guess I'm growing up.


:td:td:td


Never trust a man who doesn't carry a knife; never trust a man whose knife is dull.

I like that philosophy.

[Devanmc]

Decided i need to upgrade in the coming months.

http://graymanknives.com/dua.html

:sh

[Devanmc]

Heard great things about them from some military friends of mine but what do you guys think?
Posted via Mobile Device

[Wolfgang]

I have no experience with them. Can't say much other than opinion based stuff. For $300 they seem kinda plain. :/ it's definitely got the materials though. With the smooth titanium slabs traction seems scarce.

[Hippi3Slay3r]

Picked this up at Wal-Mart on clearance for $19 :D

http://i101.photobucket.com/albums/m50/Cindel_bucket/sgsgsssssss.jpg

Sweet little knife so far im digging it :tu

[ktblunden]

My daily carry is a Spyderco Police with combo edge. I love the big thumb loop, makes one-handed opening a breeze. Unfortunately I caught it on something a couple weeks ago and ripped the clip off of it and haven't gotten around to ordering a replacement clip.

[MrClean]

Picked this up at Wal-Mart on clearance for $19 :D

Sweet little knife so far im digging it :tu

I like the Kershaw knives, especially for the price. I have 2 and they have both been great knives.

[Bill86]

Heard great things about them from some military friends of mine but what do you guys think?
Posted via Mobile Device

:sl :sl :sl

I told you what I thought already. $300 waste of money.

http://graymanknives.com/satu.html

This one is slightly better.....

But again, get a damn Strider for like $50-$75 more.

I agree with Wolfman, it's plain and all smooth. I don't see it being used for what it's intended to.

That pivot is weaksauce too. Especially for a knife of that cost. It's supposed to be built like a tank, but instead it fails and will develop blade play if put to any hard use task.

They also look entirely too blocky....I can't imagine that being comfortable.

In the future if they work out a few things I could see them being able to carry a $300 price tag, but not right now.....not when Striders are $50-$75 more and a XM-18 is $100 more.

[Devanmc]

:sl :sl :sl

I told you what I thought already. $300 waste of money.

http://graymanknives.com/satu.html

This one is slightly better.....

But again, get a damn Strider for like $50-$75 more.

I agree with Wolfman, it's plain and all smooth. I don't see it being used for what it's intended to.

That pivot is weaksauce too. Especially for a knife of that cost. It's supposed to be built like a tank, but instead it fails and will develop blade play if put to any hard use task.

They also look entirely too blocky....I can't imagine that being comfortable.

In the future if they work out a few things I could see them being able to carry a $300 price tag, but not right now.....not when Striders are $50-$75 more and a XM-18 is $100 more.

from what i can find a new strider is 100 more and i cant even find a new xm-18, but used ones are like 600+. If we are going to compare prices its new to new. i dont want someones used knife.

and pivot pin aside, a xm-18 and strider is illegal by length in michigan. I also dont carry a knife for a fashion item. so it being smooth and blocky means nothing to me.

The strider is nice though, the xm-18 is a resounding hell no. I might want to spend some money on a knife but i havent lost my mind.

[colinb913]

Just picked up a Kershaw Needs Work.. Sweet little knife. I noticed myself leaning way towards something with a assisted open, even after toying with a few others that weren't assisted open. I guess I just like having it, having that nice snap at the end of opening. Any ways, I saw these at Gander mountain for $45, but ultimately settled for the one at Wal-Mart for a mere $34 plus tax. Not a bad pick up. Can't wait to put it to work over the weekend.

If you click here, you can see the knife!! (http://www.kershawknives.com/productdetails.php?id=385&brand=kershaw)

[hammondc]

Just a Gerber Paraframe for me. ~3 years old now..

http://images.knifecenter.com/knifecenter/gerber/images/gb8447.jpg

[TripleF]

Just reviewed this Canal Street Cutlery Sunset Smooth Bone Trapper in my blog!!

http://i212.photobucket.com/albums/cc32/fishforfree2/CanalStreetCutlerySmoothSunsetBoneTrapperknife034. jpg

[spectrrr]

Hi, my name is Francis, and I'm an addict.

Fortunately my addiction has been tempered by both a lack of funds to pursue it, a preference for things that go bang, and some VERY picky requirements for an EDC knife.

First, my strongly held dislikes:
1) I don't like liner lock knives of any kind. They just don't feel good to me.
2) I don't like any of the auto/assisted opening knives I've tried (SOG, benchmade, S&W). I just don't feel "in control" when using it. It also makes for a longer closing motion.
3) I LOVE AXIS lock / ARC Lock / whatever special TM name a particular manufacturer wants to call it, I love it dearly and would be hard pressed to find something that words better for my hands and use.

Side note about the AXIS style locks - I generally feel like I can open it just as fast as an auto, and close it as fast as it opened. Just pull back on the lock to release all tension on the blade while simultaneously imparting just a tiny bit of momentum with your wrist and it's open (don't forget to release the lock button just as quickly as you pressed it so the blade stays open). Same exact motion in reverse to close. Most people that see it in action are convinced it's an auto knife, and some ask if it's legal :r

I know that list is pretty restrictive, but I've learned what I like over the years :)

So what do I carry? Couple things. Been a benchmade fan for a number of years, ever since an ex-gf, under the wise guidance of my best friend, gave me a full size Griptillian 550SBK for my birthday many years ago. I managed to hang onto it for many years, but eventually lost it.

At one point when a friend saw my Griptillian, he liked it and got himself a mini-griptillian. I really like the fit of the mini. The blade was almost as big, every bit as functional, but the handle seemed like it was 50% smaller and less bulky. Sheeple don't recoil from it as much. So when I eventually lost my full size one, I ran out and got a Mini-Griptillian 556SBK. She's well used after 3 years of daily carry, but I'll get another just like it tomorrow if I lose it. (although I've debated getting the 557SBK tanto blade). As an added bonus, the blade clocks in just under 3" and avoids any legal trouble. Takes a very sharp edge and holds it for a while (but not as long as I would like).

My second daily carry knife is a small fixed, weak side backup / utility / pry bar. (photos below). Local knife maker, don't remember their name. 90% of the time I carry it in a kydex sheath at the small of my back, weak side draw. So comfortable I can't feel it, even if I'm laying down. I also have a second kydex sheath tied into an imitation mercharness for the occasional days when belt carry is not an option. Fixed blades are much easier to clean, so this is what I use to cut up food or other messy tasks that I would rather not get inside my folder. This is also the knife I hand to other people, because I don't care if they're careless with it. It's thick and built like a TANK, bu my only complaint is that the grind doesn't take a good enough edge, its never really "sharp". But its sturdy and maintains its medium edge damned near indefinitely without sharpening.

I also own a SOG Mini-Vulcan which I love, it feels amazing in your hand and opens like butter, but I found that I could not carry it effectively. It features a deep concealment pocket clip that hides more of the knife in your pocket.... but that feature also meant when I gripped the top part to pull it out QUICKLY, I wasn't getting my fingers chocked up close enough to the center of the knife. I was pulling it out by the top edge, and in a rapid deployment, the blade coming out added to that imbalance and jeopardized my grip on it. Once it was out however, it melts into your hand like it was made for it!

Fixed blades have become a fascination and the "want" list is way too high. Some day I would love to own a Busse, although I suspect that INFI steel, while very good, is part hype.

[spectrrr]

http://i.imgur.com/Czyn5l.jpg
used, abused and loved!



http://i.imgur.com/KXPeLl.jpg
I have relatively small hands, so the mini-griptillian fits perfectly.



http://i.imgur.com/MYaCOl.jpg
shown next to the fixed blade utility /backup for size comparison.

[spectrrr]

http://i.imgur.com/EwLYDl.jpg
Belt sheath - I reversed the belt clip so that it would ride higher.



http://i.imgur.com/QHx15l.jpg
Sits at the small of my back, sheath slips behind the belt, doesn't print at all under clothing. I'm not a big guy, so anything bigger starts showing up under the clothing.



http://i.imgur.com/GTCgyl.jpg
Hollowed out some paracord and made a mercharness style shoulder harness. very small and thin.

[spectrrr]

On a side note, if anyone is looking for a decent quality but inexpensive fixed blade knife to keep in the car, one of these might do the trick. they both seems to be discontinued and on sale. I don't own either... but they both seem decent.

CRKT Crawford Kasper Dragon Combat Knife 4.5
http://www2.knifecenter.com/item/CR2010KN/ black
http://www2.knifecenter.com/item/CR2010/ satin

Ka-bar Peter Janda Fin Drop Point Tactical Knife
http://www.amazon.com/Peter-Janda-Fixed-Tactical-Serrated/dp/B001H8QZL2/ref=wl_it_dp_o_npd?ie=UTF8&coliid=IKHKSPFCVFZSP&colid=3GFRZP1FUBBJC

[Devanmc]

ok it wont fit in my pocket but it means business and goes along my back attached to my belt.

http://i94.photobucket.com/albums/l89/devanmc436/2011-11-25_17-25-51_252.jpg
http://i94.photobucket.com/albums/l89/devanmc436/2011-11-25_17-25-02_805.jpg
http://i94.photobucket.com/albums/l89/devanmc436/2011-11-25_17-24-34_319.jpg
http://i94.photobucket.com/albums/l89/devanmc436/2011-11-25_17-25-02_805.jpg
http://i94.photobucket.com/albums/l89/devanmc436/2011-11-25_17-24-23_300.jpg

as you can see even got my name and last 4 engraved into it for free.

[TripleF]

My knewest acquisition......Canal Street Cutlery American Chestnut Half Moon Trapper:



http://i212.photobucket.com/albums/cc32/fishforfree2/CanalStreetCutleryHalfMoonTrapperknife003.jpg

[ninjavanish]

So... I know these aren't pocket knives... but I stumbled across this website and can I just say... all you blade heads... prepare for salivation... yes, salivation... not salvation. salivation... check out the goods.

http://zombietools.net (http://zombietools.net)

Anyone ever ordered one of these?

I want The Deuce so bad I would almost spend the money to get it.

[SvilleKid]

Interesting site, ninja. I like that the Duece has a little thicker steel than most of the ones before it. Not that .204 inch isn't sufficient. But .25 has a better sound to it for the heavy work of zombie control!

[Bill86]

They do look cool, haven't heard anything about them though. I think I'd have to do some research and see how they compare, or don't, to Busse, Swamp Rat, ESEE etc before ordering one.

[spectrrr]

So... I know these aren't pocket knives... but I stumbled across this website and can I just say... all you blade heads... prepare for salivation... yes, salivation... not salvation. salivation... check out the goods.

http://zombietools.net (http://zombietools.net)

Anyone ever ordered one of these?

I want The Deuce so bad I would almost spend the money to get it.

You can't tell me this guy doesn't look just a little creepy, psycho, and maybe 1/4 of the way towards zombieville already? (http://zombietools.net/images/weapons/phalanx-max-1200.jpg)

--------------------------------------------------

Busse can be a little pricey.... BUT what you get is definitely top top grade steel.

zombietools makes some cool looking stuff... and I'm guessing its pretty damned durable too. But I think you're definitely paying a little more for the fancy looks and marketing that goes along with it at the cost of quality. For the same price, another maker could probably produce a blade with more fineness and a grade or two up in steel quality. :2

That deuce looks damned cool. I'm sure it would do the job wonderfully and look kickass mounted somewhere.

I do tend to favor something a little more maneuverable however. Hallways, quick stabs, but long enough to get a little reach and gain a little momentum in open air swinging. Likewise balanced right as to allow for very quick and precise cuts, as opposed to the brutally effective (IF it hits) cleaving of the deuce.

--------------------------------------------------

Sadly, all of the following knives are obtainable... for a price, and were much cheaper if purchased first hand from the manufacturer at the time of production and availability. :)

For the same general money I would probably buy the Scrapyard Scrapizashi $320 .... (http://i80.photobucket.com/albums/j176/jerrybusse/ScrapizashiBlack2.jpg) not so pretty, but more finesse than the duece. I saw a great youtube video of the thing being bent 180 degrees - didn't break, and returned about 90% to form. That's quality that I don't think the zombietools would be able to match.

If it was at all affordable, I would gladly jump up to the Swamp Rat Rodent Waki $550 (http://www.swampratknifeworks.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=10;t=006703) .... there's videos on youtube of this thing chopping down trees and then being shaving sharp. http://www.youtube.com/watch?v=zRnVY9qLCEE&feature=related


And of course you double that to get INFI steel, but I think the Waki hit's the sweet spot.
Busse AK47 $1150 (http://farm6.static.flickr.com/5046/5320919577_579b03aa22.jpg)
And frankly, if I was spending that much, I would get a Busse Gladius (see below)

--------------------------------------------------

Now, if money were no object, this is what I would get. Hands down, the end all be all sword for me! It's a thing of beauty!
http://i74.photobucket.com/albums/i275/xander_jax/Gladius_Sage-CoyoteBrown1.jpg
http://www.bladeforums.com/forums/showthread.php/746140-Busse-Combat-Gladius.-.-.-.-.-.-%28Sneak-Peek%29
http://www.ebay.com/itm/BUSSE-COMBAT-KNIFE-GLADIUS-CUSTOM-KYDEX-SHEATH-/250909207118?pt=Collectible_Knives&hash=item3a6b5aaa4e
http://img22.imageshack.us/img22/3740/gladiusv.jpg
Had I that kind of disposable income and I ever saw it for sale at that price, it wouldn't even be a question :)
The Satin finish would be my prefered finish. not as tactical as black, but its just too damned pretty on that gladius!
I'm not a big guy & I've got small hands, so I could wield the gladius two-handed with great finesse or brutal chopping, while maintaining the ability to use it one handed in a pinch.

--------------------------------------------------

Finally, I don't think I've ever seen a bigger single group of blade p r * n in one set of photos than right here. Yes, I realize he's a dealer, but still this guys set of blades is incredible.
http://www.jerzeedevil.com/forums/showthread.php/76559-Liu-Kang-s-Busse-Microtechs-Benchmade-Strider-Emerson-Customs-etc...

[LostAbbott]

This thread had been far too quiet for too long... Any one pick anything nice up?

I recently bit the bullet on this beauty... Best folder I have ever held...

http://i.imgur.com/x1Cl2.jpg

http://i.imgur.com/b1LrM.jpg

http://i.imgur.com/qAg0O.jpg

Anyone that is waffling one a CRK knife, stop now and go get one, it will be the best knife purchase of your life.

[crazyirishman]

I carry a small, black Bushnell folder clipped to my belt on a daily basis (until I get my CCW, at which point my belt will carry something with a little more oomph. But I'll probably still carry the knife).

Not sure of the model but the construction is very solid and it hasn't failed me in opening or cutting yet. Just a little pressure on the thumb stud toward the wrist and it pops right open. Perfect for slicing a box at work or turning a stick into a toothpick during warm, outdoor stogie sessions.

[Bill86]

Which CRK is that Mychal? I've heard good things. I went Strider, I like the Hinderer XM-18's as well. Someday I'll bite the bullet. It would be a dream to have all three (Strider SMF/Large Sebenza/XM-18 or 24)

Looks great though :tu

[LostAbbott]

Which CRK is that Mychal? I've heard good things. I went Strider, I like the Hinderer XM-18's as well. Someday I'll bite the bullet. It would be a dream to have all three (Strider SMF/Large Sebenza/XM-18 or 24)

Looks great though :tu

Bill it is a left handed Umnumzaan. Slightly bigger than the sebby and heftier. Hinderer knives are amazing, but that is double the price of this and I could not see how it was better.
Posted via Mobile Device

[Bill86]

Bill it is a left handed Umnumzaan. Slightly bigger than the sebby and heftier. Hinderer knives are amazing, but that is double the price of this and I could not see how it was better.
Posted via Mobile Device

Yeah they are definitely not easy to score for any decent price. If you are lottery odds lucky you'll pay $400.

I knew something was different, lefty that was it. Bigger and heftier then the Sebenza? Nice! I always worried that the Sebenza wouldn't handle the abUSE I give it.

I think you picked a winner :tu :tu

[Bageland2000]

http://www.shamusyoung.com/twentysidedtale/images/swiss_army_knife.jpg
It's kind of a big deal

[LostAbbott]

Yeah they are definitely not easy to score for any decent price. If you are lottery odds lucky you'll pay $400.

I knew something was different, lefty that was it. Bigger and heftier then the Sebenza? Nice! I always worried that the Sebenza wouldn't handle the abUSE I give it.

I think you picked a winner :tu :tu

Thanks I am pretty excited about it. A Guy on bladeforums did a long term in-depth review and did everything from cutting fruit to digging in the dirt, light sheet metal cutting and the knife held up like brand new. I have literally never seen or held a better knife, right from the moment I opened the box.
Posted via Mobile Device

[Angry_Pirate]

Picked up this Benchmade 950BK Osborne Rift. My first Benchmade I really like the Axis lock!!
http://www.cigarasylum.com/vb/picture.php?albumid=799&pictureid=6791

[TripleF]

Just had to share this with you all.

Great Eastern Cutlery Tidioute Jigged Brazilian Cherry Wood Lockback

http://i212.photobucket.com/albums/cc32/fishforfree2/GreatEasternCutleryTidiouteBeaver721112knifereview 1.jpg

I just reviewed it in my blog and it scored 9.9 Steel Sahlutes!

[Jasonw560]

Saw a CRKT even one of my 9 year old twins thought was beautiful. May have to pull the trigger on it next month.

[tenbaseg]

Anyone have any recommendations for a small EDC for days that I can't go with my SOG Flash II? I looked at the Flash I and the Spyderco dragonfly but I'm not in love with either.

[Bill86]

Anyone have any recommendations for a small EDC for days that I can't go with my SOG Flash II? I looked at the Flash I and the Spyderco dragonfly but I'm not in love with either.

What blade length, and what price? Heavy duty knife or just a light use?

[LostAbbott]

Anyone have any recommendations for a small EDC for days that I can't go with my SOG Flash II? I looked at the Flash I and the Spyderco dragonfly but I'm not in love with either.

My small lightweight carry is a kershaw skyline. It is a fantastic knife and at $30 on Amazon it is my go to travel knife. The price makes me not worried to lose it.
Posted via Mobile Device

[smitty81]

my EDC.
http://smartgiftidea.com/images/leatherman/skeletoolcx/skeletoocxl-diagram.jpg

[spectrrr]

Anyone have any recommendations for a small EDC for days that I can't go with my SOG Flash II? I looked at the Flash I and the Spyderco dragonfly but I'm not in love with either.

clarification - what are the limiting factors that prevent you from carrying the Flash II on those days, and what specifications must its substitute hold in order to avoid those same complications?

I really like a Benchmade Mini-Griptillian 556SBK for my EDC. draws and opens fast and clean. No auto, but I'll bet you can get it open almost as fast as an auto, and close it 20x faster. You can read my full review in this thread back a couple dozen posts. She's not the prettiest girl at the dance, but I like her ;)

[tenbaseg]

What blade length, and what price? Heavy duty knife or just a light use?

I'm thinking about 2.5" for light use.

[tenbaseg]

clarification - what are the limiting factors that prevent you from carrying the Flash II on those days, and what specifications must its substitute hold in order to avoid those same complications?

Really it's just the size. I'm either wearing khakis for work or just don't want to carry something as big. Function-wise, the only thing I don't like are liner locks. I just can't get used to them. No combo blades either.

[Bill86]

I'm thinking about 2.5" for light use.

I'd grab any Benchmade in D2 Tool Steel. The blades tend to hold up for quite a long time and Benchmade has a great warranty.

Shame they discontinued the Benchmade Mini-Nitrous Stryker as that would have been a perfect knife for you. It was available in many configurations too. PE Satin spear point or tanto.....

[spectrrr]

Really it's just the size. I'm either wearing khakis for work or just don't want to carry something as big. Function-wise, the only thing I don't like are liner locks. I just can't get used to them. No combo blades either.

AMEN! I can't stand em either.

Which is unfortunate, because there's a lot more "slim" liner lock options available!!

[spectrrr]

Color wise, are you looking for something that doesnt have a black handle?

not sure, maybe that would look better with kakis?
http://www.benchmade.com/images/products/product_lgshot/pd1558.jpg

BIG drawback to the benchmade for your purpose is that unlike the SOG which sits flush with the pocket line, the benchmade pokes out just a tad. I PREFER this for easy draw. I've got a SOG Vulcan (sits flush) which I really like... but never ended up carrying because it always felt unbalanced when drawing it out - hand was only gripping the very end of it. BUT for purposes of work and kakis..... flush has its advantages :)

(you can see what I'm talking about if you look at the clip in the pic below - screws ot the end all sit above the pocket line)
http://i.imgur.com/Czyn5l.jpg

[Bill86]

SoG does use that low rider pocket clip that keeps 100% of the knife in your pocket. I just don't like the cheap steel and cheap handles. They seem very unbalanced to me due to the Zytel handles.

I don't mind having some of the knife stick out, and sometimes you can be quite surprised at how these larger heavier knives carry.

I don't know if your oppose to it but for light carry I usually have a Microtech Ultratech. Very slim and very light but of course it is an automatic out the front knife. I've carried it for 2 years and haven't had a problem yet. Get an old model '00-'05 and they are built very well, some of the newer ones....not so much :td

[spectrrr]

Just took a gander at my amazon wishlist where I stuffed a bunch of knives that "looked nice for me but I would probably never get around to buying".

Saw this one, looks like it might be to your specifications. light. axis lock. plain edge. comes in black or silver. http://sogknives.com/store/accesscard2_SOGAC76.html

[tenbaseg]

Thanks for the suggestions. Now I just have to drop some birthday wishes around the house.

[Wolfgang]

I don't know if your oppose to it but for light carry I usually have a Microtech Ultratech. Very slim and very light but of course it is an automatic out the front knife. I've carried it for 2 years and haven't had a problem yet. Get an old model '00-'05 and they are built very well, some of the newer ones....not so much :td

I carry mine everyday too. Everyone bags on their current quality. Rather than hunting down an older model with inflated prices because rumors caught hold get a readily available current production one.

Bill, What exactly do you see different between the current production ultra-tech and the older models 00-05?

http://www.bladehq.com/cat--Ultratech-OTF-Series--268

[Bill86]

I carry mine everyday too. Everyone bags on their current quality. Rather than hunting down an older model with inflated prices because rumors caught hold get a readily available current production one.

Bill, What exactly do you see different between the current production ultra-tech and the older models 00-05?

http://www.bladehq.com/cat--Ultratech-OTF-Series--268

It might just be the Blade Show 2010 or 2011 models but mine broke 3 times and is still broken. Sent it in twice, it just doesn't work.

My 2006 model works perfectly and has never failed to fire.

I heard people were having problems with the newer Halos too regarding the internals breaking and sending it in with minimal luck.

The word was current production Microtechs quality has gone down quite a bit and we all know about their non-existent customer service.

[LostAbbott]

Sorry wolfgang but I am with bill here. I bought a 2011 ultratech and within two weeks of owning it two if the screws fell out. On top of that the screws are a priority bit and you can only source screws from microtech. If I waited to get new screws it would have taken two months without and gurentee of them falling out again or not. I also had a friend buy an ludt, and within two months it was extremely loose when locked up and had gotten very dull from extremely light use. I personally handled this knife many times and was amazed at the poor build quality compared to my early 2000's microtechs.

IMHO new microtech are poorly made with lower quality tempering of the steel they are using. It is really dissapointing to me as there were my favorite knife maker.
Posted via Mobile Device

[Wolfgang]

Guess im just a lucky one and got a decent batch (several times..)? :sh

No arguments on their customer support. :td

[LostAbbott]

Send me one of those. I love the design of the ultratech just cannot trust them anymore.
Posted via Mobile Device

[Bill86]

Guess im just a lucky one and got a decent batch (several times..)? :sh

No arguments on their customer support. :td

You got me. All I know is my 2010 Blade Show Ultratech sits broken in a drawer and I highly doubt it will ever get fixed. I've even tried people in the knife making/fixing business, it works for a few days and boom broken again.

[LostAbbott]

You got me. All I know is my 2010 Blade Show Ultratech sits broken in a drawer and I highly doubt it will ever get fixed. I've even tried people in the knife making/fixing business, it works for a few days and boom broken again.

You can work something out with blade HQ. Send it to them or microtech and the it come back through blade HQ. They may charge you a little for handling but should help you get your knife fixed...
Posted via Mobile Device

[Wolfgang]

I get all my knives through BladeHQ. Love their customer support.

[Bill86]

You can work something out with blade HQ. Send it to them or microtech and the it come back through blade HQ. They may charge you a little for handling but should help you get your knife fixed...
Posted via Mobile Device

Done that already, it broke again after a few days use. Perhaps I could talk to them again about it.

[issues]

Here's a picture of my newest baby. :tu

http://img.photobucket.com/albums/v45/issues1975/Dscn02481.jpg

[Powers]

I'm still a knife noob but my everyday carry is a SOG Trident in all black. It's a great tactical knife and also awesome for fishing. With its 3.75" half serrated blade and assisted opening, I also like to think its intimidating if they situation every called for it :tu

[hammondc]

I want a Gerber Mini Covert Folder. I really like the Applegate Fairbain combat folder with the olive handle, but credentials are required. I'll check the gun show this weekend.

[Bill86]

Looks like a Benchmade Tony, what model is it?

I'm still a knife noob but my everyday carry is a SOG Trident in all black. It's a great tactical knife and also awesome for fishing. With its 3.75" half serrated blade and assisted opening, I also like to think its intimidating if they situation every called for it :tu

I carried a Trident for probably a year. As long as you're not beating on it, it's a good knife. Very light weight too, I use to forget I was carrying it....sometimes I wasn't :r

[MurphysLaw]

Looks like a Benchmade Tony, what model is it?


Looks like the Kershaw Rake :tu

http://www.kershawknives.com/productdetails.php?id=528&brand=kershaw

[Bill86]

Looks like the Kershaw Rake :tu

http://www.kershawknives.com/productdetails.php?id=528&brand=kershaw

Ah I should have looked at the CPM-D2, Benchmade doesn't really use that stuff, just regular D2.

Not too familiar with Kershaws either, except the ZT's.

[spectrrr]

I want a Gerber Mini Covert Folder. I really like the Applegate Fairbain combat folder with the olive handle, but credentials are required. I'll check the gun show this weekend.

Doesnt seem like Amazon requires any credentials?
http://www.amazon.com/Gerber-30-000363-Applegate-Fairbairn-Anniversary-Limited/dp/B00439GT68/ref=sr_1_2?s=hi&ie=UTF8&qid=1337136376&sr=1-2

[issues]

Looks like the Kershaw Rake :tu

http://www.kershawknives.com/productdetails.php?id=528&brand=kershaw

You got it! :tu

[Zeuceone]

picked up a mini ak47 recently but havent had a chance to use it.

[issues]

Here are a couple of new pics to keep the thread alive. :tu

DPx HEST 2.0 LH
http://img.photobucket.com/albums/v45/issues1975/Dscn0387-1.jpg

Zero Tolerance ZT0350CP
http://img.photobucket.com/albums/v45/issues1975/DSCN0374-1.jpg

At my wedding, groomsmen gifts. Kershaw Baby Boas
http://img.photobucket.com/albums/v45/issues1975/knifeparty.jpg

[Powers]

They look sweet, Tony :tu

[issues]

Thanks Mike!

[hammondc]

Doesnt seem like Amazon requires any credentials?
http://www.amazon.com/Gerber-30-000363-Applegate-Fairbairn-Anniversary-Limited/dp/B00439GT68/ref=sr_1_2?s=hi&ie=UTF8&qid=1337136376&sr=1-2

Thanks. I saw that one but it is a bit different. Mainly, it is way more spendy and the handle is a different material (wood vs glass nylon). Seeing that I live in Military City, USA, I have some feelers out for the one one I am looking for. (http://www.gerbergear.com/Tactical/Knives/Applegate-Combat-Folder_22-01608)

[hammondc]

Tony- those baby boas are pretty rad. That may have to go on my list.

[spectrrr]

Thanks. I saw that one but it is a bit different. Mainly, it is way more spendy and the handle is a different material (wood vs glass nylon). Seeing that I live in Military City, USA, I have some feelers out for the one one I am looking for. (http://www.gerbergear.com/Tactical/Knives/Applegate-Combat-Folder_22-01608)

ahah :) I see it now. Shouldn't be hard to find. Had the same problem in MA for purchasing just about anything "dangerous", but it was never hard to get around.

[emopunker2004]

Well in a week and a half I'm gonna order up a new knife. Looking for a sub $250 knife. Any recommendations?

[spectrrr]

fixed or folder?

[emopunker2004]

fixed or folder?

Folder :tu

[spectrrr]

mmm, no suggestions there, I'm not up on $100+ folders :)

[emopunker2004]

mmm, no suggestions there, I'm not up on $100+ folders :)

Autos are also allowed. I'm looking at the ZT301, ZT350 and some autos right now

[LostAbbott]

Take a look at protech, their tr3 and 4 are both amazing knives very well made and 100% us produced, which is why they use CM154 instead of the newer stuff, I however happen to love 154 as I find it a lot easier to sharpen... yeah. Get a protech.....
Posted via Mobile Device

[spectrrr]

+1 on the 154CM -- my EDC Benchmade has it and I like it. Holds a decent edge, and sharpens easily without spending 20 min at the stone. A few deft strokes on a fine grit stone or a ceramic honing rod every once in a while will keep her like a razor.

[spectrrr]

Well, this isn't exactly a "pocket" knife, but it seems this thread does double duty as the only "blade" related thread here, so I figured I'd share my new acquisition. (and they make pocket knives too ;))

I generally consider Shun Classics to be great knives, but a little overpriced, something of equal quality with perhaps less aesthetics can usually be had for less. But when I saw this one for 45% off... well I couldn't resist :)

(I know the pics are a little cheesy, I was doing something else with the camera and just tossed the blade and a block in there on a whim!)

http://i.imgur.com/tNZcg.jpg (http://imgur.com/fzbTC.jpg)



http://i.imgur.com/9Ibt2.jpg (http://imgur.com/sV8gq.jpg)

[issues]

Autos are also allowed. I'm looking at the ZT301, ZT350 and some autos right now

ZT350 can be had for a good amount under $200 (usually around $140). The ZT composite I have can be had for just under 200 and the stonewash on the blade makes it really hard to see any scratches or blemishes. It is a beautiful piece and opens quite quickly with the AO.

The only negative on it is the left-handed thumbstud. It is near impossible to get to and the jimping can bite you when using the flipper although neither issue is too bad...

As for autos, I haven't played with any as I cannot carry them so I can't help you there. :tu

[area51]

Just picked this guy up.
http://ecx.images-amazon.com/images/I/31NXOswx0hL._SL500_AA300_.jpg

[Powers]

I've got Bear's Parang and love it, especially for the price. I don't personally like the color design but that's low on my list of priorities in a practical machete lol

[area51]

When I say just picked it up, I mean I've had if for about two months now...anyway, I was put off by the color as well but for the $24 price tag I wasn't that put off. I took it to California for NTC (National Training Center (for pre deployment training)) and it survived some of the harshest conditions I will probably have to put it through.

[Powers]

Cool bro, good to know :tu

[emopunker2004]

This knife makes me :dr
It's a Hogue EX01. I've seen good reviews of it on BF

http://i272.photobucket.com/albums/jj182/TheMystro1971/KNIVES/EX01.jpg

[issues]

It is a beautiful knife Justin although I can't say I'm a fan of the scales.

I have seen the tanto version pimped, carbon fiber scales with the lock removed and it looks amazing!!!

http://www.youtube.com/watch?v=9WvkZhg4TxY&list=UUtolrgEBplG2cOibU4J_gVg&index=5&feature=plcp

Skip to 13:10 to see the Hogue EX01. :tu

[emopunker2004]

i love the stock g-10 scales. i think the black/grey ones might be better though.

[emopunker2004]

Well I picked up a new knife....

http://farm8.staticflickr.com/7237/7355855696_a484f5a3dd_c.jpg (http://www.flickr.com/photos/thestemens16/7355855696/)
DSC_3803 (http://www.flickr.com/photos/thestemens16/7355855696/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

http://farm8.staticflickr.com/7084/7170634211_59d6969f1d_c.jpg (http://www.flickr.com/photos/thestemens16/7170634211/)
DSC_3806 (http://www.flickr.com/photos/thestemens16/7170634211/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

[kickerb]

damn, that thing is crazy cool.

[LockOut]

What is it. I like the looks of that thing. Good lock up on it?

[emopunker2004]

damn, that thing is crazy cool.
Yes it is, but cool comes with a price tag :r

What is it. I like the looks of that thing. Good lock up on it?

It's a Microtech Combat Troodon. The lock up is good, only very minor blade play which is almost required in an OTF knife.

[emopunker2004]

http://farm9.staticflickr.com/8164/7358310372_4376c71e8f_c.jpg (http://www.flickr.com/photos/thestemens16/7358310372/)
DSC_3809 (http://www.flickr.com/photos/thestemens16/7358310372/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

http://farm8.staticflickr.com/7234/7173084625_e08651d0d1_c.jpg (http://www.flickr.com/photos/thestemens16/7173084625/)
DSC_3810 (http://www.flickr.com/photos/thestemens16/7173084625/) by thestemens16 (http://www.flickr.com/people/thestemens16/), on Flickr

[Wolfgang]

I approve! If you end up not liking it ill buy it.

[longknocker]

Yes it is, but cool comes with a price tag :r



It's a Microtech Combat Troodon. The lock up is good, only very minor blade play which is almost required in an OTF knife.

Tried The GLASS BREAKER, YET? BEAUTIFUL KNIFE!:tu

[Wolfgang]

Glass breaker? Thats a Skull Crusher. :D

[hammondc]

Yes it is, but cool comes with a price tag :r



It's a Microtech Combat Troodon. The lock up is good, only very minor blade play which is almost required in an OTF knife.

That knife is SICK! Are OTF knives even legal for carry?

[hammondc]

OH JEEZUS!!!! I just saw the price tech. My eyes hurt a little.

:D .... :eek: .... :O ........ :sad

[emopunker2004]

Tried The GLASS BREAKER, YET? BEAUTIFUL KNIFE!:tu
Not yet and thanks

Glass breaker? Thats a Skull Crusher. :D
Same thing right?

That knife is SICK! Are OTF knives even legal for carry?
They are in FL. It varies by state. In FL if you have a CCW permit you can carry one.
OH JEEZUS!!!! I just saw the price tech. My eyes hurt a little.

:eek: .... :O ........ :sad

lol

[issues]

Nice choice Justin!!! :tu

[Jasonw560]

That knife is SICK! Are OTF knives even legal for carry?

We can't. Our draconian state laws classify these are "switchblade" type knives. Of course, no one would care outside of Hippieville (Austin).

[emopunker2004]

Nice choice Justin!!! :tu
Thanks man. I'm loving it buy boy do you gotta pay to play :r
We can't. Our draconian state laws classify these are "switchblade" type knives. Of course, no one would care outside of Hippieville (Austin).
That sux. "switchblades" are legal here to have and you can carry them with a CCW permit.

[WittyUserName]

Thanks man. I'm loving it buy boy do you gotta pay to play :r

That sux. "switchblades" are legal here to have and you can carry them with a CCW permit.

I believe VA is the same way, you just need to be military or LE to purchase.

[emopunker2004]

I believe VA is the same way, you just need to be military or LE to purchase.

Hm. anyone here can purchase in person. Just seems like many sites make you be leo/mil to purchase due to shipping.

[WittyUserName]

Hm. anyone here can purchase in person. Just seems like many sites make you be leo/mil to purchase due to shipping.

I will look into that when I get back for good.

[Wolfgang]

Anyone anywhere can order from bladehq dot com for a "personal collection" its up to you to know the carry limitations.

[emopunker2004]

Well Tony I finally nutted up and got a gold membership over on BF

[emopunker2004]

...As for autos, I haven't played with any as I cannot carry them so I can't help you there. :tu

Hey Tony. Why can't you carry autos?

[WittyUserName]

Well after browsing here I decided to get the ZT G-10

http://i1048.photobucket.com/albums/s367/siren_0/899949e4.jpg

Justin, what is BF?

[longknocker]

Well after browsing here I decided to get the ZT G-10

http://i1048.photobucket.com/albums/s367/siren_0/899949e4.jpg

Justin, what is BF?

I Think It's "Blade Forum", Adam.:tu

[emopunker2004]

Nice zt 0350 Adam. Bf is bladeforums.com

[WittyUserName]

I Think It's "Blade Forum", Adam.:tu

Nice zt 0350 Adam. Bf is bladeforums.com

I am staying far far away from that forum!!

[emopunker2004]

I am staying far far away from that forum!!

:td
You should come on over bro.

[Wolfgang]

Im there too. :D Ive been fairly good lately though.

It may be time to retire the ludt and pick a new work knife.

[emopunker2004]

Im there too. :D Ive been fairly good lately though.

It may be time to retire the ludt and pick a new work knife.

you there under Wolfgang too?

[issues]

Hey Tony. Why can't you carry autos?

Don't have a CCW permit, at least, not yet. :tu

Lovin' the ZT350 Adam, I have one very similar just with the composite, stone washed blade!

[emopunker2004]

Don't have a CCW permit, at least, not yet. :tu

Lovin' the ZT350 Adam, I have one very similar just with the composite, stone washed blade!

Well get one then! :r Easy as cake. You ever gonna buy a gold membership over on blade?

[emopunker2004]

what do you think of these?

http://i.ebayimg.com/t/LIONSTEEL-KNIFE-SR1-A-OB-ORANGE-ALUMINUM-HANDLE-BLACK-D2-BLADE-FOLDER-NIB-/00/s/NDgwWDY0MA==/$(KGrHqF,!rUE-lIbreGRBPvS2V5z(w~~60_3.JPG

http://i.ebayimg.com/t/LIONSTEEL-KNIFE-SR1-A-GB-GREEN-ALUMINUM-HANDLE-BLACK-D2-BLADE-FOLDER-NIB-/00/s/NDgwWDY0MA==/$(KGrHqF,!lME9lsNg(!YBPvS4Qrphw~~60_3.JPG

[longknocker]

what do you think of these?

http://i.ebayimg.com/t/LIONSTEEL-KNIFE-SR1-A-OB-ORANGE-ALUMINUM-HANDLE-BLACK-D2-BLADE-FOLDER-NIB-/00/s/NDgwWDY0MA==/$(KGrHqF,!rUE-lIbreGRBPvS2V5z(w~~60_3.JPG

http://i.ebayimg.com/t/LIONSTEEL-KNIFE-SR1-A-GB-GREEN-ALUMINUM-HANDLE-BLACK-D2-BLADE-FOLDER-NIB-/00/s/NDgwWDY0MA==/$(KGrHqF,!lME9lsNg(!YBPvS4Qrphw~~60_3.JPG

Never Heard Of That Brand, Myself.:confused:

[emopunker2004]

Never Heard Of That Brand, Myself.:confused:

Lionsteel. It's an Italian company. They also make the DPX Hest 2.0

Those knives I posted, the blade is D2 and the handle is a solid piece of AL milled out. It's a Framelock

[longknocker]

Lionsteel. It's an Italian company. They also make the DPX Hest 2.0

Those knives I posted, the blade is D2 and the handle is a solid piece of AL milled out. It's a Framelock

Good Steel Anyway. I Love My D2 Steel Microtech L-UDT!:)

[emopunker2004]

They make one that's Ti instead of AL but that's more $$$

[longknocker]

I Still Like The Last Knife You Bought Or Tony's Knife.
http://www.cigarasylum.com/vb/showpost.php?p=1637930&postcount=412

[longknocker]

How About The Custom Titanium Knife At The Upper Left?:D
http://www.bladehq.com/cat--Strider-SMF--806

[emopunker2004]

I can't even afford a regular SMF :r
Those Lionsteels go for like $170ish in AL

I like this one too
http://www.bladehq.com/item--Kershaw-Knockout-Assisted-Opening--8381

[longknocker]

I can't even afford a regular SMF :r
Those Lionsteels go for like $170ish in AL

I like this one too
http://www.bladehq.com/item--Kershaw-Knockout-Assisted-Opening--8381

Good Looking Knife!:tu What Do You Think About "Cold Steel" Knives?

[emopunker2004]

I have no experience with them, looking at them they're not really my style

[longknocker]

I have no experience with them, looking at them they're not really my style

I Have The Exact Knife Shown In This Video. "Bad Boy" But A Little Large For EDC!:r:D
http://www.youtube.com/watch?v=w-ctBimpelc

[emopunker2004]

:r overkill much?

[Wolfgang]

yeah im wolfgang everywhere lol

I like the lion steel stuff but they are way to heavy for me.

I think im going to pick up the ZT Talon for work Its the perfect shape for score and snapping acrylic.

http://images.knifecenter.com/knifecenter/zerotolerance/images/ZT0750.jpg

[emopunker2004]

i think i found you on BF but if it's you then you havent been on in a good while eh?

That's a nice one, not my style but it looks sweet.

[longknocker]

:r overkill much?

It Will Do The Job!:D

[emopunker2004]

get a Zero Tolerance 0300 Greg

[Wolfgang]

yeah im not on there too much.

[Jasonw560]

Good Looking Knife!:tu What Do You Think About "Cold Steel" Knives?

I have a Cold Steel Voyager (old style). LOVE it. It's usually clipped in my front pocket for EDC. My next choice is getting one of their SRK knives, for the zombie apocalypse...or hunting and outdoor stuff.

[emopunker2004]

Well I just ordered a Kershaw Blur blem model from kershawguy.com for $35 shipped

http://www.jsburlys.com/media/ecom/prodsm/kershaw1670BLK.jpg

[BHalbrooks]

I think im going to pick up the ZT Talon for work Its the perfect shape for score and snapping acrylic.

I've heard nothing but positive things about Zero Tolerance.
Well I just ordered a Kershaw Blur blem model from kershawguy.com for $35 shipped


I'm a big fan of that, and the Zing. The Zing is like sub $40, and it's worth it for sure.

In other news, ever since looking at this thread, I've been toying around with getting into knives again. I still have a couple. I've been in love with this.
http://i145.photobucket.com/albums/r232/22938/Untitled.jpg

[emopunker2004]

The only thing about that Benchmade customizer is that it makes the knife soooo expensive in comparison to buying one premade.

Still looking for another knife though. Thinking Spyderco Para2:

Black/Black
http://www.harrysarmysurplus.net/assets/images/spyderco/C81GPBK2.jpg

or

Black/Camo
http://www.handyniknaks.co.uk/ekmps/shops/handyniknaks/images/spyderco-knives-paramilitary-2-knife-c81gcmobk2-digi-camo-4927-p.jpg

[spectrrr]

I Have The Exact Knife Shown In This Video. "Bad Boy" But A Little Large For EDC!:r:D
http://www.youtube.com/watch?v=w-ctBimpelc

:r overkill much?

Nah, here's the coldsteel EDC you need :r
http://www.youtube.com/watch?v=gwimJteCPjI&t=1m45s

[longknocker]

Nah, here's the coldsteel EDC you need :r
http://www.youtube.com/watch?v=gwimJteCPjI&t=1m45s

:tu That's What You Need In Venezuela, Brother!:D

[BHalbrooks]

The only thing about that Benchmade customizer is that it makes the knife soooo expensive in comparison to buying one premade.

Still looking for another knife though. Thinking Spyderco Para2:

This is true. But I was tossing the idea about getting the USCG logo on the blade, because my Wife is in the CG. Not only would it look cool, but it'd also help my case on getting it. :noon

I've been looking around on SpyderCo, but their site drives me crazy.
Nah, here's the coldsteel EDC you need :r
http://www.youtube.com/watch?v=gwimJteCPjI&t=1m45s
I loathe Cold Steel.

[Bill86]

Nah, here's the coldsteel EDC you need :r
http://www.youtube.com/watch?v=gwimJteCPjI&t=1m45s

:lr

See the problem is...the knife has ZERO practical use. I think that video poster is HIGHLY mistaken if he thinks that is a good self defense knife. Flailing around a 17 OAL folder is not a good idea. I also consider it highly unconcealable and 1 pound for a knife is A LOT.

Also want to point out there aren't very many states with a ZERO limit for blade length, which is what you would need.

[Bill86]

I loathe Cold Steel.

Couldn't be the marketing could it ;)

I hear ya man, VERY gimmicky.

[BHalbrooks]

Couldn't be the marketing could it ;)

I hear ya man, VERY gimmicky.
They drive me crazy. Like that video I just watched, I thought it was a Cold Steel employee... They're all douchey in my opinion.

[emopunker2004]

This is true. But I was tossing the idea about getting the USCG logo on the blade, because my Wife is in the CG. Not only would it look cool, but it'd also help my case on getting it. :noon

I've been looking around on SpyderCo, but their site drives me crazy.

I loathe Cold Steel.

Check out BladeHQ and look at the spyderco knives on there, easier to navigate
http://www.bladehq.com/cat--Spyderco-Manual--155

[Bill86]

They use to send me catalogs all the time, dvds, of the annoying company owner doing a bunch of "tests" with his knives. None of them were very valid IMHO.

Also most of their knives use Aus-8 which is NOT a premium steel. Pretty much the very basic or intro steel, just like 440C.