For all you *stock* Glock owners...

Silound · 11-30-2011, 08:45 PM

*crickets*

Maybe I'm in the wrong place?

Anyway, question at hand is this: Has anyone ever worn out, chewed up, or otherwise damaged a recoil guide rod on a Glock pistol? The only reason I ask is that I seem to have chewed off the "nail head" on my guide rod...completely! The spring falls right off the end of the rod. I understand this is not unusual for an old spring and rod assembly, but this one has seen less than 3,000 rounds fired since the last spring change.

It worried me for a minute, but neither I nor my gunsmith can find anything it can catch on in that area, and it slides cleanly and quietly, so it boils down to just regular wear as best we can tell. His rod didn't show any signs of abuse after 24 rounds, so....

macsauce13 · 11-30-2011, 08:50 PM

Did you check the AC delternator-alternator? Thats what i'd do...

elderboy02 · 11-30-2011, 09:50 PM

I have never had problems with my G23 (.40 S&W). I would call Glock in Smyrna, GA and see what they have to say.

http://www.glock.com/english/index_contact.htm

Vic81 · 11-30-2011, 09:51 PM

I've had my 27 (40cal) for over 10 years and never had a problem with it. But if I did, I would take it to the factory which is just around the corner. Have you talked to anyone at Glock?

sikk50 · 12-01-2011, 01:03 AM

I have two glocks bc I know I can treat them like a $.02 whore and they'll still shoot straight everytime. You may have a deeper problem

longknocker · 12-01-2011, 03:13 AM

New Glock Owner, Here, With A 4th Gen. Model 22. No Problems After 500 Rounds. Like Others Said, Call Glock & GL. Keep Us Informed!

Silound · 12-02-2011, 08:05 AM

I called yesterday during lunch.

They confirmed that there is nothing in that area of the pistol that can damage that recoil rod except the recoil of the gun firing, and that chipping of the "nail head" was most commonly associated to heavy use wear, and part of why they recommend replacement every 2,000-5,000 rounds (depending on the model). Especially on larger calibers where the recoil trap is more violent. Did I mention this particular gun is a 2nd Gen 21?

Also, I asked about the after market rods (metal ones) while I was talking to the guy, and I was advised that the stainless aftermarket rods, while to spec, could possibly shorten the lifetime of the gun. Apparently the polymer rods are designed to flex and soften some of the recoil force on the working parts of the gun, whereas the metal rods don't do that. Is it BS? I don't know, but it seems plausible in theory though.

At any rate, they were very helpful about the deal, and even offered to tell me all the local authorized Glock dealers in my area who could order parts for me. New rods should arrive today in the mail, so I'll be right as rain by tomorrow.

elderboy02 · 12-02-2011, 08:16 AM

Very cool! I knew Glock would take care of you. They are a stand up company

replicant_argent · 12-02-2011, 08:16 AM

I had one lock up on my early second gen G17 (bought about 20 years ago) after about 3 or 4 thousand rounds. That was probably over 12 years ago. I happened to run by a local gun store with a Glock rep showing off new pistols at the time, he tossed me a new one for free and I haven't had a problem with a couple thousand more rounds down the pipe since. I can't speak for any newer gen versions or the aftermarket rods, but mine is pretty much bone stock except for the front sight. If the tool ain't broke...

edit: Many of the first few K rounds through mine were reloads, and a good percentage of them were fairly hot.

bonjing · 12-02-2011, 12:49 PM

We've broken a few, but it comes from normal wear and tear.

11-30-2011, 08:45 PM	#1
Silound ex-CS Swamp Gorilla Join Date: Nov 2008 Location: Somewhere in a swamp, south of sanity Posts: 802 Trading: (15)	*For all you stock* Glock owners...** crickets Maybe I'm in the wrong place? Anyway, question at hand is this: Has anyone ever worn out, chewed up, or otherwise damaged a recoil guide rod on a Glock pistol? The only reason I ask is that I seem to have chewed off the "nail head" on my guide rod...completely! The spring falls right off the end of the rod. I understand this is not unusual for an old spring and rod assembly, but this one has seen less than 3,000 rounds fired since the last spring change. It worried me for a minute, but neither I nor my gunsmith can find anything it can catch on in that area, and it slides cleanly and quietly, so it boils down to just regular wear as best we can tell. His rod didn't show any signs of abuse after 24 rounds, so.... __________________ Back in black, and better than ever! You can't keep a good gorilla down! LSU Geaux Tigers!

11-30-2011, 08:50 PM	#2
macsauce13 Have My Own Room Join Date: Mar 2010 First Name: McKenzie Location: Lexington, KY Posts: 1,107 Trading: (38)	*Re: For all you stock* Glock owners...** Did you check the AC delternator-alternator? Thats what i'd do...

11-30-2011, 09:50 PM	#3
elderboy02 Lets Go Buckeyes! Join Date: Oct 2008 First Name: Dan Location: Cincinnati, OH Posts: 12,497 Trading: (133)	*Re: For all you stock* Glock owners...** I have never had problems with my G23 (.40 S&W). I would call Glock in Smyrna, GA and see what they have to say. http://www.glock.com/english/index_contact.htm

11-30-2011, 09:51 PM	#4
Vic81 Just in from the Storm Join Date: Jun 2011 First Name: Vic Location: Marietta Posts: 28 Trading: (0)	*Re: For all you stock* Glock owners...** I've had my 27 (40cal) for over 10 years and never had a problem with it. But if I did, I would take it to the factory which is just around the corner. Have you talked to anyone at Glock?

12-01-2011, 01:03 AM	#5
sikk50 Just Bored Really... Join Date: Oct 2008 First Name: Andrew Location: The Jefferson State Posts: 2,084 Trading: (13)	*Re: For all you stock* Glock owners...** I have two glocks bc I know I can treat them like a $.02 whore and they'll still shoot straight everytime. You may have a deeper problem __________________ "Not a Headache in a Hogshead"

12-01-2011, 03:13 AM	#6
longknocker Postwhore Join Date: Oct 2008 First Name: Greg Location: Mobile, Alabama Posts: 11,115 Trading: (82)	*Re: For all you stock* Glock owners...** New Glock Owner, Here, With A 4th Gen. Model 22. No Problems After 500 Rounds. Like Others Said, Call Glock & GL. Keep Us Informed!

12-02-2011, 08:05 AM	#7
Silound ex-CS Swamp Gorilla Join Date: Nov 2008 Location: Somewhere in a swamp, south of sanity Posts: 802 Trading: (15)	*Re: For all you stock* Glock owners... I called yesterday during lunch. They confirmed that there is nothing in that area of the pistol that can damage that recoil rod except the recoil of the gun firing, and that chipping of the "nail head" was most commonly associated to heavy use wear, and part of why they recommend replacement every 2,000-5,000 rounds (depending on the model). Especially on larger calibers where the recoil trap is more violent. Did I mention this particular gun is a 2nd Gen 21? Also, I asked about the after market rods (metal ones) while I was talking to the guy, and I was advised that the stainless aftermarket rods, while to spec, could possibly shorten the lifetime of the gun. Apparently the polymer rods are designed to flex and soften some of the recoil force on the working parts of the gun, whereas the metal rods don't do that. Is it BS? I don't know, but it seems plausible in theory though. At any rate, they were very helpful about the deal, and even offered to tell me all the local authorized Glock dealers in my area who could order parts for me. New rods should arrive today in the mail, so I'll be right as rain by tomorrow. __________________ Back in black, and better than ever! You can't keep a good gorilla down! LSU** Geaux Tigers!

12-02-2011, 08:16 AM	#8
elderboy02 Lets Go Buckeyes! Join Date: Oct 2008 First Name: Dan Location: Cincinnati, OH Posts: 12,497 Trading: (133)	*Re: For all you stock* Glock owners...** Very cool! I knew Glock would take care of you. They are a stand up company

12-02-2011, 08:16 AM	#9
replicant_argent Gravy Boat Winnah. Join Date: Oct 2008 First Name: Pete Location: my attorney has advised against giving this information to insane people Posts: 5,326 Trading: (22)	*Re: For all you stock* Glock owners...** I had one lock up on my early second gen G17 (bought about 20 years ago) after about 3 or 4 thousand rounds. That was probably over 12 years ago. I happened to run by a local gun store with a Glock rep showing off new pistols at the time, he tossed me a new one for free and I haven't had a problem with a couple thousand more rounds down the pipe since. I can't speak for any newer gen versions or the aftermarket rods, but mine is pretty much bone stock except for the front sight. If the tool ain't broke... edit: Many of the first few K rounds through mine were reloads, and a good percentage of them were fairly hot. __________________ www.stogietorch.com Some days call for a stiff Pomade. Last edited by replicant_argent; 12-02-2011 at 08:25 AM.

12-02-2011, 12:49 PM	#10
bonjing ¯\_(ツ)_/¯ Join Date: Nov 2008 Posts: 3,971 Trading: (39)	*Re: For all you stock* Glock owners...** We've broken a few, but it comes from normal wear and tear.