for car guys out there.

GTsetGO · 01-08-2009, 02:35 PM

I got my car dyno tuned yesterday. She threw down:

286 hp / 310 tq naturally aspirated
387 hp / 460 tq on a 100 shot of nitrous.

Let me know if you can tell when the nitrous kicks in.

Mugen910 · 01-08-2009, 02:37 PM

Quote:

Originally Posted by GTsetGO

I got my car dyno tuned yesterday. She threw down:

286 hp / 310 tq naturally aspirated
387 hp / 460 tq on a 100 shot of nitrous.

Let me know if you can tell when the nitrous kicks in.

Thought the car was going to jump off the rollers!

karmaz00 · 01-08-2009, 02:38 PM

frickin awesome...love the NO2....my cousin has an eclipse with nitro...frickin insane.

GTsetGO · 01-08-2009, 02:39 PM

Quote:

Originally Posted by Mugen910

Thought the car was going to jump off the rollers!

no kidding. i am in love with the car again. it has had a bad tune for about a year and a half now. it drives better than it did when it came off the lot with the new tune.

Langod · 01-08-2009, 02:48 PM

Great numbers, dude! What year is that? I can't really see -- looks like a 99-04?

387 rwhp out of a GT's 4.6 is very impressive (and getting close to blowing it up, btw, unless you've done some major work to the internals.)
You're right up there with my 03 Cobra. (396rwhp)
And your 460 torque is CRAZY!

GTsetGO · 01-08-2009, 02:54 PM

Quote:

Originally Posted by Langod

Great numbers, dude! What year is that? I can't really see -- looks like a 99-04?

387 rwhp out of a GT's 4.6 is very impressive (and getting close to blowing it up, btw, unless you've done some major work to the internals.)
You're right up there with my 03 Cobra. (396rwhp)
And your 460 torque is CRAZY!

it's an 04GT

400-450 is when they tend to go boom, but normally when they don't ahve a safe tune. this one is very safe.

an engine build will be in the future though

Lorglath · 01-08-2009, 03:22 PM

I am not even a car guy and my jaw dropped! I too thought your car was going to rip off the dynos when the nos kicked in!

01-08-2009, 03:24 PM

Not bad at all for a 4.6 2 valve!

Yea you can hear the n20 pretty easy.

Don't build the motor swap for an LS1

lol.

s15driftking · 01-08-2009, 03:29 PM

that's an extremely nice jump for a 100-shot.

Pray for those piston tops and head gaskets!

Mustang1 · 01-08-2009, 03:54 PM

Nice brother! I have an 03' that I just finally finished. Forged bottom end, head and cam work and a D1SC ProCharger. I was just starting to break her in when it started to snow here in Cleveland.

Break-in tune will only let her build to a whopping one lb. of boost for now.

Looking to put down over 500 rwhp/tq, when all is said and done.

Good luck and congrats, smoke one of your better sticks to celebrate.

MTB996 · 01-08-2009, 04:55 PM

Nice numbers.

Keep thinking about scrapping my warranty and putting in either a big cam or maggie myself.

s15driftking · 01-08-2009, 06:14 PM

Quote:

Originally Posted by MTB996

Nice numbers.

Keep thinking about scrapping my warranty and putting in either a big cam or maggie myself.

LS1 + Mag = sexy

i was going to build a c5... then i realized that it just wasnt practical.... for work, heehhehe

loki · 01-08-2009, 06:17 PM

Quote:

Originally Posted by s15driftking

that's an extremely nice jump for a 100-shot.

Pray for those piston tops and head gaskets!

100 is pretty safe on that car, nothing to really worry about.

nice numbers

s15driftking · 01-08-2009, 06:35 PM

Quote:

Originally Posted by loki

100 is pretty safe on that car, nothing to really worry about.

nice numbers

agreed and agreed... just wait till 100shot isnt enough... then he'll see....

the endges of those pistons will look like the surface of the moon! LOL, JK

No hate, all love!

01-08-2009, 06:39 PM

Quote:

Originally Posted by s15driftking

agreed and agreed... just wait till 100shot isnt enough... then he'll see....

the endges of those pistons will look like the surface of the moon! LOL, JK

No hate, all love!

N2o Jet size, psi or cam duration, never enough.

Once you start a car... it goes down hill fast.

Rabidsquirrel · 01-08-2009, 06:52 PM

Do you happen to have a link to the dyno sheet?

I would love to own an 03-04 Cobra. I was looking for an engine from a wreaked one to put into my '90 Tbird SuperCoupe, but for the price I could build something much better.

GTsetGO · 01-08-2009, 06:53 PM

Oh, I know all about the internals of this machine. What you have to worry about is the connecting rods for the pistons.

The next step for the car is to stroke the block out to a 5.0, put 4V heads on it and up the shot to a 200 shot. Forged 11.5 to 1 pistons, forged h beams and cobra crank.

I am looking for 400 hp na and close to 650 on the juice

GTsetGO · 01-08-2009, 06:55 PM

Quote:

Originally Posted by Rabidsquirrel

Do you happen to have a link to the dyno sheet?

I would love to own an 03-04 Cobra. I was looking for an engine from a wreaked one to put into my '90 Tbird SuperCoupe, but for the price I could build something much better.

here you go

MTB996 · 01-08-2009, 07:42 PM

Quote:

Originally Posted by s15driftking

LS1 + Mag = sexy

i was going to build a c5... then i realized that it just wasnt practical.... for work, heehhehe

LS3's like Maggies a lot. 500+ RWHP is pretty safe.

I'm waiting on an aftermarket version of the ZR1s Eaton 4-lobe - that might just sway my opinion on modding the car hard!

I have twin 3 year olds and bought a 2 seater - F practical, you only live once.

Sailchaser · 01-08-2009, 07:48 PM

Very sweet and yes I can tell when it KICKS IN

01-08-2009, 02:35 PM	#1
GTsetGO those were the droids Join Date: Nov 2008 First Name: Rob Location: Newport News, VA Posts: 1,686 Trading: (5)	for car guys out there. I got my car dyno tuned yesterday. She threw down: 286 hp / 310 tq naturally aspirated 387 hp / 460 tq on a 100 shot of nitrous. Let me know if you can tell when the nitrous kicks in. __________________ Modded Mustangs

01-08-2009, 02:38 PM	#3
karmaz00 Habanos Join Date: Dec 2008 First Name: Jason Location: victoria Posts: 1,855 Trading: (1)	Re: for car guys out there. frickin awesome...love the NO2....my cousin has an eclipse with nitro...frickin insane.

01-08-2009, 02:48 PM	#5
Langod NH Masshole Join Date: Oct 2008 First Name: Jim Location: Londonderry, NH Posts: 257 Trading: (3)	Re: for car guys out there. Great numbers, dude! What year is that? I can't really see -- looks like a 99-04? 387 rwhp out of a GT's 4.6 is very impressive (and getting close to blowing it up, btw, unless you've done some major work to the internals.) You're right up there with my 03 Cobra. (396rwhp) And your 460 torque is CRAZY! __________________ Jim

01-08-2009, 03:22 PM	#7
Lorglath Still Watching My Back Join Date: Dec 2008 Location: Bloomington, MN Posts: 75 Trading: (0)	Re: for car guys out there. I am not even a car guy and my jaw dropped! I too thought your car was going to rip off the dynos when the nos kicked in!

01-08-2009, 03:24 PM	#8
Ace$nyper Guest Posts: n/a	Re: for car guys out there. Not bad at all for a 4.6 2 valve! Yea you can hear the n20 pretty easy. Don't build the motor swap for an LS1 lol.

01-08-2009, 03:29 PM	#9
s15driftking Go Browns! Join Date: Nov 2008 First Name: Bobby Location: Columbus Ohio Posts: 2,763 Trading: (16)	Re: for car guys out there. that's an extremely nice jump for a 100-shot. Pray for those piston tops and head gaskets! __________________ diamonds/guns

01-08-2009, 03:54 PM	#10
Mustang1 Just in from the Storm Join Date: Oct 2008 Location: Cleveland, OH Posts: 21 Trading: (0)	Re: for car guys out there. Nice brother! I have an 03' that I just finally finished. Forged bottom end, head and cam work and a D1SC ProCharger. I was just starting to break her in when it started to snow here in Cleveland. Break-in tune will only let her build to a whopping one lb. of boost for now. Looking to put down over 500 rwhp/tq, when all is said and done. Good luck and congrats, smoke one of your better sticks to celebrate.

01-08-2009, 04:55 PM	#11
MTB996 Adjusting to the Life Join Date: Oct 2008 Location: Hillsborough, NC Posts: 317 Trading: (1)	Re: for car guys out there. Nice numbers. Keep thinking about scrapping my warranty and putting in either a big cam or maggie myself.

01-08-2009, 06:52 PM	#16
Rabidsquirrel Moderately Confused Join Date: Oct 2008 Location: Pennsylvania, US Posts: 576 Trading: (5)	Re: for car guys out there. Do you happen to have a link to the dyno sheet? I would love to own an 03-04 Cobra. I was looking for an engine from a wreaked one to put into my '90 Tbird SuperCoupe, but for the price I could build something much better.

01-08-2009, 06:53 PM	#17
GTsetGO those were the droids Join Date: Nov 2008 First Name: Rob Location: Newport News, VA Posts: 1,686 Trading: (5)	Re: for car guys out there. Oh, I know all about the internals of this machine. What you have to worry about is the connecting rods for the pistons. The next step for the car is to stroke the block out to a 5.0, put 4V heads on it and up the shot to a 200 shot. Forged 11.5 to 1 pistons, forged h beams and cobra crank. I am looking for 400 hp na and close to 650 on the juice __________________ Modded Mustangs

01-08-2009, 07:48 PM	#20
Sailchaser Black Ops-SOB Join Date: Oct 2008 First Name: Chris Location: SCS,MI(Somewere Cigar Smoking) Posts: 1,733 Trading: (7)	Re: for car guys out there. Very sweet and yes I can tell when it KICKS IN __________________ "Sail Fast, Shoot Straight, Fish Hard and Save Time For The Important Things In Life"