Give me your "How to Cut" method - Page 2

Blak Smyth · 03-30-2012, 07:08 AM

I use a palio around the house and a Cuban Crafters on the go (Don't wanna loose my beloved Palio). I line up the blade with the first cap on the head, make sure the cigar is at a 90 degree angle from the blade and squeeze fast. Test draw an cut another cap line if necessary.

The most important tip for me was to check the 90 degree angle. Often you think you are straight until you look at it.

joeobx · 03-30-2012, 07:55 AM

I try to snip as small a peice of the cap as I can and then test the draw, if its tight I'll snip a little more.

shilala · 03-30-2012, 08:02 AM

If there's one area that really never mattered to me, it's this one. I'll cut a cap with whatever's at hand. If there's nothing at hand, I'll use my teeth.
I do like Xikar xi3 and xi1's, and have a few xi2's in travel humis. The only reason I prefer them is that they don't pinch my hand when I make a cut. I'm clumsy with sliding cutters.
Of all the cutters, my favorite ever are the sliders with the stop in the back and a hole in the center. They measure and cut precisely, handle Beli's nicely, and they're cheap.

Blak Smyth · 03-30-2012, 08:07 AM

Quote:

Originally Posted by shilala

Of all the cutters, my favorite ever are the sliders with the stop in the back and a hole in the center. They measure and cut precisely, handle Beli's nicely, and they're cheap.

Cuban Crafters makes a very affordable, really well made cutter like this

It is my back up to my Palio and it works great.

shilala · 03-30-2012, 08:11 AM

Quote:

Originally Posted by Blak Smyth

Cuban Crafters makes a very affordable, really well made cutter like this

It is my back up to my Palio and it works great.

I can't tell if that one is all metal, but it's exactly what I was talking about. So far as I'm concerned, it's the perfect design for a cutter. All the rest could go away and I wouldn't miss them a bit. (Except my Spectra Xi3. I wanna keep that one. )

Blak Smyth · 03-30-2012, 08:16 AM

Quote:

Originally Posted by shilala

I can't tell if that one is all metal, but it's exactly what I was talking about. So far as I'm concerned, it's the perfect design for a cutter. All the rest could go away and I wouldn't miss them a bit. (Except my Spectra Xi3. I wanna keep that one. )

Its a plastic housing, I believe they retail for about $15 and well worth it.

icehog3 · 03-30-2012, 09:45 AM

Quote:

Originally Posted by icehog3

Palio...I try to shave off the wrapper head without any other tobacco being cut. I am usually pretty close when not perfect.

Quote:

Originally Posted by BHalbrooks

Tom... what?

In other words, I try to cut off the wrapper part of the cap and nothing else. The piece I cut off is paper thin if I do it right.

BigJPinDC · 03-30-2012, 09:53 AM

Ever since the first time I tried the Wolf inverse-v cutter I haven't gone back. I only have a handful of sticks that are belicosos so I sould use the basic slide cutter for those but it's V-cut for me every time.

jp

irratebass · 03-30-2012, 10:14 AM

Quote:

Originally Posted by BigJPinDC

Ever since the first time I tried the Wolf inverse-v cutter I haven't gone back. I only have a handful of sticks that are belicosos so I sould use the basic slide cutter for those but it's V-cut for me every time.

jp

I have a nice V-Cutter that Shilala gifted me, I haven't perfected it yet.

Pseudosacred · 03-30-2012, 01:27 PM

Quote:

Originally Posted by BigJPinDC

Ever since the first time I tried the Wolf inverse-v cutter I haven't gone back. I only have a handful of sticks that are belicosos so I sould use the basic slide cutter for those but it's V-cut for me every time.

jp

I have 0 experiance with V's. They kind of intimidate me...for whatever reason...

Islayphile · 03-30-2012, 01:54 PM

Quote:

Originally Posted by icehog3

Palio...I try to shave off the wrapper head without any other tobacco being cut. I am usually pretty close when not perfect.

Yup

Palio, works like a frickin' laser!

Tbagley · 03-30-2012, 04:30 PM

Quote:

Originally Posted by OLS

By the way, OP, YOU DO know there were other user names available at the time you joined, right??

Oh I find rather funny as I've been called that all my life and never took offense as some do it! I was called Tbag before anyone knew what tbagging was all about and damn gavity has made me an even bigger one.

I've always tried to slice just a sliver off the cap but I've got neighbor's who will just hack into the end a good half inch. Never seemed right and they just won't learn.

tsolomon · 03-30-2012, 05:10 PM

A good quick cut with a Palio, taking the smallest cut off the end. I have a Xikar V-cutter I use on small rg cigars sometimes, real easy to use. You can turn the cigar 90 degrees and cut again if the draw is tight. Xikar MTX multi tool where you take off just a little bit at a time. Takes some time and practice to get use to, but you can really get a nice cut.

trendo · 03-30-2012, 07:02 PM

Quote:

Originally Posted by icehog3

Palio...I try to shave off the wrapper head without any other tobacco being cut. I am usually pretty close when not perfect.

Thats what I do, the "cranial twist" works good for this

04-04-2012, 09:38 AM

Quote:

Originally Posted by Smokin Gator

My preferred way is to run my pocket knife around the cap and then lift it off.

I saw you do this at Epic last year. I have tried to do this and have failed. Maybe at Epic this year you can show me your technique

ApexAZ · 04-04-2012, 03:52 PM

Quote:

Originally Posted by Pseudosacred

I have 0 experiance with V's. They kind of intimidate me...for whatever reason...

Same. Never used one. Never really looked at one. I envision it catching the cap and just ripping it off.

Smokin Gator · 04-04-2012, 03:55 PM

Quote:

Originally Posted by kickerb

I saw you do this at Epic last year. I have tried to do this and have failed. Maybe at Epic this year you can show me your technique

I'd be glad to

xFreebirdx · 04-04-2012, 04:52 PM

BigJPinDC · 04-04-2012, 06:20 PM

Quote:

Originally Posted by ApexAZ

Same. Never used one. Never really looked at one. I envision it catching the cap and just ripping it off.

Nope - the inverse-v pulls out instead of chopping through. IT works with nubs and lanceros alike. Give it a try.

shopkins82 · 04-04-2012, 07:54 PM

I like V and Punch here lately, but I keep a basic stainless slide cutter for the few belicosos I have on hand.

03-30-2012, 07:08 AM	#21
Blak Smyth Think Blue! Join Date: Jun 2011 First Name: SD Location: THE WOOD Posts: 8,486 Trading: (52)	Re: Give me your "How to Cut" method I use a palio around the house and a Cuban Crafters on the go (Don't wanna loose my beloved Palio). I line up the blade with the first cap on the head, make sure the cigar is at a 90 degree angle from the blade and squeeze fast. Test draw an cut another cap line if necessary. The most important tip for me was to check the 90 degree angle. Often you think you are straight until you look at it. __________________ SUPPORT OUR TROOPS

03-30-2012, 07:55 AM	#22
joeobx just playing in the storm Join Date: Oct 2009 First Name: Joe Location: Fredericksburg. VA VCM Country Posts: 1,117 Trading: (4)	Re: Give me your "How to Cut" method I try to snip as small a peice of the cap as I can and then test the draw, if its tight I'll snip a little more. __________________ it's all fun and games till the flying monkeys show up

03-30-2012, 08:02 AM	#23
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: Give me your "How to Cut" method If there's one area that really never mattered to me, it's this one. I'll cut a cap with whatever's at hand. If there's nothing at hand, I'll use my teeth. I do like Xikar xi3 and xi1's, and have a few xi2's in travel humis. The only reason I prefer them is that they don't pinch my hand when I make a cut. I'm clumsy with sliding cutters. Of all the cutters, my favorite ever are the sliders with the stop in the back and a hole in the center. They measure and cut precisely, handle Beli's nicely, and they're cheap. __________________

03-30-2012, 09:53 AM	#28
BigJPinDC Still Watching My Back Join Date: Jul 2011 First Name: JP Location: Nothern Virginia Posts: 75 Trading: (0)	Re: Give me your "How to Cut" method Ever since the first time I tried the Wolf inverse-v cutter I haven't gone back. I only have a handful of sticks that are belicosos so I sould use the basic slide cutter for those but it's V-cut for me every time. jp

03-30-2012, 05:10 PM	#33
tsolomon Have My Own Room Join Date: Oct 2008 First Name: Tom Location: The Villages, FL Posts: 1,240 Trading: (31)	Re: Give me your "How to Cut" method A good quick cut with a Palio, taking the smallest cut off the end. I have a Xikar V-cutter I use on small rg cigars sometimes, real easy to use. You can turn the cigar 90 degrees and cut again if the draw is tight. Xikar MTX multi tool where you take off just a little bit at a time. Takes some time and practice to get use to, but you can really get a nice cut.

04-04-2012, 04:52 PM	#38
xFreebirdx Patriot Guard Rider Join Date: Feb 2012 First Name: Eddie Location: Landrum, SC Posts: 201 Trading: (2)	Re: Give me your "How to Cut" method __________________ Veteran: ★US ARMY 78 - 81★.......★Patriot Guard Rider ID#45266 07/06/06★

04-04-2012, 07:54 PM	#40
shopkins82 Still Watching My Back Join Date: Feb 2012 Posts: 222 Trading: (1)	Re: Give me your "How to Cut" method I like V and Punch here lately, but I keep a basic stainless slide cutter for the few belicosos I have on hand.