First Firearm Thread. - Page 169

Digs · 12-03-2012, 09:30 AM

Quote:

Originally Posted by emopunker2004

that's a regular 01 ffl. same as a store front ffl. same ffl. it's easy to get if you make sure you get the zoning approved by the zoning board

Plus facilities & posted store hours etc etc. & retail store...

I know here is Pa in the gun show capital of the world ha-ha; you used to be able to apply for a 01 for gun show sales only. Pretty sure these are hard to get if not impossible anymore.

emopunker2004 · 12-03-2012, 09:47 AM

No store front needed. How could online sites sell online only?

jluck · 12-03-2012, 10:33 AM

Quote:

Originally Posted by emopunker2004

No store front needed. How could online sites sell online only?

My father in law has this type, He cannot have a actual commercial building/"store front". He sells from his home and online only. I don't know the nomenclature of his FFL, If it's real important I could ask.

emopunker2004 · 12-03-2012, 12:35 PM

Doesn't matter to me as I'm only going to get the 03 C&R FFL.

dijit · 12-03-2012, 12:42 PM

Here are a few things I just deciphered from BATFE regarding home FFL licensing. in order to have a class 01 FFL you need to show store hours and have a store front or if you want to be seen by appointment only then you need to acquire gunsmith certification or if I understand this right you need to have your firearms instructor certification and you can operate your home as a warehouse. I started my search here http://www.atf.gov/regulations-rulings/ and keep in mind all of these are captioned with you must comply with state zoning and licensing laws as well as the federal laws.

big pete · 12-03-2012, 03:35 PM

Anyone have experience with the 9mm Springfield XDm? Pros/cons?

Digs · 12-03-2012, 04:19 PM

Quote:

Originally Posted by big pete

Anyone have experience with the 9mm Springfield XDm? Pros/cons?

Yea, which one the 4.5 or 3.8? What are you intending do with it carry and target shooting.

big pete · 12-03-2012, 05:05 PM

3.8". Will be used for the range and home

RobR1205 · 12-03-2012, 05:47 PM

Hello fellow shooters. Happy to say that I qualified as an Expert in the rifle portion of the USCG Marksman Test today.

Our service weapon is the M16, where we are evaluated at three positions (prone, sitting, standing) at slow fire and rapid fire. The three qualifications you can receive are Basic (140/200), Sharpshooter (160/200), or Expert (175/200). I scored 178

TJarv · 12-03-2012, 05:55 PM

That's awesome Rob

Cigar Mike · 12-03-2012, 06:33 PM

Congrats!
More bling for your rack!

RobR1205 · 12-03-2012, 06:57 PM

Quote:

Originally Posted by Cigar Mike

Congrats!
More bling for your rack!

Now I can at least call it a rack...it was just one lonely National Defense Medal

emopunker2004 · 12-03-2012, 09:20 PM

great job Rob.

Well I think a few more days of wiping down the rifle stock with BLO and then a couple days of drying and she will be done. Pictures to come when it's all back together.

dijit · 12-04-2012, 07:24 AM

Quote:

Originally Posted by RobR1205

Hello fellow shooters. Happy to say that I qualified as an Expert in the rifle portion of the USCG Marksman Test today.

Our service weapon is the M16, where we are evaluated at three positions (prone, sitting, standing) at slow fire and rapid fire. The three qualifications you can receive are Basic (140/200), Sharpshooter (160/200), or Expert (175/200). I scored 178

Nice, Great job on the expert medal

dijit · 12-04-2012, 07:33 AM

Quote:

Originally Posted by big pete

Anyone have experience with the 9mm Springfield XDm? Pros/cons?

I have the XDm 4.5 in .45 ACP. Only drawback I Have had so far after about 200 rounds was occasionally the larger JHP 220 gr. didnt want to feed. Took it to my local gunsmith and the next day it worked great. He just polished the feeder ramp. 500 rounds later and no issues at all. I did go back to the 180 gr gold dots for defense carry. I can get almost 1150 fps if I home load without risking the frame from too much pressure.

To be honest I expected to be a little disappointed going from a Sig 256 in .357sig to the XD in .45 ACP but with the exception of the greater recoil both due to caliber and lighter frame it has performed very well.

hammondc · 12-04-2012, 07:57 AM

Quote:

Originally Posted by dijit

He just polished the feeder ramp.

I have this done on all my guns.

big pete · 12-04-2012, 08:40 AM

Seems like a toss up between the Glock 19 and XDM 3.8. I'll have to find a local dealer with the XDM in stock and see how it feels.

Digs · 12-04-2012, 10:26 AM

Quote:

Originally Posted by big pete

Seems like a toss up between the Glock 19 and XDM 3.8. I'll have to find a local dealer with the XDM in stock and see how it feels.

I own both, my G19 is my favorite.

Cigar Mike · 12-04-2012, 07:27 PM

Quote:

Originally Posted by hammondc

I have this done on all my guns.

Me, as well. I had a really inconstant feed problem on my daily carry (XD .45 ACP) until I did a little polishing on the feed ramp.

Since then I've paid attention to that on all my new guns when I get them. It really has made a big difference on my .22LRs, as I think that soft lead tends to catch burrs and rough spots more than jacketed rounds would.

Cigar Mike · 12-04-2012, 07:29 PM

Quote:

Originally Posted by RobR1205

Now I can at least call it a rack...it was just one lonely National Defense Medal

Fear not, Rob. In a couple years you'll be cursing every time you have some event or inspection and you have to go check DA just to make sure your rack's up to date. It'll seem like it happens all at once.

12-03-2012, 09:47 AM	#3362
emopunker2004 Central Fla rollin Join Date: Jan 2011 First Name: Justin Location: Winter Springs, FL Posts: 6,171 Trading: (46)	Re: First Firearm Thread. No store front needed. How could online sites sell online only? __________________ Cigar Asylum: Where all are equal, unless you are from CA, then you are more equal.

12-03-2012, 12:35 PM	#3364
emopunker2004 Central Fla rollin Join Date: Jan 2011 First Name: Justin Location: Winter Springs, FL Posts: 6,171 Trading: (46)	Re: First Firearm Thread. Doesn't matter to me as I'm only going to get the 03 C&R FFL. __________________ Cigar Asylum: Where all are equal, unless you are from CA, then you are more equal.

12-03-2012, 12:42 PM	#3365
dijit Have My Own Room Join Date: Feb 2012 First Name: Mike Location: Brownsburg, Indiana Posts: 2,186 Trading: (48)	Re: First Firearm Thread. Here are a few things I just deciphered from BATFE regarding home FFL licensing. in order to have a class 01 FFL you need to show store hours and have a store front or if you want to be seen by appointment only then you need to acquire gunsmith certification or if I understand this right you need to have your firearms instructor certification and you can operate your home as a warehouse. I started my search here http://www.atf.gov/regulations-rulings/ and keep in mind all of these are captioned with you must comply with state zoning and licensing laws as well as the federal laws. __________________ Sporting goods raffle for a great cause. PM me for tickets.

12-03-2012, 03:35 PM	#3366
big pete Going to the darkside.... Join Date: Dec 2011 Location: Bay Area Posts: 1,276 Trading: (20)	Re: First Firearm Thread. Anyone have experience with the 9mm Springfield XDm? Pros/cons?

12-03-2012, 05:05 PM	#3368
big pete Going to the darkside.... Join Date: Dec 2011 Location: Bay Area Posts: 1,276 Trading: (20)	Re: First Firearm Thread. 3.8". Will be used for the range and home

12-03-2012, 05:47 PM	#3369
RobR1205 Starting a new chapter Join Date: Dec 2011 First Name: Rob Location: Texas Posts: 1,158 Trading: (19)	Re: First Firearm Thread. Hello fellow shooters. Happy to say that I qualified as an Expert in the rifle portion of the USCG Marksman Test today. Our service weapon is the M16, where we are evaluated at three positions (prone, sitting, standing) at slow fire and rapid fire. The three qualifications you can receive are Basic (140/200), Sharpshooter (160/200), or Expert (175/200). I scored 178

12-03-2012, 05:55 PM	#3370
TJarv In it to win it Join Date: Mar 2012 First Name: Tony Location: Aubrey, Texas Posts: 2,027 Trading: (58)	Re: First Firearm Thread. That's awesome Rob __________________ Proud member of the GMCGTPWHAFA

12-03-2012, 06:33 PM	#3371
Cigar Mike Thankful. Join Date: Jan 2012 First Name: Mike Location: Kingdom of Bahrain Posts: 153 Trading: (2)	Re: First Firearm Thread. Congrats! More bling for your rack!

12-03-2012, 09:20 PM	#3373
emopunker2004 Central Fla rollin Join Date: Jan 2011 First Name: Justin Location: Winter Springs, FL Posts: 6,171 Trading: (46)	Re: First Firearm Thread. great job Rob. Well I think a few more days of wiping down the rifle stock with BLO and then a couple days of drying and she will be done. Pictures to come when it's all back together. __________________ Cigar Asylum: Where all are equal, unless you are from CA, then you are more equal.

12-04-2012, 08:40 AM	#3377
big pete Going to the darkside.... Join Date: Dec 2011 Location: Bay Area Posts: 1,276 Trading: (20)	Re: First Firearm Thread. Seems like a toss up between the Glock 19 and XDM 3.8. I'll have to find a local dealer with the XDM in stock and see how it feels.