Carving my own pipe project

thebayratt · 11-27-2012, 08:26 PM

A few months ago, I got a straight shanked predrilled briar block from www.pipesandcigars.com . I had set it aside due to a few projects already in the works. But finally, I got a chance to work on it.

It started as this:

Drew a few sketches out on paper and decided on a general plan of carving and sanding the briar. Then drew out the "plan" onto the block. Making sure to give enough room to not take out too much briar and cause a burnout.

I roughed out the lines with a handsaw giving me room for sanding and tweeking the shape.
Then my buddy who has a very nice shop got a new benchtop belt/disc sander for his carpentry job and for carving pipes as well. So today, we broke it in and I went to town on the briar and came up with this:

I had wanted a straighter bowl, but once into the sanding, I realized I like the tapered look to it to give an ergonomic feal to it. I had also wanted it to be a sitter that would have the stem raised up off the surface, but that didn't turn out in the sandings.

After that, I sanded it with 120, 200, then 400 grit sand paper to make it baby butt smooth. Its got a few imperfections, but its a learning process. It feals really good in the hands and I hope for it to smoke well. I'll post more pics as I progress.

Question: Can I use regular wood stain, or is the alcohol based stain better to use for pipes?

Fordman4ever · 11-27-2012, 08:58 PM

Sounds like a lot of fun. Can't see the pictures, but sounds pretty good.

thebayratt · 11-29-2012, 10:15 PM

Hmmm... I wonder why you can't see the pics. I can see them on my end. I'll retry the pics.

thebayratt · 12-03-2012, 07:38 PM

Retry on the pics

I haven't taken any yet after I sanded it. I'll do that later on.

Cigar Mike · 12-03-2012, 07:49 PM

Looks good!

jjmitchem · 12-11-2012, 06:32 PM

Keep us posted

I'm thinking about getting a couple of those predrillled blocks to play with also

Fordman4ever · 12-11-2012, 06:42 PM

Starting to look like a great project. I'd love to start one of my own.

688sonarmen · 12-11-2012, 07:57 PM

Nice start Shawn, how is it coming along?

thebayratt · 12-12-2012, 11:11 AM

I haven't worked on it in a while. It still needs more sanding with some 400 grit paper. The last pic posted isn't its current condition, its alot more smoother.
Got a $1700 hitch that happened at the house recently, so all un needed spendings has stopped for a little bit. Once im back to good, I'll get the stain and waxing done and post more pics.

688sonarmen · 12-14-2012, 04:07 PM

Quote:

Originally Posted by thebayratt

I haven't worked on it in a while. It still needs more sanding with some 400 grit paper. The last pic posted isn't its current condition, its alot more smoother.
Got a $1700 hitch that happened at the house recently, so all un needed spendings has stopped for a little bit. Once im back to good, I'll get the stain and waxing done and post more pics.

It's all good Shawn, that stuff always seems to hit at the wrong time

11-27-2012, 08:26 PM	#1
thebayratt Still Watching My Ash Join Date: Jan 2010 First Name: Shawn Location: Mississippi Posts: 1,326 Trading: (11)	Carving my own pipe project A few months ago, I got a straight shanked predrilled briar block from www.pipesandcigars.com . I had set it aside due to a few projects already in the works. But finally, I got a chance to work on it. It started as this: Drew a few sketches out on paper and decided on a general plan of carving and sanding the briar. Then drew out the "plan" onto the block. Making sure to give enough room to not take out too much briar and cause a burnout. I roughed out the lines with a handsaw giving me room for sanding and tweeking the shape. Then my buddy who has a very nice shop got a new benchtop belt/disc sander for his carpentry job and for carving pipes as well. So today, we broke it in and I went to town on the briar and came up with this: I had wanted a straighter bowl, but once into the sanding, I realized I like the tapered look to it to give an ergonomic feal to it. I had also wanted it to be a sitter that would have the stem raised up off the surface, but that didn't turn out in the sandings. After that, I sanded it with 120, 200, then 400 grit sand paper to make it baby butt smooth. Its got a few imperfections, but its a learning process. It feals really good in the hands and I hope for it to smoke well. I'll post more pics as I progress. Question: Can I use regular wood stain, or is the alcohol based stain better to use for pipes? __________________ Keep on smoking my friends! http://nicetightash.com/

11-27-2012, 08:58 PM	#2
Fordman4ever Redneck driving a ricer!! Join Date: Dec 2010 First Name: Earl Location: A place too cold to smoke outside Posts: 2,508 Trading: (26)	Re: Carving my own pipe project Sounds like a lot of fun. Can't see the pictures, but sounds pretty good. __________________

11-29-2012, 10:15 PM	#3
thebayratt Still Watching My Ash Join Date: Jan 2010 First Name: Shawn Location: Mississippi Posts: 1,326 Trading: (11)	Re: Carving my own pipe project Hmmm... I wonder why you can't see the pics. I can see them on my end. I'll retry the pics. __________________ Keep on smoking my friends! http://nicetightash.com/

12-03-2012, 07:38 PM	#4
thebayratt Still Watching My Ash Join Date: Jan 2010 First Name: Shawn Location: Mississippi Posts: 1,326 Trading: (11)	Re: Carving my own pipe project Retry on the pics I haven't taken any yet after I sanded it. I'll do that later on. __________________ Keep on smoking my friends! http://nicetightash.com/

12-03-2012, 07:49 PM	#5
Cigar Mike Thankful. Join Date: Jan 2012 First Name: Mike Location: Kingdom of Bahrain Posts: 153 Trading: (2)	Re: Carving my own pipe project Looks good!

12-11-2012, 06:32 PM	#6
jjmitchem Adjusting to the Life Join Date: Dec 2009 First Name: Jim "Chappy" Location: Ft Campbell Posts: 445 Trading: (3)	Re: Carving my own pipe project Keep us posted I'm thinking about getting a couple of those predrillled blocks to play with also __________________ "I'm not ashamed of anything whatever that I do, and I don't feel that smoking makes me ashamed, and therefore I mean to smoke to the glory of God." - Charles Spurgeon

12-11-2012, 06:42 PM	#7
Fordman4ever Redneck driving a ricer!! Join Date: Dec 2010 First Name: Earl Location: A place too cold to smoke outside Posts: 2,508 Trading: (26)	Re: Carving my own pipe project Starting to look like a great project. I'd love to start one of my own. __________________

12-11-2012, 07:57 PM	#8
688sonarmen Shipmate! Join Date: Mar 2009 First Name: Jake Location: Norwich, Ct Posts: 2,698 Trading: (17)	Re: Carving my own pipe project Nice start Shawn, how is it coming along?

12-12-2012, 11:11 AM	#9
thebayratt Still Watching My Ash Join Date: Jan 2010 First Name: Shawn Location: Mississippi Posts: 1,326 Trading: (11)	Re: Carving my own pipe project I haven't worked on it in a while. It still needs more sanding with some 400 grit paper. The last pic posted isn't its current condition, its alot more smoother. Got a $1700 hitch that happened at the house recently, so all un needed spendings has stopped for a little bit. Once im back to good, I'll get the stain and waxing done and post more pics. __________________ Keep on smoking my friends! http://nicetightash.com/