First Firearm Thread. - Page 44

Cigarcop · 04-30-2009, 08:11 PM

Well today I got tired of looking at the Ed Brown 1911 Kobra Carry (Stainless/Blue) in the case just calling to me every time I was in there!!!! and it now has a new home

04-30-2009, 08:38 PM

Quote:

Originally Posted by Cigarcop

Well today I got tired of looking at the Ed Brown 1911 Kobra Carry (Stainless/Blue) in the case just calling to me every time I was in there!!!! and it now has a new home

Nice!

Mark C · 05-01-2009, 11:12 AM

Quote:

Originally Posted by floydpink

Which gun forum has a cigar section?

I was thinking of a local board, www.mdshooters.com

macms · 05-03-2009, 04:27 PM

AAlmeter · 05-04-2009, 05:56 PM

I do enough yappin' in this thread, I guess I'll post some pictures....

(I'm not much of a photographer)

Catfish · 05-04-2009, 06:03 PM

lovin the flat top AR. Is that just a heavy barrel or is that chambered for .308? meh... maybe not. The upper doesn't look like it's capable of handling .308.

05-04-2009, 06:07 PM

What's the green gun?

AAlmeter · 05-04-2009, 06:09 PM

.223 that is being swapped out shortly for a .223 without a flash suppressor.

The green gun is a Rem 597 .22

05-05-2009, 11:34 AM

Quote:

Originally Posted by BC-Axeman

What's the green gun?

Remington Model 597 .22 LR

replicant_argent · 05-05-2009, 11:37 AM

Has anyone shot a Micro DE?

elderboy02 · 05-05-2009, 11:39 AM

Quote:

Originally Posted by JE3146

Yup... I've seen dan in there from time to time
Posted via Mobile Device

You need to post in that forum too

weak_link · 05-05-2009, 01:08 PM

Got some new parts in for the 10/22 yesterday. Trigger pull went from 6# + to right about 2.5#.

Also doing some long term baby sitting on a 1948 Remington Model 81 in .300 savage. Spend all day Sunday bringing it back to life and still have more work to do. Going to take it out to the range and see if it blows up before I do anymore work on it.

This is not the rifle but looks just like this one. Just a lot more beat up.

JE3146 · 05-07-2009, 03:13 PM

I barely have enough time to post here. Lol

Quote:

Originally Posted by elderboy02

You need to post in that forum too

Posted via Mobile Device

Mark C · 05-10-2009, 05:34 AM

Most recent purchase:

6 1/2" Glossy Stainless Single Six w/ fixed sights ('baby vaquero'). A little mother's polish and it shines like a mirror now. I never knew single action revolvers could be so fun.

elderboy02 · 05-10-2009, 06:18 AM

Quote:

Originally Posted by Mark C

Most recent purchase:

6 1/2" Glossy Stainless Single Six w/ fixed sights ('baby vaquero'). A little mother's polish and it shines like a mirror now. I never knew single action revolvers could be so fun.

Nice pickup!

Bruins Fan · 05-10-2009, 07:22 AM

Quote:

Originally Posted by Mark C

Most recent purchase:

6 1/2" Glossy Stainless Single Six w/ fixed sights ('baby vaquero'). A little mother's polish and it shines like a mirror now. I never knew single action revolvers could be so fun.

Nice, I love that gun, I need to pick one up my grand kid wants to go plinking, all my stuff is a little to big

gpugliese · 05-10-2009, 08:46 AM

5.56 upper comes in next week, and I recently got in a Ciener .22 conversion (hence the black dog magazine). Can't wait!

JE3146 · 05-10-2009, 11:41 AM

Quote:

Originally Posted by gpugliese

5.56 upper comes in next week, and I recently got in a Ciener .22 conversion (hence the black dog magazine). Can't wait!

Let me know how the black dog mag works out. I've been eyeballing them for my M261 kit.

weak_link · 05-10-2009, 05:44 PM

Well I shot that old Remington Model 81 today and my shoulder is officially p.o.'d at me. Makes an old Mossin Nagant seem like a .22. The thing bit my thumb while loading it, then it proceeded to pound my shoulder into mince meat after only one 5 shot group. Aluminium butt plate didn't help and I sure could have used a shoulder pad. Yah, I'm'a wuss. Said 'thank you very much for the experience' and laid it back down in order to spend some quality time with my other guns.

05-10-2009, 07:22 PM

Quote:

Originally Posted by Mark C

I was thinking of a local board, www.mdshooters.com

very good site. If you get on there I have the same username

04-30-2009, 08:11 PM	#861
Cigarcop Wishin I Was Fishin Join Date: Oct 2008 Location: Pa, In a treestand Posts: 1,434 Trading: (40)	Re: First Firearm Thread. Well today I got tired of looking at the Ed Brown 1911 Kobra Carry (Stainless/Blue) in the case just calling to me every time I was in there!!!! and it now has a new home

05-03-2009, 04:27 PM	#864
macms ΜΟΛΩΝ ΛΑΒΕ Join Date: Oct 2008 Location: Mile High Posts: 996 Trading: (56)	Re: First Firearm Thread. __________________

05-04-2009, 05:56 PM	#865
AAlmeter F.U.B.O. Join Date: Oct 2008 First Name: Adam Location: Buffalo Posts: 288 Trading: (0)	Re: First Firearm Thread. I do enough yappin' in this thread, I guess I'll post some pictures.... (I'm not much of a photographer)

05-04-2009, 06:03 PM	#866
Catfish ΜΟΛΩΝ ΛΑΒΕ MO FUGGA! Join Date: Jan 2009 First Name: David Location: Lakeland, Fl. Posts: 1,707 Trading: (24)	Re: First Firearm Thread. lovin the flat top AR. Is that just a heavy barrel or is that chambered for .308? meh... maybe not. The upper doesn't look like it's capable of handling .308. __________________ 1: It's ALWAYS Loaded. 2: Do Not Point It At Something Unless You Mean To Destroy It. 3: On Target, On Trigger. Off Target, Off Trigger. 4: Be Sure Of Your Target And What's Behind It.Join The NRA

05-04-2009, 06:07 PM	#867
BC-Axeman Guest Posts: n/a	Re: First Firearm Thread. What's the green gun?

05-04-2009, 06:09 PM	#868
AAlmeter F.U.B.O. Join Date: Oct 2008 First Name: Adam Location: Buffalo Posts: 288 Trading: (0)	Re: First Firearm Thread. .223 that is being swapped out shortly for a .223 without a flash suppressor. The green gun is a Rem 597 .22

05-05-2009, 11:37 AM	#870
replicant_argent Gravy Boat Winnah. Join Date: Oct 2008 First Name: Pete Location: my attorney has advised against giving this information to insane people Posts: 5,326 Trading: (22)	Re: First Firearm Thread. Has anyone shot a Micro DE? __________________ www.stogietorch.com Some days call for a stiff Pomade.

05-05-2009, 01:08 PM	#872
weak_link The Stranger Join Date: Oct 2008 First Name: Eric Location: SF Bay Area, CA Posts: 1,263 Trading: (1)	Re: First Firearm Thread. Got some new parts in for the 10/22 yesterday. Trigger pull went from 6# + to right about 2.5#. Also doing some long term baby sitting on a 1948 Remington Model 81 in .300 savage. Spend all day Sunday bringing it back to life and still have more work to do. Going to take it out to the range and see if it blows up before I do anymore work on it. This is not the rifle but looks just like this one. Just a lot more beat up.

05-10-2009, 05:34 AM	#874
Mark C Feeling at Home Join Date: Oct 2008 Location: SE PA Posts: 674 Trading: (4)	Re: First Firearm Thread. Most recent purchase: 6 1/2" Glossy Stainless Single Six w/ fixed sights ('baby vaquero'). A little mother's polish and it shines like a mirror now. I never knew single action revolvers could be so fun.

05-10-2009, 08:46 AM	#877
gpugliese B.Y.O.B. Join Date: Oct 2008 First Name: Greg Location: Van down by the river Posts: 424 Trading: (13)	Re: First Firearm Thread. 5.56 upper comes in next week, and I recently got in a Ciener .22 conversion (hence the black dog magazine). Can't wait! __________________ - Greg

05-10-2009, 05:44 PM	#879
weak_link The Stranger Join Date: Oct 2008 First Name: Eric Location: SF Bay Area, CA Posts: 1,263 Trading: (1)	Re: First Firearm Thread. Well I shot that old Remington Model 81 today and my shoulder is officially p.o.'d at me. Makes an old Mossin Nagant seem like a .22. The thing bit my thumb while loading it, then it proceeded to pound my shoulder into mince meat after only one 5 shot group. Aluminium butt plate didn't help and I sure could have used a shoulder pad. Yah, I'm'a wuss. Said 'thank you very much for the experience' and laid it back down in order to spend some quality time with my other guns.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode