New Pipe Smoker With A Question? Ask an Old Fart

[Mister Moo]

Originally Posted by yellowgoat

My ring fell off the Briar part of my pipe. See pic. Can I use crazy glue?

Besides a slight-slight possible outgassing of toxics from heated cyanoacrylates I don't have best results with them when mating gapped surfaces. Constant heating/cooling and expansion/contraction would send me to something non-toxic that handles expansion better, like a drop or two of Elmers wood glue.

The expert on this, however, is not me. This is only an educated guess. Is there a pipemaker in the house?

[JaKaacH]

Originally Posted by Mister Moo

Besides a slight-slight possible outgassing of toxics from heated cyanoacrylates I don't have best results with them when mating gapped surfaces. Constant heating/cooling and expansion/contraction would send me to something non-toxic that handles expansion better, like a drop or two of Elmers wood glue.

The expert on this, however, is not me. This is only an educated guess. Is there a pipemaker in the house?

That is true, the "superglues" are not very flexible. I don't know how well the wood glue would bond to the metal ring though.
Maybe the Elmers Ultimate glue would be better. Claims to "bond anything to anything." (Elmers version of Gorilla Glue)
http://www.elmers.com/homerepair/ultimate/
Again use a very tiny amount of glue.