Project Cabinet Humidor (Pic Heavy)

O-Danger · 01-06-2009, 08:59 PM

And then once the 6 coats of varnish were on (sanding in between each second coat) I installed the drawers

I made a simple shelf and then installed the glass with one inch thick Spanish cedar and covered the whole rim in weatherstripping for a good seal.

Not too bad for 2 weeks start to finish. I didn’t have time to sand this down as I took these pictures 4 hours before I had to be out the door for a flight back to school.

One last pic is the initial master plan

When I get back in May I am putting in dividers and humi beads. Needless to say I spent my cigar budget already!

I Hope you like it as much as I do.

01-06-2009, 08:59 PM	#5
O-Danger Still Watching My Back Join Date: Nov 2008 First Name: Tom Location: Inside your mind Posts: 203 Trading: (5)	Re: Project Cabinet Humidor (Pic Heavy) And then once the 6 coats of varnish were on (sanding in between each second coat) I installed the drawers I made a simple shelf and then installed the glass with one inch thick Spanish cedar and covered the whole rim in weatherstripping for a good seal. Not too bad for 2 weeks start to finish. I didn’t have time to sand this down as I took these pictures 4 hours before I had to be out the door for a flight back to school. One last pic is the initial master plan When I get back in May I am putting in dividers and humi beads. Needless to say I spent my cigar budget already! I Hope you like it as much as I do. Last edited by O-Danger; 01-06-2009 at 09:06 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode