9mm, 40 and 45 shell casing

boom · 03-28-2009, 07:01 PM

I am looking for a handful or so of brass shelling casing with primers already used left in place. I need these for a project for pipe smokers....I can pay postage or trade you a few sticks to compensate brass and postage.

Thanks in advance

Troy

s15driftking · 03-28-2009, 07:25 PM

hey brother,

I don't have any personally, but back about 3 years ago i was at an indoor range and they had garbage upon garbage cans full of smaller casings. give your local indoor range a call, they might even have larger ones.

Nabinger16 · 03-28-2009, 07:29 PM

I can hook you up. Shoot me a pm with your address and how many you need. Brass or nickle plated? I think I can do both in all three calibers.

03-28-2009, 07:37 PM

I can also help if you need some pm me your addy and I'll send you some. also got 38, 44 and 45lc if you need it. No compensation needed. Let me know how much you want and I'll get it to ya.

floydpink · 03-28-2009, 08:11 PM

The guys at the range I go to use snow shovels to clear all the casings out of the lanes, so I'm sure I could also grab some if you need....

boom · 03-28-2009, 08:23 PM

Thanks guys I tried my local range and they don't even allow reloads to be used and on top of that they recycle all their brass.

boom · 03-28-2009, 08:35 PM

This is done mods pls closer up......

boom · 04-09-2009, 08:24 PM

Well after a skyhigh340 hooked it up here is what I used them for... Made a Pipe Tamper out of a 45 shell and some nice two-tone Cocobolo.... Thanks

Savor the Stick · 04-09-2009, 08:43 PM

Nice!

alley00p · 04-09-2009, 08:49 PM

Quote:

Originally Posted by Savor the Stick

Nice!

If you need any size from .22 up to .44 and .45LC let me know!

taltos · 04-10-2009, 03:37 AM

I don't have any spare brass right now but you might like what you can do with some of the necked rifle cartridges such as 5.56 and 30-06.

03-28-2009, 07:01 PM	#1
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	9mm, 40 and 45 shell casing I am looking for a handful or so of brass shelling casing with primers already used left in place. I need these for a project for pipe smokers....I can pay postage or trade you a few sticks to compensate brass and postage. Thanks in advance Troy

03-28-2009, 07:25 PM	#2
s15driftking Go Browns! Join Date: Nov 2008 First Name: Bobby Location: Columbus Ohio Posts: 2,763 Trading: (16)	Re: 9mm, 40 and 45 shell casing hey brother, I don't have any personally, but back about 3 years ago i was at an indoor range and they had garbage upon garbage cans full of smaller casings. give your local indoor range a call, they might even have larger ones. __________________ diamonds/guns

03-28-2009, 07:29 PM	#3
Nabinger16 Drowning Ex Gorilla Join Date: Mar 2009 First Name: Trent Location: Indiana Posts: 292 Trading: (8)	Re: 9mm, 40 and 45 shell casing I can hook you up. Shoot me a pm with your address and how many you need. Brass or nickle plated? I think I can do both in all three calibers.

03-28-2009, 07:37 PM	#4
skyhigh340 Guest Posts: n/a	Re: 9mm, 40 and 45 shell casing I can also help if you need some pm me your addy and I'll send you some. also got 38, 44 and 45lc if you need it. No compensation needed. Let me know how much you want and I'll get it to ya.

03-28-2009, 08:11 PM	#5
floydpink crazy diamond Join Date: Oct 2008 First Name: Pete Location: Orlando Posts: 1,955 Trading: (17)	Re: 9mm, 40 and 45 shell casing The guys at the range I go to use snow shovels to clear all the casings out of the lanes, so I'm sure I could also grab some if you need.... __________________ "If we weren't all crazy we would go insane"

03-28-2009, 08:23 PM	#6
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	Re: 9mm, 40 and 45 shell casing Thanks guys I tried my local range and they don't even allow reloads to be used and on top of that they recycle all their brass.

03-28-2009, 08:35 PM	#7
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	Re: 9mm, 40 and 45 shell casing This is done mods pls closer up......

04-09-2009, 08:24 PM	#8
boom Central Cali Cigar Crew Join Date: Mar 2009 First Name: Troy Location: Cen Cal Posts: 1,659 Trading: (107)	Re: 9mm, 40 and 45 shell casing Well after a skyhigh340 hooked it up here is what I used them for... Made a Pipe Tamper out of a 45 shell and some nice two-tone Cocobolo.... Thanks

04-09-2009, 08:43 PM	#9
Savor the Stick ~Loves the Lord~ Join Date: Oct 2008 First Name: Kevin, or just K Location: Wichita Falls, Texas Posts: 1,945 Trading: (67)	Re: 9mm, 40 and 45 shell casing Nice! __________________ Pastor K Please Support the Troops

04-10-2009, 03:37 AM	#11
taltos Really, really old Join Date: Oct 2008 First Name: Paul Location: Saugus, MA Posts: 2,486 Trading: (3)	Re: 9mm, 40 and 45 shell casing I don't have any spare brass right now but you might like what you can do with some of the necked rifle cartridges such as 5.56 and 30-06. __________________ Jimmy, some of its magic, some of its tragic, but I had a good life all the way. He Went to Paris, J. Buffett