|
![]() |
#1 |
Life's too short Swishers
![]() |
![]()
Hey everyone, got my first humidor set up about 6 months ago and things had been going great. It's got a Heartfelt bead tube in it and the humidity always stayed around 65%. Over the last month of so I noticed the humidity ramping up and it finally got too high so I took out all my cigars, sealed everything with sealant, and am now re-seasoning.
I've got the hydrometer in a bag doing the salt test right now and it is reading 88%, way high. I tested it when I first set it up and calibrated it properly. What causes them to become un-calibrated? |
![]() |
![]() |
![]() |
#2 |
Life is for living
![]() |
![]()
I've noticed that mine stay accurate for around six months or so, then need the battery changed. So every six months I change the battery and re-calibrate them.
__________________
A 1911 in the hand is faster than 911 on the phone |
![]() |
![]() |
![]() |
#3 |
Feeling at Home
|
![]()
If you have an electronic hygrometer it works by reading the electrical resistance across a medium such as lithium chloride. As the batteries begin to degrade, the slight decrease in voltage will effect the resistance across the lithium chloride causing a false reading. By switching to lithium ion batteries you will reduce this need for calibration but not eliminate it altogether.
How this helped, BtW I spent 17 years in the field as an instrumentation tech, prior to moving into systems integration, and now management. I dig this stuff.
__________________
No function well beer without. |
![]() |
![]() |
![]() |
#4 |
Bunion
![]() |
![]()
Here is an interesting article about why thermometers and hydrometers need to be recalibrated. I would think that hygrometers would be similar. Stress on the medium over time plus fluctuations in the environment make a difference for small sensors.
http://www.icllabs.com/whyrecalibrate.html
__________________
I refuse to belong to any organization that would have me as a member. ~ Groucho Marx |
![]() |
![]() |
![]() |
#5 |
What's this button do?
|
![]()
I blame entropy. I use it as an excuse for a lot of things.
"Why is this garage such a mess?" "Entropy!"
__________________
![]() |
![]() |
![]() |
![]() |
#6 |
Feeling at Home
|
![]()
Entropy, it's not what it used to be.
__________________
No function well beer without. |
![]() |
![]() |
![]() |
#7 |
Dear Lord, Thank You.
![]() |
![]()
Nerd joke!!!
![]() ![]() ![]() I should add that I use "my hygrometer says something stupid" as battery changing time. Much like the smoke detector beeping. Rob explained it perfectly. I can add a little nugget to that... The Hygroset II's that most of us use have sticky crap on the board that reads the RH. Get a bead stuck on there and it'll read any kind of bizarro stuff it wants to. I regularly look in the grill and see if anything is stuck to the board. Most guys probably won't have that problem, but it happens. To me, it happens a lot.
__________________
Last edited by shilala; 07-14-2014 at 09:31 AM. |
![]() |
![]() |
![]() |
#8 |
Life's too short Swishers
![]() |
![]()
Awesome, thanks for all the advice guys. Looks like I'll let it finish re-seasoning, then put the sticks back in with the beads and a new battery.
|
![]() |
![]() |
![]() |
#9 |
Still Watching My Back
|
![]() |
![]() |
![]() |