Large Ring Gauge Punch Cutter

awsmith4 · 08-24-2010, 08:44 AM

This may have been covered before but I couldn't find it. My stepfather has expressed many times how he would like a larger punch. Mikhail (Brian) had sent me some .45 shell casings that are about the perfect size but with the brass being soft and my unskilled hands I could not create a sharp enough edge.

So does anyone know where to find larger punch cutters?

FYI - he smokes mostly 54-60 rg cigars

08-24-2010, 08:53 AM

We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

awsmith4 · 08-24-2010, 09:08 AM

Quote:

Originally Posted by Darrell

We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

Thanks brother, just let me know how much!

d'am · 08-24-2010, 03:38 PM

Quote:

Originally Posted by Darrell

We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

If it's publicly available, would you share the name with us? I'd love to find something that can punch a robusto once and open up a great draw.

SmokeyJoe · 08-24-2010, 03:43 PM

Quote:

Originally Posted by Darrell

We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

"So shines a good deed in a weary world."

I would bump your rep if I didn't have to spread some around first.

08-24-2010, 03:45 PM

Quote:

Originally Posted by d'am

If it's publicly available, would you share the name with us? I'd love to find something that can punch a robusto once and open up a great draw.

It does not have a name, it's some off brand. I'll gladly share the details when I have them.

Krish the Fish · 08-24-2010, 03:46 PM

Check out the Xikar Xi009 punch. It's a bigger punch than I've seen around, and it was sharp! Plus, xikar's warranty.

awsmith4 · 08-24-2010, 04:01 PM

Quote:

Originally Posted by Krish the Fish

Check out the Xikar Xi009 punch. It's a bigger punch than I've seen around, and it was sharp! Plus, xikar's warranty.

I saw it and I agree its big enough...for what I smoke. But when you smoke a steady diet of 6x60s I guess you want even larger.

JaKaacH · 08-25-2010, 09:07 PM

I have done two punches that overlap some. You end up with a figure eight looking hole.

NCRadioMan · 08-25-2010, 09:14 PM

Quote:

Originally Posted by Darrell

We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

Yeah, we have some of those too. Big suckers.

Should be exactly what you are looking for Albert.

boom · 08-25-2010, 09:41 PM

Quote:

Originally Posted by awsmith4

This may have been covered before but I couldn't find it. My stepfather has expressed many times how he would like a larger punch. Mikhail (Brian) had sent me some .45 shell casings that are about the perfect size but with the brass being soft and my unskilled hands I could not create a sharp enough edge.

So does anyone know where to find larger punch cutters?

FYI - he smokes mostly 54-60 rg cigars

I have sharpened the shell casing....my only worry is how long will it remain sharp.....

CasaDooley · 08-25-2010, 10:10 PM

This is the biggest punch I have found at 12mm and after more then 5 years it is still extremely sharp.
http://www.vintagechiccigar.com/index.php?cPath=129_456

SvilleKid · 08-25-2010, 10:23 PM

I've never made a punch from a .45, but have half a dozen from .270 and .30-06 rifle rounds. I found that these work best when the edge is well sharpened, but which still leaves a slightly saw-toothed edge. The secret to using them in this state is to gently rotate the punch back and forth, verses using as a pure punch. This consistently produces a clean cut for me, never had one tear the wrapper. I have a set of cheap jeweler files that allow me to sharpen the inside edge once I get the outside edge to the shape/sharpness I want. You are right that you will never get the soft brass sharp enough to use as a punch. But modifying your punch technique to what basically amounts to a hole saw style should give you desirable results. The longer rifle casings do make it easier to twirl the casing back and forth than with shorter pistol rounds. I also find that punching the primer out can give you a good route to push the plugs back out. Then, buff the casing to a luster, and clear-coat with clear Krylon. Keeps the casing from tarnishing.

If you want, PM me for my addy, send me a few spent casings, and I'll try my hand at making some up for you.

NCRadioMan · 08-25-2010, 10:41 PM

Quote:

Originally Posted by CasaDooley

This is the biggest punch I have found at 12mm and after more then 5 years it is still extremely sharp.
http://www.vintagechiccigar.com/index.php?cPath=129_456

That's the one! Solingen steel will keep an edge for a long time.

awsmith4 · 08-26-2010, 09:12 AM

Thanks for all the info guys! At $6 I'll probably order him a few.

And Cliff, next time I go to the range I'll take my rifle too and send you some casings. I'll PM you when I get a chance to go, thanks for the offer!

08-26-2010, 04:26 PM

If you know anyone who reloads their own ammunition, they probably have a case reamer to clean burrs from the mouth of the cases prior to reloading, especially after trimming the length of rifle cases. I've never tried it but I think, with a little patience, you could use such a reamer to sharpen that .45 case for that purpose.

08-31-2010, 02:10 PM

That is the punch we HAD in stock.

I meant to update last week that we were out.

Sorry.

awsmith4 · 10-06-2010, 06:25 AM

Quote:

Originally Posted by CasaDooley

This is the biggest punch I have found at 12mm and after more then 5 years it is still extremely sharp.
http://www.vintagechiccigar.com/index.php?cPath=129_456

Quote:

Originally Posted by Darrell

That is the punch we HAD in stock.

I meant to update last week that we were out.

Sorry.

Well it looks like now a lot of folks are out of stock, I screwed around and didn't order one now I can't find one.

Anyone know another source for them???

Don Fernando · 10-06-2010, 07:18 AM

I have a punch with 2 different sizes, I'll bring it to EPIC Albert, if you like it, it's yours

McSmokey · 10-06-2010, 08:46 AM

I don't know what the size of the other punch was (didn't see it before the website said none available), but this one punches a 28RG hole in the cigar.

http://www.cigarextras.com/xikarstai...forcigars.aspx

08-24-2010, 08:44 AM	#1
awsmith4 Simple Pleasures - 2oL Join Date: Oct 2008 First Name: Albert Location: Marietta, Georgia Posts: 4,602 Trading: (111)	Large Ring Gauge Punch Cutter This may have been covered before but I couldn't find it. My stepfather has expressed many times how he would like a larger punch. Mikhail (Brian) had sent me some .45 shell casings that are about the perfect size but with the brass being soft and my unskilled hands I could not create a sharp enough edge. So does anyone know where to find larger punch cutters? FYI - he smokes mostly 54-60 rg cigars __________________ Its THIS easy to support our troops Last edited by awsmith4; 08-24-2010 at 08:50 AM.

08-24-2010, 08:53 AM	#2
Darrell Guest Posts: n/a	Re: Large Ring Gauge Punch Cutter We have a BIG one at our shop. I'll check about them on Thursday and I can drop one in the mail for you. I think it's designed for about a 55.

08-24-2010, 03:46 PM	#7
Krish the Fish Still Watching My Back Join Date: Jul 2010 First Name: Krishna Location: Columbus, OH Posts: 164 Trading: (2)	Re: Large Ring Gauge Punch Cutter Check out the Xikar Xi009 punch. It's a bigger punch than I've seen around, and it was sharp! Plus, xikar's warranty.

08-25-2010, 09:07 PM	#9
JaKaacH ROCK Chalk JAYHAWK K U Join Date: Oct 2008 First Name: Jeff Location: Living in the golden age of ignorance in power. Posts: 1,363 Trading: (32)	Re: Large Ring Gauge Punch Cutter I have done two punches that overlap some. You end up with a figure eight looking hole. __________________ --Anger Management Graduate-- WHAT the F^#% you looking at???

08-25-2010, 10:10 PM	#12
CasaDooley Herf Crew of 2 Join Date: Oct 2008 First Name: Kevin Location: The birthplace of Fathers Day Posts: 2,465 Trading: (41)	Re: Large Ring Gauge Punch Cutter This is the biggest punch I have found at 12mm and after more then 5 years it is still extremely sharp. http://www.vintagechiccigar.com/index.php?cPath=129_456 __________________ *Founding member of the Lilac City Dedicated Herfers*

08-25-2010, 10:23 PM	#13
SvilleKid Yes I am a Pirate Join Date: Oct 2008 Location: 33°46′08″N 86°28′16″W / 33.76895°N 86.471037°W Posts: 2,776 Trading: (52)	Re: Large Ring Gauge Punch Cutter I've never made a punch from a .45, but have half a dozen from .270 and .30-06 rifle rounds. I found that these work best when the edge is well sharpened, but which still leaves a slightly saw-toothed edge. The secret to using them in this state is to gently rotate the punch back and forth, verses using as a pure punch. This consistently produces a clean cut for me, never had one tear the wrapper. I have a set of cheap jeweler files that allow me to sharpen the inside edge once I get the outside edge to the shape/sharpness I want. You are right that you will never get the soft brass sharp enough to use as a punch. But modifying your punch technique to what basically amounts to a hole saw style should give you desirable results. The longer rifle casings do make it easier to twirl the casing back and forth than with shorter pistol rounds. I also find that punching the primer out can give you a good route to push the plugs back out. Then, buff the casing to a luster, and clear-coat with clear Krylon. Keeps the casing from tarnishing. If you want, PM me for my addy, send me a few spent casings, and I'll try my hand at making some up for you. __________________ Ceilin' fan it stirs the air, Cigar smoke does swirl. The fragrance on the pillow case, and he thinks about the girl. Thanks, JB, 1975.

08-26-2010, 09:12 AM	#15
awsmith4 Simple Pleasures - 2oL Join Date: Oct 2008 First Name: Albert Location: Marietta, Georgia Posts: 4,602 Trading: (111)	Re: Large Ring Gauge Punch Cutter Thanks for all the info guys! At $6 I'll probably order him a few. And Cliff, next time I go to the range I'll take my rifle too and send you some casings. I'll PM you when I get a chance to go, thanks for the offer! __________________ Its THIS easy to support our troops

08-26-2010, 04:26 PM	#16
lawman Guest Posts: n/a	Re: Large Ring Gauge Punch Cutter If you know anyone who reloads their own ammunition, they probably have a case reamer to clean burrs from the mouth of the cases prior to reloading, especially after trimming the length of rifle cases. I've never tried it but I think, with a little patience, you could use such a reamer to sharpen that .45 case for that purpose.

08-31-2010, 02:10 PM	#17
Darrell Guest Posts: n/a	Re: Large Ring Gauge Punch Cutter That is the punch we HAD in stock. I meant to update last week that we were out. Sorry.

10-06-2010, 07:18 AM	#19
Don Fernando Postwhore Join Date: Oct 2008 First Name: Ferdinand Location: Singapore Posts: 10,070 Trading: (29)	Re: Large Ring Gauge Punch Cutter I have a punch with 2 different sizes, I'll bring it to EPIC Albert, if you like it, it's yours __________________ check out my reviews on my blog.

10-06-2010, 08:46 AM	#20
McSmokey Feeling at Home Join Date: Aug 2009 First Name: Justin Location: Tuscaloosa, AL Posts: 948 Trading: (30)	Re: Large Ring Gauge Punch Cutter I don't know what the size of the other punch was (didn't see it before the website said none available), but this one punches a 28RG hole in the cigar. http://www.cigarextras.com/xikarstai...forcigars.aspx __________________ "Although personally I am quite content with existing explosives, I feel we must not stand in the path of improvement." Winston Churchill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode