[N2Advnture]

Calibrating a Hygrometer:

Since the hygrometer is our only visual indicator for what the exact RH level is inside the humidor, I recommend calibrating your digital hygrometer twice a year and replacing the battery annually (weak batteries can give a false reading as well).


How to Test and Calibrate a Hygrometer:
1. Fill a small container with salt (milk bottle cap or ketchup cup works well).

2. Add a few drops of distilled water. NOT enough to dissolve the salt, just enough to moisten it. You want the mixture to be thick and pasty.

3. Put the cap inside of an air tight zip lock bag or plastic container along with your hygrometer. Then seal the bag or container. (Tupperware works well).

4. Wait 24 hours, then check the reading on your hygrometer without opening the bag or container (or quickly open the container and check if the container is not clear).

If the reading is 75%, then your hygrometer is accurate and no adjustment is required.

If the reading is not precisely 75%, then you will just have to remember to add or subtract the difference between the test reading and 75%, in order to determine the actual humidity level inside of your humidor.

For example, if your hygrometer test reading was 80%, then subtract 5% from the readings you get when the hygrometer is inside of your humidor to determine the actual levels of humidity. (e.g. a reading of 70% inside your humidor equals an actual humidity level of 65%).

Writing the +/- percentage on a piece of tape or small post it note and affixing it to the hygrometer works well.

I hope this helps and happy smoking!

~Mark

.