Quote:
Originally Posted by fxpose
Good point about too much smoke escaping. I guess under cold, windy conditions this could be a major factor....as far as keeping the temp constant.
I plan on installing a small temp gauge on the lid.
But as far as the heating element is concerned, my unit remains 'on' as long as it's plugged in. I place a cast iron chip box with a mixture of chips and chunks over the heating element. It produces smoke for about 3 hours.
|
My thermostat has low-med-high settings. Once it hits a certain temp it will shut off until it needs to come back on again. I stopped using the Cast iron plate. It needed too high of a temp to get the chips smoldering. I, now put handfulls of the damp chips directly on the heating element. Smokes at a much lower temp. I usually run it around 195-200 deg.