View Single Post
Old 06-08-2010, 03:17 PM   #19
T.G
Grrrrrr
 
T.G's Avatar
16
 
Join Date: Mar 2009
First Name: The Other Adam
Posts: 15,544
Trading: (37)
Navy (Served With Honor)
T.G has disabled reputation
Default Re: Autofilling Humi for Walk In

Quote:
Originally Posted by wolfandwhisky View Post
Thanks Bob - great info.

You actually touched on a question I was thinking of posting - why not use a filtration system as opposed to R/O or distillation? I'm thinking along the lines of Britta, etc.

You mention a drain - do R/O and/or distillation systems need a drain? I figured there would just be some type of part or filter that would occasionally be replaced. There is a drain in an adjacent room, but I doubt it would be practical to run a line to it. I could just punch a hole in the exterior wall and let the water out that way, though.
Filters alone just won't cut it, they leave all kinds of crap behind.

Some RO's need drains and pretty much all distillers need drains.

Distillers don't boil the water all the way down when they make steam, they are left with a brine full of heavy solids and "crap" in the boiling vessel that must be disposed of. Boiling all the way down and not flushing the vessel would eventually ruin the unit due to scaling. Some RO systems use a high-pressure backflush to extend filter and membrane life, when backflushing, the contaminated discharge needs to be disposed of.
T.G is offline   Reply With Quote