Quote:
Originally Posted by RGD.
I'm not familiar with the loads in your area - but normally 2x6's on 24oc should not be a problem as long as they are framed correctly and the proper wood is used such as Southern Pine no. 1 and not a Spruce/Pine.
Are you working from plans?
Have you considered using trusses? Initial cost may be more but they save in the installation. Most lumber yards have stock sizes ready to deliver.
Ron
|
I would go to your local permit office and ask them what the local code is (and buy a building permit if you need one). 24" seems to be ok but
deffinately use Pine! Spruce is too week. I also 2nd the idea of premade trusses. They are a little more cost wise, but so much easier just to get a few guys to walk them up, then secure them!!
I would go check what the local code says. Then if a building inspector comes out to check the work, you won't have to tear anything down or apart. Get a permit (if needed in your area) and do it right (for your area) and you shouldn't have any regrets.