Quote:
Originally Posted by Volt
Whoops, yep I got distracted with the caps and my past experience with the GX260s/GX270's, completely missed the level workstation. Did a run on a cheap Precision T3500 64bit with a small RAID 5, $1,700.
Depending on the age of the machine, the reliability required and when it needs to be back up, it may be new server is required. If the piggy says no $$$, maybe buy the kit and and install it. I would wager a years' worth of cigars though, unless it's done by someone who has 2M skills and a 2M workstation, it will be an expensive failure. Those caps are a tight fit and power caps have to be done right.
|
All these capacitors have leads. They're not SMT. Just seat them flush and even to the PCB.
I've done cap swaps on motherboards and PSU's with no ill-effects whatsoever.
As long as a person cleans the through-holes cleanly with a solder sucker or wick(just be careful not to stray to other components), properly applies some flux to not burn out the components, double checks for no cold joints, and uses a soldering iron proper for the job. IE nothing over 50W with a fine tip. This should be easy as cake.