Lighter issues
 

I need the wisdom of this forum. My lighter wont fill with butane. When I hook the nozzle to it it just shoots all over the place almost like its blocked. This has never happened before so I'm at a loss. Any ideas?

Re: Lighter issues
 

Have you tried pushing down on the fill valve?
Does it push down?

Re: Lighter issues
 

What kind of lighter?

Re: Lighter issues
 

Vector lighter and yes the valve will push down. It just wont take the fuel.

Re: Lighter issues
 

My Vector lighters need an adapter to fill properly... Most cans (except Colibri) include plastic adaptors.

Re: Lighter issues
 

Have you bleed the lighter??? If its full if air, it wont take fuel.

Re: Lighter issues
 

I've bleed the lighter yes and I have used the adapter. It seems like a little bit will go int but then it comes right back out

Re: Lighter issues
 

Try putting your lighter in the freezer for 10-15 minutes prior to filling. The cold lighter will help draw in the butane. Also make sure you do not shake the can before filling.:tu

Re: Lighter issues
 

Will try that. thanks guys

Re: Lighter issues
 

If you can't figure it out send me your APO and I'll send a Ronson or two. Can't have you out protecting us without a lighter

Re: Lighter issues
 

No go on the freezer trick. Froze my finger however haha. Sad day I loved that lighter, I cant even explain whats happening with it at this point. Its just shooting all over the place. Albert check your PMs. Thank you for all the support.

Re: Lighter issues
 

KENNETH, you DO know you can let go of the lighter, right?? You don't have to HOLD onto it in the freezer.

Dang Boston people...

Re: Lighter issues
 

KENNETH, you DO know you can let go of the lighter, right?? You don't have to HOLD onto it in the freezer.

Dang Red Sox fans...

Re: Lighter issues
 

Haha the freezer wasnt what froze it. It was the butane spraying out and cold lighter combo.

Re: Lighter issues
 

:)

Here is a lighter you can get for the cost of a box of cigars....

http://www.jrcigars.com/jr/index.cfm...-Lighter-.html

http://www.jrcigars.com/jr/index.cfm...-Lighter-.html

http://www.jrcigars.com/jr/index.cfm...hter-FREE-.htm

http://www.jrcigars.com/jr/index.cfm...TER-COMBO.html

http://www.jrcigars.com/jr/index.cfm...TER-COMBO.html

Re: Lighter issues
 

Or you can order these for under $2 each if you order 3 or more.

http://www.dealextreme.com/p/compact...t-lighter-4179

Re: Lighter issues
 

Thanks for the input guys. Albert was awesome enough to pic up 2 ronsons for me so those should last a while hopefully.

Re: Lighter issues
 

Have you tried filling from a different can of butane?

I've had nozzles on the cans get damaged and as a result they either won't seal well enough to the fill valve on the lighter to force the butane in or fit well enough to depress the fill valve on the lighter to allow butane in. Depending on how badly the nozzle on the can is expanded, fill adapters sometimes won't even help.

Re: Lighter issues
 

I only have this one can so I cant even check but its the same stuff I'm using back home. (Xikar)