Wrapper Issues
 

I have a few sticks that I had won as part of being a reviewer for Smoke Magazine that the wrappers are just plain brittle. During the winter my RH in the humi is 61 - 62%. There are no leaks in the humi (did the light test). Other sticks are just fine. On the problem sticks, I cut the cap and the wrapper splits right by the head. I am using a brand new Palio to cut them with. Could these be just inferior sticks? Bad wrapper?

Any ideas?

Re: Wrapper Issues
 

Sounds like those got underhumidified for some reason. Perhaps were already drying up when you got them..
Maybe I am spoiled but when a cigar does what you have described, there is no way I will enjoy it and so I chuck it and move on. I hate a brittle cigar. The taste and experience does not do it for me.

Re: Wrapper Issues
 

some wrappers are thinner than others. Check out the thread on wetting your cigar for possibilities.

Re: Wrapper Issues
 

I would guess the wrappers are a bit too dry.

I will sometimes wet the head of the cigar before cutting if it feels like it may splinter and it has worked for me.

Other than that I really don't know what the problem could be...

http://img.photobucket.com/albums/v4...cons/dunno.gif

Re: Wrapper Issues
 

I like to moisten the cap on any stick I am getting ready to have, and let it sit for a minute before cutting or punching. I do this this to every-one regardless of weather I think its brittle or not. I have not had a cap split in a long long time. Give it a try.

Re: Wrapper Issues
 

I will thanks. I will also try the wetting as well. I am curious as how it will change the flavor profile.

Re: Wrapper Issues
 

What do you mean wetting?

Re: Wrapper Issues
 

Sounds like typical cameroon wrappers to me.
:2

Re: Wrapper Issues
 

Re: Wrapper Issues
 

Here's what works for me in the dry winter air:
1. Wet the cap (I usually just put the uncut cigar in my mouth for a minute or two)
2. Put your cutter on the cigar as normal, but only close it enough to crease the wrapper slightly. Twist the cutter around the cigar like you would do with a pipe cutter. Usually a half turn will be fine to sever the cap.
3. Complete the cut while applying slight pressure towards the foot of the cigar. This prevents the dreaded ridge.
4. :ss
Posted via Mobile Device

Re: Wrapper Issues
 

That is great advice Jeff. Thanks. Like I said, it isn't on all the cigars just a few. They aren't cameroons, I am pretty sure. I think they were stored too dry prior to me getting them and there are no oils left in the wrappers.

Re: Wrapper Issues
 

Interesting read, thanks!

Re: Wrapper Issues
 

+1!!
I have been doing the wetting thing on all my cigars, but nver did the twist before, it sounds like a great idea.