Cigar Asylum Cigar Forum

Cigar Asylum Cigar Forum (http://www.cigarasylum.com/vb/index.php)
-   General Discussion (http://www.cigarasylum.com/vb/forumdisplay.php?f=48)
-   -   Need a 40x40x10 3.3v 2 wire fan (http://www.cigarasylum.com/vb/showthread.php?t=19703)

kaelaria 08-07-2009 11:15 PM

Need a 40x40x10 3.3v 2 wire fan
 
I'm having a little trouble finding a 40x40x10mm 3.3v 2 wire fan anywhere - does anyone have a source?

Thanks!

Rabidsquirrel 08-08-2009 08:35 AM

Re: Need a 40x40x10 3.3v 2 wire fan
 
Is this for a laptop?

BORIStheBLADE 08-08-2009 08:47 AM

Re: Need a 40x40x10 3.3v 2 wire fan
 
The lowest I can find is a 5volt. What do you need it for?

kaelaria 08-08-2009 11:56 AM

Re: Need a 40x40x10 3.3v 2 wire fan
 
It's actually for a studio light, the original fan wore out.

Rabidsquirrel 08-08-2009 02:02 PM

Re: Need a 40x40x10 3.3v 2 wire fan
 
Your best bet may be getting the 5v fan and putting a resistor on it.

kaelaria 08-08-2009 02:03 PM

Re: Need a 40x40x10 3.3v 2 wire fan
 
I already have a 5v fan and it won't spin up, as it needs more voltage - how would a resistor work?

Rabidsquirrel 08-09-2009 10:24 AM

Re: Need a 40x40x10 3.3v 2 wire fan
 
You can use it to drop down the voltage. Give us the current rating on the 5v fan you have, and we can calculate what resistor you would need.

kaelaria 08-09-2009 10:29 AM

Re: Need a 40x40x10 3.3v 2 wire fan
 
The point is I didn't need to drop, I needed more.

The situation has changed though - somehow I misread the voltage from the rail and it's actually putting out 16v. I have NO idea how I read 3.2 before.

Anyway, I put in a 7805 voltage regulator that brought it down to 5v, but the fan still doesn't spin up for some reason, not sure why. It just jumps for a moment. I tried a larger 12v fan and it spins fine, so I'm just going to stop in at compusa and get a smaller 12v fan to fit.

The 5v fan tested ok, it spins on AA cells fine.


All times are GMT -6. The time now is 09:11 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.