Cigar Asylum Cigar Forum

Cigar Asylum Cigar Forum (http://www.cigarasylum.com/vb/index.php)
-   Accessory Discussion / Reviews (http://www.cigarasylum.com/vb/forumdisplay.php?f=14)
-   -   Blazer Torch (http://www.cigarasylum.com/vb/showthread.php?t=52914)

ChicagoWhiteSox 01-27-2012 09:07 AM

Blazer Torch
 
How many people have these? I'm wondering how the fuel tank will last before refill, how the flame holds up in wind, and the overall quality of the lighter. Are there better options for a new torch in the $30-40 range? Thanks

icehog3 01-27-2012 09:22 AM

Re: Blazer Torch
 
I loved my PB-207, finally crapped out after about 5 1/2 years. Lit 100 cigars on one fill, Nate. I will be picking up another next time I see a sale or GB.

Blak Smyth 01-27-2012 09:29 AM

Re: Blazer Torch
 
I am not trying to talk you out of it (I have never used the Blazer), but I use these and they work great and have great lasting tanks and are very cheap to purchase:

http://www.dealextreme.com/p/translu...-lighter-12142
http://img.dxcdn.com/productimages/sku_12142_1.jpg

http://www.dealextreme.com/p/honest-...-lighter-11868
http://img.dxcdn.com/productimages/sku_11868_1.jpg

icehog3 01-27-2012 09:31 AM

Re: Blazer Torch
 
Quote:

Originally Posted by Blak Smyth (Post 1542225)
I am not trying to talk you out of it, but I use these and they work great and have great lasting tanks and are very cheap to purchase:

http://www.dealextreme.com/p/translu...-lighter-12142

They are good lighters, I got 6 of another style for less than $15 shipped, so you don't even care if you lose one, or want to just give a couple away.

awsmith4 01-27-2012 09:39 AM

Re: Blazer Torch
 
I have a ton of cheap lighters that are great, but I always try to have my Blazer PB-207 on hand. It has a strong flame and, like Tom said, it will light lots of cigars between refills. First one I had was solid color but the clear is the way to go so you can see how much fuel is left. My other two recomendations are the Blazer Little Buddy and the Xikar New Tech. I have not used the New Tech outside of the store but it is very similar to the Little Buddy, which is great, and it has Xikar's warranty.

Blak Smyth 01-27-2012 09:42 AM

Re: Blazer Torch
 
Quote:

Originally Posted by icehog3 (Post 1542227)
They are good lighters, I got 6 of another style for less than $15 shipped, so you don't even care if you lose one, or want to just give a couple away.

Exactly, the second one fits into a pocket a little better but they both work great. And at the price point:tu

I bought about 6 different ones, but I liked these two the best all around.

ChicagoWhiteSox 01-27-2012 09:51 AM

Re: Blazer Torch
 
Thanks guys. I'm looking at the PB-207 clear tank. Sounds like it has a strong flame (I smoke mostly outside), and good fuel capacity. Does the chain that holds the cover on bother anyone? I could see how it may be an issue in the pocket..

Blak Smyth 01-27-2012 09:53 AM

Re: Blazer Torch
 
Quote:

Originally Posted by ChicagoWhiteSox (Post 1542252)
Thanks guys. I'm looking at the PB-207 clear tank. Sounds like it has a strong flame (I smoke mostly outside), and good fuel capacity. Does the chain that holds the cover on bother anyone? I could see how it may be an issue in the pocket..

I often remove them on my cheap ones. They do annoy me.

ChicagoWhiteSox 01-27-2012 10:04 AM

Re: Blazer Torch
 
Anyone have the Little Buddy or Ambassador?

crazyirishman 01-27-2012 10:09 AM

Re: Blazer Torch
 
Quote:

Originally Posted by icehog3 (Post 1542227)
They are good lighters, I got 6 of another style for less than $15 shipped, so you don't even care if you lose one, or want to just give a couple away.

that's good that people think highly of those. I'm gonna have to pick some up since it takes away the stress of trying to find a potentially misplaced lighter when I want to light up a stick but don't want to have to look for a light.

CigarNut 01-27-2012 11:27 AM

Re: Blazer Torch
 
Quote:

Originally Posted by icehog3 (Post 1542214)
I loved my PB-207, finally crapped out after about 5 1/2 years. Lit 100 cigars on one fill, Nate. I will be picking up another next time I see a sale or GB.

Quote:

Originally Posted by awsmith4 (Post 1542235)
I have a ton of cheap lighters that are great, but I always try to have my Blazer PB-207 on hand. It has a strong flame and, like Tom said, it will light lots of cigars between refills. First one I had was solid color but the clear is the way to go so you can see how much fuel is left. My other two recomendations are the Blazer Little Buddy and the Xikar New Tech. I have not used the New Tech outside of the store but it is very similar to the Little Buddy, which is great, and it has Xikar's warranty.

Love my Blazer PB-207 -- it has held up longer and better than all my other more expensive lighters.

The one advantage of the Blazer of the Dealextreme lighter is that the piece around the flame is metal on the Blazer so there is no risk if you leave the lighter on longer.

Blak Smyth 01-27-2012 11:33 AM

Re: Blazer Torch
 
Quote:

Originally Posted by CigarNut (Post 1542383)
Love my Blazer PB-207 -- it has held up longer and better than all my other more expensive lighters.

The one advantage of the Blazer of the Dealextreme lighter is that the piece around the flame is metal on the Blazer so there is no risk if you leave the lighter on longer.

I am sure the Blazer has a slight edge but maybe not for the price point.

The piece around the metal?
Isn't the top plastic with metal inside on the blazer? The two lighters I posted above are both metal?:confused:
http://cn1.kaboodle.com/img/b/0/0/17...=1312647858000

Here is another one more similar to the Blazer style that I have:
http://img.dxcdn.com/productimages/sku_6783_1.jpg
I also have this one:
http://img.dxcdn.com/productimages/sku_4179_1.jpg

All of the cheap ones work great. I almost want to buy a Blazer just to do a review comparison.

Coop 01-27-2012 12:10 PM

Re: Blazer Torch
 
I was just thinking I need a cheap jet flame lighter and this thread pops up!!!

CigarNut 01-27-2012 01:12 PM

Re: Blazer Torch
 
The peice around where the flame comes out -- I am not refering to the exterior surface of the lighter. On the Blazer it is metal. I've been told that it's not metal on the Dealextreme lighters...

BTW, I could be wrong about the Dealextreme -- and it would not be the first time...

Blak Smyth 01-27-2012 01:13 PM

Re: Blazer Torch
 
Quote:

Originally Posted by CigarNut (Post 1542463)
The peice around where the flame comes out -- I am not refering to the exterior surface of the lighter. On the Blazer it is metal. I've been told that it's not metal on the Dealextreme lighters...

BTW, I could be wrong about the Dealextreme -- and it would not be the first time...

I will check and get back to you, are you talking about the visible part around the flame or something internal?

Ashcan Bill 01-27-2012 01:35 PM

Re: Blazer Torch
 
I have three PB-207s that I've had between five and three years now. Of the three, one has always been temperamental. The other two are bulletproof.

But having said that, I also have a drawer full of various DX lighters that work just as good, just as long, and for about a tenth of the price of a Blazer.

I use them all.

T.G 01-27-2012 02:04 PM

Re: Blazer Torch
 
Quote:

Originally Posted by CigarNut (Post 1542463)
The peice around where the flame comes out -- I am not refering to the exterior surface of the lighter. On the Blazer it is metal. I've been told that it's not metal on the Dealextreme lighters...

BTW, I could be wrong about the Dealextreme -- and it would not be the first time...

Not sure if this is what you are referring to, but the nozzles are brass and the "cup" that they sit in looks to be ceramic. If it were metal, the spark from the ignitor would ground out on the cup rather than the burner.

IIRC, it is heavier/thicker and more precisely manufactured and placed on the PB-207.

I can check on this later when I get home and can look at my PB-207 and a few other brands, including the DX, side by side.

One thing I don't like about the PB-207 is the roll-forward safety, but a pair of diagonal cutters will fix that in a second.

awsmith4 01-28-2012 09:47 AM

Re: Blazer Torch
 
Quote:

Originally Posted by ChicagoWhiteSox (Post 1542274)
Anyone have the Little Buddy or Ambassador?

Yes I had a Little Buddy and loved it...then it was left in a pants pockets and melted in the dryer :(

I definitely liked the flip top better than the chain but it seemed that the tank wasn't the same capacity as the PB-207. The flame was strong but I again the 207 seemed stronger but it still had a great flame even in windy conditions. I have never tried an Ambassador.t Joey (ir13) swears by the CG-001 which seems to be the PB-207 in a hard case

http://www.blazerproducts.com/lighte....php?prodId=36

ChicagoWhiteSox 01-28-2012 10:01 AM

Re: Blazer Torch
 
Quote:

Originally Posted by awsmith4 (Post 1543157)
Yes I had a Little Buddy and loved it...then it was left in a pants pockets and melted in the dryer :(

I definitely liked the flip top better than the chain but it seemed that the tank wasn't the same capacity as the PB-207. The flame was strong but I again the 207 seemed stronger but it still had a great flame even in windy conditions. I have never tried an Ambassador.t Joey (ir13) swears by the CG-001 which seems to be the PB-207 in a hard case
http://www.blazerproducts.com/lighte....php?prodId=36

I wonder if it is just the PB-207 in a hard case.. If so, I like that better than having a chain on the PB-207.

ChicagoWhiteSox 01-28-2012 11:00 AM

Re: Blazer Torch
 
Quote:

Originally Posted by T.G (Post 1542516)
Not sure if this is what you are referring to, but the nozzles are brass and the "cup" that they sit in looks to be ceramic. If it were metal, the spark from the ignitor would ground out on the cup rather than the burner.

IIRC, it is heavier/thicker and more precisely manufactured and placed on the PB-207.

I can check on this later when I get home and can look at my PB-207 and a few other brands, including the DX, side by side.

One thing I don't like about the PB-207 is the roll-forward safety, but a pair of diagonal cutters will fix that in a second.

Is the roll-forward safety the same in this video?
http://www.youtube.com/watch?v=sTo9Kno1xSA


All times are GMT -6. The time now is 12:46 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.