What kind of cutter/punch do you use?
 

I've searched through the Accessory threads for discussions on cutters and ones on Xikar vs Palio or using punches. I think there was even a thread about using knives to remove the caps.

So here is the question stated another way: How do you prep the end of your cigar?
And the follow questions: Do you prefer a particular brand name tool or have you found a generic one that works? Do you prefer cutter or punch or V notch or pocket knife?


I'll start. My first cutter was just a generic cheapie one and it worked pretty well. I bought a Cigar Star one online and it was useless. The blades were loose and dull. Finally I received a Palio from SilverFox in my first NST. It has always worked perfectly for me. I haven't had the opportunity to try any others.

I have used a punch on a few occasions, but generally prefer a cut. I have had to use a knife once or twice, but still prefer a cutter.

I have never used a V Notch or scissors.

Re: What kind of cutter/punch do you use?
 

I prefer to punch, otherwise I cut with the Palio that Mark (Conch Republican) gifted me.

Re: What kind of cutter/punch do you use?
 

I used to punch all my sticks. Now I use my Palio and clip it!! :tu

Re: What kind of cutter/punch do you use?
 

Why? Just curious.

Re: What kind of cutter/punch do you use?
 

I prefer a punch as well when the cigar is within the "right" ring guage zone for me, otherwise I'll cut it with a double-blade guillotine.

I currently use a cheapo $2 punch that's easily replaced and also a $3 cheapo guillotine. The problem is that, though easily replaced, they are OFTEN replaced. :r I'll be getting a better quality punch and cutter ASAP.

I prefer the punch cut because in my opinion it preserves the integrity of the structure of the cap and head of the cigar more than any other cut. The problems I've run into are that too small RG cigars are difficult to punch, too large RG cigars won't smoke as well (for me) when punched, and cigars with delicate, fragile or dry wrappers crack to hell and gone when my paws get a hold of them and try to punch. In all those cases I'll use the cutter instead.

Re: What kind of cutter/punch do you use?
 

I started with a cheap guillotine, then bought a Xikar and then a Palio.
I also tried a punch once when I first started with cigars but had difficulty with the draw and have been using either the Xikar or Palio exclusively.
I recently tried (an inexpensive) punch again and now use it on occasion when I am smoking something other than a torpedo, which are my favorite vitola.

Re: What kind of cutter/punch do you use?
 

Cool. Thanks for the info.:tu

Re: What kind of cutter/punch do you use?
 

Ditto on the punch. I received the one I currently use from Smokin Gator through the NST II. My first cutter was a cheap plastic Macanudo single blade which worked but sucked. My next was a double guillotine ss cutter from China via Ebay that cost like $3 but works great. I am currently using a fiberglass xicar cutter that I got free with a fiver from Monster. The xicar is great. Haven't tried a Palio but I think I'd like to get one in the future.

By the way, I've seen one person use there teeth with some success.

Re: What kind of cutter/punch do you use?
 

Hm.. I have a punch for smaller cigars or sometimes cheaper cigars that don't hold up to cutting as well. Also, I keep the punch with me, so if I find myself smoking a cigar when I wasn't planing to, I'm set.

As for cutters, I have a few cheap metal ones. They seem to work well. I've never tried a Palio. How much are they? Are they worth extra cash?

Re: What kind of cutter/punch do you use?
 

I punch with the bottom of my Xikar Element or if its a torp the Xi1. I prefer the punch seems to stay cleaner and find to get a bit more flavor or maybe that's just in my head, but that's what I do.

Re: What kind of cutter/punch do you use?
 

It's harder for me to **** up the cap with a punch then with a cutter :) I also get less tobacco in my mouth and the cigar won't unravel on me.

Re: What kind of cutter/punch do you use?
 

If it's something with a tightly rolled pigtail like the Kristoffs, I'll just bite it off. Otherwise, it's my Palio. I think I paid just under $50 for mine, but they also have a lifetime warranty. I had an issue with the tabs on the rails jamming, and Palio replaced it. So now I'm thinking of getting another one to replace the cheapie Wolf cutter I carry in my golf bag.
Posted via Mobile Device

Re: What kind of cutter/punch do you use?
 

I have cheapies of both a double blade cutter and a punch. I pick which one to use depending on the cigar cap. If I have issues with my cheapies I may look at something better but until then they work for now.
Posted via Mobile Device

Re: What kind of cutter/punch do you use?
 

My first choice is my Palio cutter, damn I love that cutter, than comes my Wolf V-Cutter and than my punch (54 and above cigars).

Re: What kind of cutter/punch do you use?
 

I have tried pretty much every cutter out there and now that my stash of Havana Cigar Cutters has run dry (my previous favorite) I use a Cuban Crafters Perfect Cigar Cutter.
For me the Cuban Crafters cutter at $15.00 is a steal! Great clean cut, heavy duty construction, lifetime warranty.

Re: What kind of cutter/punch do you use?
 

I started by using a razor blade, while I waited for my Xikar to be sent.

I used that for a while then Navydoc sent me a Palio cutter and brother I love that cutter.

I see what you guys are saying about a punch and I think I will have to try that out some day. But for now I am all about my Palio!

Re: What kind of cutter/punch do you use?
 

SilverFox turned me on to using a Kershaw Onion assisted opening knife to slice off the a smidgen of the cap. If I don't go that way, I use my Xikar.

Re: What kind of cutter/punch do you use?
 

In the past I used a knife point to cut a hole in the cap kind of the way a punch would. Today I tried using the blade of a belt knife I have. I rolled the cap over the blade to get through the wrapped, then was able to slice through the binder/filler. It worked pretty good but requires a sharp knife. I think this could also present problems if the stick was dry and brittle.

Re: What kind of cutter/punch do you use?
 

I almost always use a V cutter. Sometimes I put 2 V's on the larger RG smokes. Habit I guess.

Re: What kind of cutter/punch do you use?
 

was primarily a punch for yeays, mainly because it was built into my lighter (Nice triple soft flame Colibri).....now use my Palio with great success