Cigar Asylum Cigar Forum

Cigar Asylum Cigar Forum (http://www.cigarasylum.com/vb/index.php)
-   Accessory Discussion / Reviews (http://www.cigarasylum.com/vb/forumdisplay.php?f=14)
-   -   Using a wood screw as a tool to nub (http://www.cigarasylum.com/vb/showthread.php?t=3692)

nozero 11-08-2008 02:13 PM

Using a wood screw as a tool to nub
 
without burning my fingers. Anybody else do this?

I was experimenting using an old anodized black, slightly rusted sheet metal screw, then my wife bought me package of eight 6x2-1/2 flat Phillips Zinc wood screws.

I screw it in about a half inch from the head when I've got enough left to handle it easliy. Works like a charm. Some wrappers crack or split a little, some not at all and I've had no leaks or noticeable impact on taste yet. Just thought it was worth mentioning.
:tu
Enjoy!

markem 11-08-2008 02:31 PM

Re: Using a wood screw as a tool to nub
 
I don't use a screw anymore, but did once on a camping trip. What I use now is a pair of self-closing tweezers. You apply pressure to open the jaws and they self close when no pressure is applied. Never had one break the wrapper and you can nub it to the end. I think mine cost about $6 at a hobby store.

Cigary 11-08-2008 02:45 PM

Re: Using a wood screw as a tool to nub
 
I got the STogie Nubber,,its only $12 and it is worth every cent.

Don Fernando 11-08-2008 03:51 PM

Re: Using a wood screw as a tool to nub
 
I use a wooden toothpick

jitzy 11-08-2008 04:44 PM

Re: Using a wood screw as a tool to nub
 
I still burn my fingers

Skywalker 11-08-2008 05:44 PM

Re: Using a wood screw as a tool to nub
 
Bamboo Skewers work good too!!!

bobarian 11-09-2008 12:44 AM

Re: Using a wood screw as a tool to nub
 
I use a flat head mini screwdriver, it keeps the nub from spinning around.

nozero 11-09-2008 08:02 AM

Re: Using a wood screw as a tool to nub
 
Quote:

Originally Posted by Don Fernando (Post 58634)
I use a wooden toothpick

I was using a wooden toothpick before I moved on to the screw. After you get down to it, the wood adds some taste characteristics that I sometimes didn't enjoy. Also, the screw prevents the nub from turning on you when you go to draw.

I can't see spending $12.99 plus shipping for a nubber, but that's just me. I'd rather spend it on a cigar or two.

Don Fernando 11-09-2008 08:48 AM

Re: Using a wood screw as a tool to nub
 
I know Ucubed uses chopsticks as a nubbing tool

nozero 11-09-2008 08:52 AM

Re: Using a wood screw as a tool to nub
 
Quote:

Originally Posted by Don Fernando (Post 59503)
I know Ucubed uses chopsticks as a nubbing tool

Yes, I've seen the pictures. Another good idea, especially with the added rubber band to keep them holding on to the nub.

CBI_2 11-09-2008 09:02 AM

Re: Using a wood screw as a tool to nub
 
I use my small Swiss army knife. Small blade sharp enough to pierce the nub easily without any damage. Sharp edge away though is very important. :D

Have used my larger knife also but a little harder to do with the larger thicker blade.

nozero 11-09-2008 02:03 PM

Re: Using a wood screw as a tool to nub
 
Quote:

Originally Posted by CBI_2 (Post 59523)
I use my small Swiss army knife. Small blade sharp enough to pierce the nub easily without any damage. Sharp edge away though is very important. :D

Have used my larger knife also but a little harder to do with the larger thicker blade.

I've used the small Swiss army knife method too and it worked very well. :tu

ucla695 11-09-2008 03:47 PM

Re: Using a wood screw as a tool to nub
 
I've used tooth picks, corn on the cob holders and paper clips before, but never a screw.

alley00p 11-15-2008 02:58 PM

Re: Using a wood screw as a tool to nub
 
Fissure30 gave me a pipe tool that I carry in my pocket all the time. I have found this invaluable to nub those ends that I just don't want to stop enjoying!

:dance::dance::dance:

Savvy 11-15-2008 03:27 PM

Re: Using a wood screw as a tool to nub
 
I never really get too far into nubbing cigars, but the furthest I went was with a WOAM. I really enjoyed that cigar. And thanks to replicantargent, I was able to nub it to just about nothing with a fondue fork. So yeah, if I ever get to that point with a cigar again, it's going on a fork.

Cigary 11-15-2008 03:50 PM

Re: Using a wood screw as a tool to nub
 
Quote:

Originally Posted by nozero (Post 59455)
I was using a wooden toothpick before I moved on to the screw. After you get down to it, the wood adds some taste characteristics that I sometimes didn't enjoy. Also, the screw prevents the nub from turning on you when you go to draw.

I can't see spending $12.99 plus shipping for a nubber, but that's just me. I'd rather spend it on a cigar or two.

I thought that way to until I saw how much more smoking I was able to get out of a cigar with a nubber. The avg is about another 5 minutes of enjoyment for a one time cost. Multiply that over a period of time and you get your money back pretty quick but if you like the screw,,,I say continue with what you like.

Martin 11-15-2008 06:23 PM

Re: Using a wood screw as a tool to nub
 
Sweetness clips RULE

Bear 11-15-2008 11:47 PM

Re: Using a wood screw as a tool to nub
 
Quote:

Originally Posted by Martin (Post 70601)
Sweetness clips RULE

+1

I wasn't going to mention them, but the creator of the Sweetness clip is not only a GENIUS, he's a heck of a guy too. :salute:

skyhigh340 11-16-2008 07:15 AM

Re: Using a wood screw as a tool to nub
 
just the paper clip for me!:D

M1903A1 11-16-2008 10:45 AM

Re: Using a wood screw as a tool to nub
 
My only concern with using a screw as a nub tool is that many screws are plated in the production process. Some of the plating materials (cadmium comes to mind) are extremely bad for your health. I wouldn't want to take risks with the potential for ingesting/"inhaling" anything these plating materials might give off if heated.

I just stick with toothpicks.


All times are GMT -6. The time now is 06:44 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.