Recommend a Burr grinder
 

Looking for decent Burr grinder that wont break the bank. New to the Mokapot scene, thanks to Tzaddi.:bh

Read where a Burr is recommended over my old whirlybird. Any suggestions would be greatly appreciated.

Re: Recommend a Burr grinder
 

Not sure what will break the bank for you? $200-300 on up is where it is at but there are cheaper ones, I want mine to last and not be disposable so I stayed in the better range.
Grinders

I used a whirly blade for my mokapot for many years with good results, a burr will give you excellent results.

Re: Recommend a Burr grinder
 

I use a Gaggia MDF grinder and am very satisfied. I paid less than 200 for it.

Re: Recommend a Burr grinder
 

What did you pay $199.99? I have not seen one for less than $206 new.

Used is a good way to get a great grinder cheap and buy new burrs.

Re: Recommend a Burr grinder
 

Bob,

When I get home this weekend I can tell you about the one I purchased a few months ago.

Here is the low down. I will provide photos as well.:D

Capresso Infinity Conical Burr Grinder
Commercial Grade, Solid Conical Steel Burrs w/Advanced Cutting Design for High Precision Grinding
$98.99

For maximum aroma and flavor retention nothing beats the Infinity Conical Burr Grinder series. Computer controlled special grinding heads cut the angles and shapes of the steel burrs to within 0.1 mm precision (1/250 of 1 inch). Burrs are produced as matched pairs and are hand-assembled in Switzerland for precise fit. The multiple gear motor produces the slowest grinding action (< 450 rpm) resulting in highest precision grinding from Turkish fine to percolator coarse.
Heavy-duty zinc die-cast housing
Extremely wide range from Turkish fine to coarse for all kinds of coffee preparation
Clearly marked fineness settings: 4 extra fine, fine, regular, & coarse; total of 16 settings
Commercial grade, solid conical steel burrs w/advanced cutting design for high precision grinding
Gear reduction motor grinds slow w/reduced noise & little static build-up
Slowest grinding speed in its class creates less friction & heat build up preserving max aroma & flavor in any grind setting
Safety lock system
Upper conical burr removable for easy cleaning
Tight fitting ground coffee container (holds up to 4 oz. of ground coffee)
See through bean container holds up to 8.8 oz. of beans
Timer can be set to grind from 5 to 60 seconds
Pulse grinding possible
Elegant, timeless and user-friendly design
Cleaning brush and measuring scoop included
Watt/Volt/Hertz: 100W, 120V, 60Hz
UL Listed
Dimensions: 10.8” x 5.4” x 7.7”
Weight: 6.1 lbs.
1 Year Limited Warranty for Household Use
Made in China

Re: Recommend a Burr grinder
 

Yep this one is outstanding Capresso Infinity Conical Burr Grinder;)

Re: Recommend a Burr grinder
 

How much $$$?

Also, browse: http://coffeegeek.com/reviews/grinde...ll=&Letter=A#A

Re: Recommend a Burr grinder
 

Thanks guys! I am guessing I should stay away from this one?
http://www.ecost.com/Detail.aspx?edp...avid=155441519

Re: Recommend a Burr grinder
 

I love my Capresso, worth the extra $$ in my opinion.

Re: Recommend a Burr grinder
 

I have a Rancilio Rocky that works wonderfully!

Re: Recommend a Burr grinder
 

Actually about $160 from WLL refurbished.

Re: Recommend a Burr grinder
 

I have like a $50 Krups one that does the job. But I'm sure its nowhere near the $200+ ones. Might upgrade grinder, but I gotta get a scale to weigh beans first

Re: Recommend a Burr grinder
 

I'd give another positive review to the Capresso Infinity Conical Burr Grinder. I've only had mine a month or so but am really liking it so far. It struck me as a good compromise between whirly-blade and Rocky kind of money if you're new to the bean and not sure where you're going with it yet.

Re: Recommend a Burr grinder
 

I arrived home last night and as promised here are a few photos of the Capresso Infinity Conical Burr Grinder.

It might be interesting for some to be able to see what the heck a conical burr looks like.:D


http://gallery.mac.com/tzaddi/100198/DSC02589/web.jpg

http://gallery.mac.com/tzaddi/100198/DSC02583/web.jpg

http://gallery.mac.com/tzaddi/100198/DSC02498/web.jpg

And here is a shot of the mocha pot showing why we go to such lengths. :tu

http://gallery.mac.com/tzaddi/100198/DSC02507/web.jpg

Re: Recommend a Burr grinder
 

I use a Capresso Infinity as well. I had to develop new static-handling skills, but having done that I'm happy with the Capresso. I'm willing to remain blissfully ignorant of $500 grinders until I have the means to acquire one. In the meantime the Infinity certainly beats the beans out the old whirly blade.

Re: Recommend a Burr grinder
 

I understand your reference to static, could you share your technique to overcome this? Thanks.

Re: Recommend a Burr grinder
 

It's just a matter of tapping the grounds container at various times to discharge the static. A couple times in the front while grinding (the container tends to vibrate out of place, so this keeps the container in place as well) and then a couple times on each side when the grinding is complete. It's not a complete solution, but it helps keep the mess down a little.

Re: Recommend a Burr grinder
 

If you whip a bamboo chopstick inside the grounds reservoir for a second or two that'll usually kill static.

Re: Recommend a Burr grinder
 

Tapping and whipping.

Need I repeat any particular incantation? :D

:tu thanks for the tips. Sounds like good juju to me.

Re: Recommend a Burr grinder
 

Mazzer Mini. You are looking at about $550 to $670, shop around, don't forget ebay. ;)

The Mazzer Jolly is it's big brother, but it probably won't fit under your kitchen cabinets. Conical burr grinders are the ultimate but at 3X the price.