Cigar Asylum Cigar Forum

Cigar Asylum Cigar Forum (http://www.cigarasylum.com/vb/index.php)
-   Coffee Discussion (http://www.cigarasylum.com/vb/forumdisplay.php?f=43)
-   -   Storage Tins (http://www.cigarasylum.com/vb/showthread.php?t=22750)

Cigargal 10-07-2009 11:49 AM

Storage Tins
 
I just ordered a couple of storage tins from Sweet Maria's. What is the proper use of these babies. Do you put the coffee in before or after it is cooled-if after, how long after. If I use these tins how long before I grind and brew for the best cup?

Mister Moo 10-07-2009 12:27 PM

Re: Storage Tins
 
Store the beans when they're cooled, object being to reduce the contact with air, light, odors and moisture. Those cans will do that.

Best to grind right before brewing.

floydpink 10-07-2009 12:35 PM

Re: Storage Tins
 
I use them and my system is to keep my green beans in paper bags or burlap bags until roasted.

Once roasted, they move to the SM storage tins with a note on it saying the bean, roast date, and roast notes.

I was told to make sure you don't expose the bottom to water as it will mess up something or other in the valve that releases the gas.

If you do mess them up, they are cheap enough to replace.

They are nice and plain, and I let my 4 year old daughter color mine with rainbows, frogs, and angry pit bulls.

Cigargal 10-07-2009 05:10 PM

Re: Storage Tins
 
Hey...lets have a Post your Tins Photo contest!! :r

So let them cool then tin...I always grind seconds before brewing. 24 hrs in the tin good enough to wait befor brewing?

Mister Moo 10-07-2009 07:00 PM

Re: Storage Tins
 
Quote:

Originally Posted by Cigargal (Post 589128)
Hey...lets have a Post your Tins Photo contest!! :r

So let them cool then tin...I always grind seconds before brewing. 24 hrs in the tin good enough to wait befor brewing?

24-seconds in a pinch; 24-48 hours, ja, shure.

Fumes 10-07-2009 09:00 PM

Re: Storage Tins
 
I figure the beans are cool enough once the cooling cycle is finished. I just dump em straight from the drum into the SM tin can. (Barbaric, I know, but there are only so many hours in the day.) The valve has a paper bit that is susceptible to H2O damage, so you're supposed to wipe it out with a dry paper towel and not wash it.

floydpink 10-08-2009 06:57 AM

Re: Storage Tins
 
Mine get cooled over a fan in a collander after roasting, then put in the tin.

I normally have a day or two worth of beans in the grinder hopper so I am not going to the tin for a couple days.

I'm roasting twice a week now and actually find that I am liking the stuff better after 3 days of rest and even notice more oils showing up on the darker roasts after a few days.

I guess this this can still be considered fresh.

Cigargal 10-08-2009 12:00 PM

Re: Storage Tins
 
I wish I could get ahead on the roasting. It seems like I am always needing more coffee!

Mister Moo 10-08-2009 02:37 PM

Re: Storage Tins
 
Coffee usually develops for days after roasting, IMO, not hours. Sometimes it isn't "there" for 5-6 days post-roast and, thereafter, can hang good for two weeks with reasonable storage.

If you're falling behind then you only need bigger roasters. Y'all need to be looking into a 4-burner gas grill conversion or stacked SCCO or something like that. Those FRs and IRs are good for learning. After that you need to, uh, scale up! Crikey, Fl'ink - you'll need at least a 4-burner grill/roaster to keep that Brasilia fed.

floydpink 10-08-2009 09:02 PM

Re: Storage Tins
 
I'm actually going through a mind bending research on roasters and am leaning towards the Hottop programmable at this point.

I don't see the Freshroast lasting more than a couple more months max. I am definitely pushing it and don't wait the suggested 30 minutes rest between roasts and cheat quite a bit past the 8 minutes max.

I am even finding myself taking off the chaff collector to let a little heat escape so I can get a longer roast.

Roasting is something I don't see leaving my life and really want to get it right on the upgrade and am wondering if I can keep it somewhat simple and dependable on the scale up while avoiding buyer's remorse.

The Brasilia isn't overly hungry as far as i can see, and since I got the squirting and whistling under control, it's just packing a few portafilters a day to keep me running, which actually reduces my trips to Sam's Club for Monster energy drink by the case.

The main challenge has been keeping the thing shiny and not burning myself on all the metal that I didn't previously have. I am a bit scarred at this point from some groggy mornings bumping into hot brewgroups and probably shouldn't have taken off the "caution" sticker so soon.

On the positive side, I haven't fallen victim to any scalding citrus acid in the eyes as a result of the excellent pressure relief on the E61's valve for backflushing.

germantown rob 10-09-2009 05:27 AM

Re: Storage Tins
 
Pete, are you talking about the Hottop "P"? I highly suggest the "B' over the "P". I fell into the same allure the P gave but in reality the B is more controllable.

I would look into building a BBQ roaster because of the climate you live in, amount that can be roasted, and heat control. If I can figure out a way to add a bean mass probe to the drum I will be building one for myself for those big roasting times.

Shinning metel and burning yourself on it, ah, good old ABS plastic sure is cool to touch and a dirty sponge cleans messes off. :r

Sweet Maria tins rule, I like the way they look on the countertop.

Mister Moo 10-09-2009 06:01 AM

Re: Storage Tins
 
Quote:

Originally Posted by germantown rob (Post 591662)
...I would look into building a BBQ roaster because...

I roasted three pounds by BBQ last Sunday and find it quick, easy and somewhat controllable. I LOVE the BBQ roaster but... but... but...

It isn't particularly good for espresso blends, though. It isn't bad but, for espresso roasting I am leaning to favor the SCCO. I feel a new thread coming on.

floydpink 10-09-2009 07:19 AM

Re: Storage Tins
 
Quote:

Originally Posted by Mister Moo (Post 591672)
I roasted three pounds by BBQ last Sunday and find it quick, easy and somewhat controllable. I LOVE the BBQ roaster but... but... but...

It isn't particularly good for espresso blends, though. It isn't bad but, for espresso roasting I am leaning to favor the SCCO. I feel a new thread coming on.

Anxiously waiting to read it as espresso blends seem to be half of what I roast at this point.

Savor the Stick 10-09-2009 10:33 AM

Re: Storage Tins
 
Quote:

Originally Posted by Mister Moo (Post 591672)
I roasted three pounds by BBQ last Sunday and find it quick, easy and somewhat controllable. I LOVE the BBQ roaster but... but... but...

It isn't particularly good for espresso blends, though. It isn't bad but, for espresso roasting I am leaning to favor the SCCO. I feel a new thread coming on.

Yeah Moo...get the Thread up. I got a TO being delivered today, and a Salton Popper coming next week. So I'm still gathering parts. So an all inclusive thread for SC/CO-UFO/TO would be awesome.:banger

germantown rob 10-09-2009 12:16 PM

Re: Storage Tins
 
Quote:

Originally Posted by Mister Moo (Post 591672)
I roasted three pounds by BBQ last Sunday and find it quick, easy and somewhat controllable. I LOVE the BBQ roaster but... but... but...

I have been thinking through adding an exhaust fan and adding to the interior to keep heat closer to the beans. I want more control out of a BBQ setup then I have seen but I won't be getting rid of the Hottop for the full ability to control the roast for the $40+ green beans and the greenies for espresso.


Quote:

Originally Posted by Mister Moo (Post 591672)
It isn't particularly good for espresso blends, though. It isn't bad but, for espresso roasting I am leaning to favor the SCCO. I feel a new thread coming on.

Will this be strictly for you wrencher's or will you include those of us that just throw money at the solutions? :D

raisin 10-09-2009 06:04 PM

Re: Storage Tins
 
Quote:

Originally Posted by floydpink (Post 591365)
I'm actually going through a mind bending research on roasters and am leaning towards the Hottop programmable at this point.

Roasting is something I don't see leaving my life and really want to get it right on the upgrade and am wondering if I can keep it somewhat simple and dependable on the scale up while avoiding buyer's remorse.

"No worries", get the HTB!


All times are GMT -6. The time now is 08:28 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.