I dont want to hear "I Told You So"!!!!!!
 

just bought an Avanti 34 off of Craigs list for $75. I know you all told me to do this from the begining, so I dont want to hear it. :banger. Now I have to figure out how to modify it. What do I need for conversion??? Where do I get shelves??? Thanks everyone for your help.http://i213.photobucket.com/albums/c...239/Cooler.jpg

Re: I dont want to hear "I Told You So"!!!!!!
 

Check out hcmbeads.com for humidification. Contact ChasDen for some shelves :banger

And start paying off the credit card while you can :tu

Re: I dont want to hear "I Told You So"!!!!!!
 

Plus if you'll send me your address I can send you further instructions on how best to fill it up.:tu

Re: I dont want to hear "I Told You So"!!!!!!
 

looks like a compressor model, not a thermo. that's not an issue as some would argue - simply get Chuck's drawers with glass tops for any you're not keeping in a box.

See that drain hole in the back? I put beads in the bottom, then ran a tube from that drain hole to the top of the beads... had to drill a hole to do it, but that keeps it a closed system.

Re: I dont want to hear "I Told You So"!!!!!!
 

Congratulations on the new pick up. I would plug the drain with electrical putty. And give it a scrub with baking soda and water or maybe even a diluted bleach solution as it is previously used.

Re: I dont want to hear "I Told You So"!!!!!!
 

If you you buy Shilala HCM beads please don't do that, according to Shilala that won't end good if you do.:tu

Re: I dont want to hear "I Told You So"!!!!!!
 

It is a Thermo. That was a requirement

Re: I dont want to hear "I Told You So"!!!!!!
 

ok... I must be mistaken. I figured that big bump in the back at the bottom was a cutout for a compressor unit... I've only ever seen thermos with a flat back... but then I don't get out much.

either way - I'd definitely touch base with chuck! :tu

congrats on the purchase!

Re: I dont want to hear "I Told You So"!!!!!!
 

You may also want to get a Johnson Controls Temp Control thingy. I have one for my units. Your unit appears to be a refrigerator type from where I'm standing. If you use the temp controller it may help with the humidity in the long run.

Re: I dont want to hear "I Told You So"!!!!!!
 

The thermo is good but not required (agree with Matt) Scott Shilala says it can work very good with a compressor, you just have to do a few extra things.:banger

Re: I dont want to hear "I Told You So"!!!!!!
 

How so? I haven't heard this before and am curious about the impact. Is the theory that the condensation isn't clean enough, or because the Shilala beads don't need the water to be "re-added"?

Sorry... didn't mean to threadjack...

Re: I dont want to hear "I Told You So"!!!!!!
 

no it was because of the amount of friction that is caused when water comes into direct contact with his beads can create enough heat to not only melt the bags they are packed in but damage other things around them. So the water has to come from an ambient source like sitting in a tupperware with a shotglass or somesuch.

Re: I dont want to hear "I Told You So"!!!!!!
 

No problem. Shilala says to never add water directly to the beads cause of the friction it causes. there is a youtube video that shows the bad conseqeunces.

Re: I dont want to hear "I Told You So"!!!!!!
 

This one?
http://www.youtube.com/watch?v=xPV8e...eature=related

Re: I dont want to hear "I Told You So"!!!!!!
 

what he said, I was just too lazy to explain.:tu

xactly

Re: I dont want to hear "I Told You So"!!!!!!
 

Congrats Larry, have fun filling that monster up. :tu

Re: I dont want to hear "I Told You So"!!!!!!
 

Oh he will get it full.:r

Re: I dont want to hear "I Told You So"!!!!!!
 

no problem

Re: I dont want to hear "I Told You So"!!!!!!
 

I told you so.

Re: I dont want to hear "I Told You So"!!!!!!
 

:=:

Hey Mario, you're gonna have to dumb down the tech speak for the rest of us... :r
Posted via Mobile Device

Re: I dont want to hear "I Told You So"!!!!!!
 

For everyone that said that my new cooler was a compressor I owe you an apology. I was told that it was Thermoelectric. It was picked up by a friend that did not know the difference. I was wrong and I admit it. Now that is out of the way, what needs to be done to a COMPRESSOR cooler for cigar storage??????

Re: I dont want to hear "I Told You So"!!!!!!
 

:r:r:r:r

Re: I dont want to hear "I Told You So"!!!!!!
 

Let me see if I have this right. Because of the compressor, I will have to make each drawer into a separate humidor?? make drawers that are sealed with their own beads and used the cooler for temp control???? I also know that I could use cigar boxes for the same thing, but I buy allot of singles and 5 packs. Guess this is the route I will take, unless someone has a better idea.:confused: