Re: If you could build the perfect draw tool
 

Yeah something maybe a cross from the Aerolus ( sold at cigar mony ) and a knurled draw tool. I was thinking of making something like this at work, are you making some OP?

Re: If you could build the perfect draw tool
 

best i have used is a needle file

Re: If you could build the perfect draw tool
 

My not be the perfect draw tool but they do the job..... Yes I make 'em....

http://i243.photobucket.com/albums/f...s/DSCN2287.jpg

Re: If you could build the perfect draw tool
 

So far, I've been using the thin poker that is part of a 3-1 czech pipe tool, for the past year or so.

http://i388.photobucket.com/albums/o.../czechtool.jpg

Mine hangs on my keyring, along with a cigar punch and a Nibo lighter purge and flame adjuster, so I always have it. In a pinch, it works as a nub tool too. :tu

BTW, Steve (Fissure) is trying to put together a GB for some drawtools. See this thread: CA Troop Support DrawTool GB :D

:dance:

Re: If you could build the perfect draw tool
 

How about a trained tobacco beetle. That would be so COOL!!!!

Just release them into the humidor, have them sniff out the plugged cigars, crawl into the tight spots, eat just the right amount of tobacco to loosen it up and then return to you to be put back in their container with some of Shilala's growing plants and there you have it.....

THE PERFECT "SMART" DRAW TOOL!!!!!!
!!!!!
!!!!!

Re: If you could build the perfect draw tool
 

I actually have one of the old Draw Pokers and took it to a friend of mine who has a metal shop and I told him to take the rod and "knurl" the entire length of the rod except for the tip. The tip is like a fine threaded screw that will not tear open the cigar but rather start a good pilot hole and while you push the rod into the cigar and twist and turn it it takes small pieces of the cigar tobacco and opens up the inside of the cigar much like the tool they use to open the arteries of plaque ridden arteries in the human body. It mimics the process much like an atherectomy and when you slide the rod back from inside the cigar it traps the pieces of tobacco that was plugging the cigar in the tip portion of the rod like a small drill and pulls it back thru the insertion point. The Draw Poker has a guide to keep the rod from poking thru the side of the cigar at any point. I have literally saved at least 50-70 cigars that smoked great after using this tool. I figure at $8 a cigar I have saved myself at least $500 in the last 3 years and that's nothing to sneeze at.:tu

I have one of Troys tools and it works great for some cigars that have issues.

Re: If you could build the perfect draw tool
 

I have improved the tips with flutes cut in them...

http://i243.photobucket.com/albums/f...s/100_2877.jpg

Re: If you could build the perfect draw tool
 

Do you sell them?

Re: If you could build the perfect draw tool
 

If you do not remove tobacco from a plugged cigar, the plugged cigar will more than likely stay plugged. Check out PLUGGED CIGAR TOOL on You Tube and E Bay.

Re: If you could build the perfect draw tool
 

Welcome to Cigar Asylum. You might want to post a introduction in the new inmate forum.

Not disclosing you are a vendor is frowned upon here.

Re: If you could build the perfect draw tool
 

At least he put it in the right thread. :r

Re: If you could build the perfect draw tool
 

I used a meat thermometer once, worked like a charm.

Re: If you could build the perfect draw tool
 

My Henry's works perfectly. And it's also the perfect nubbing tool!

http://i129.photobucket.com/albums/p...IMG_2457-1.jpg

Re: If you could build the perfect draw tool
 

I am intrigued. Just bought on and will do a review when it arrives.

Re: If you could build the perfect draw tool
 

:tu

Re: If you could build the perfect draw tool
 

Arrived 3 days after I ordered it. Great packaging and it looks nice. The best thing is that so far it works. Tried it on an infamous 1999 Punch Churchill;) and it allowed me to actually get a draw and smoke it.:tu Pictures will be forth coming.

Re: If you could build the perfect draw tool