Pics of your ashtray

[J-Man]

Mine's more of a butt jar on a bucket than an ashtray.

[T.G]

Wow, Stinky, thanks bro!

My earlier post was just thanking you for the contest, I had no idea I was one of them until I went to the PO just now.

At least I think I won... The company name line on the address label has "Casa Dooley" on it. Box is addressed to me & the note inside has my name on it - LMK if this was in error and should be forwarded to Kevin.

[CasaDooley]

Wow, Stinky, thanks bro!

My earlier post was just thanking you for the contest, I had no idea I was one of them until I went to the PO just now.

At least I think I won... The company name line on the address label has "Casa Dooley" on it. Box is addressed to me & the note inside has my name on it - LMK if this was in error and should be forwarded to Kevin.

Adam, mistake or not, you make sure that ashtray stays parked on your patio Bro!:ss No worries from me!
And congrats to all the winners!:tu

[E.J.]

Here's my ashtray..... Very rare Porsche Design P'3683

http://img262.imageshack.us/img262/8784/img2083s.jpg
http://img171.imageshack.us/img171/4886/img2081v.jpg

That is unique..... Fine pick up....

[Stinky]

"Surprise!"

:wnr

If you got one with a note . . . YOU WON!

(CasaDooley and a few others won too)

[Riff Raff]

Congrats to all the winners!! That is so cool!

Great contest Stinky!

[CasaDooley]

"Surprise!"

:wnr

If you got one with a note . . . YOU WON!

(CasaDooley and a few others won too)

That is way cool Stinky! Thank you and thanks again for the contest!:tu

[CasaDooley]

Got my Stinky today!:wo
I'll try to get some pics up by this evening!:ss

[T.G]

Broke in my new Stinky, courtesy of Stinky's contest, yesterday.

http://www.cigarasylum.com/vb/picture.php?albumid=511&pictureid=3893

Thinking about giving it a full christening at the herf next weekend too.

[TripleF]

Congrats to all who won Stinky's!!

[Stinky]

http://www.cigarasylum.com/vb/picture.php?albumid=511&pictureid=3893


http://farm5.static.flickr.com/4041/4444228730_9a84ab3244.jpg

Very Nice Pictures!!! Would you mind if I use them on my (web site) Photo Gallery? BTW: I'm always looking for good photos with the Stinky Cigar Ashtray in the shot. Occasionally people send me photos of themselves and ask that I post it in my online Photo Gallery. . . but I have to tell them NO because it's either poor quality photo, usually due to poor content or just bad photography. These are obviously good for the Stinky Cigar site. I'd also like to see some good quality photos with people enjoying cigars and a Stinky Cigar Ashtray in the shot too.

FWIW:
I'm still thinking about another contest. . . that was fun to send a little mini-bomb to y'all. :D

Do any of you remember my first 10 years on cigar forums? I used to sign all my posts with . . . I'm Stinky (Stinky@StinkyCigar.com)!

[T.G]

Very Nice Pictures!!! Would you mind if I use them on my (web site) Photo Gallery?

Thanks, I think it could have been better though - but for a quick shot with a cheap digital camera it's not bad. I'm just glad the ash held on that cigar long enough for the shot, that was one of most crumbly ashes I've seen in a long time, most of the ash from that cigar kept ending up on my shirt and the ground rather than in the ashtray.

Anyway, I don't have a problem with you using my shot, in fact, I'll email you a higher resolution version of that shot in a moment.

[eber]

Congrats to all who won the stinky contest :tu :ss

[NCRadioMan]

"Surprise!"

:wnr

If you got one with a note . . . YOU WON!

(CasaDooley and a few others won too)

Got mine yesterday too. Thanks Stinky! :banger

[nater]

FWIW:
I'm still thinking about another contest. . . that was fun to send a little mini-bomb to y'all. :D

Do any of you remember my first 10 years on cigar forums? I used to sign all my posts with . . . I'm Stinky (Stinky@StinkyCigar.com)!

Niiiice, I got to use one of your ashtrays today for the first time at a local B&M... Totally loved it!

[CasaDooley]

Couple of pics taken in my office with the new Stinky!
http://i278.photobucket.com/albums/kk110/casadooley/2010_0320KDpics0006.jpg
and
http://i278.photobucket.com/albums/kk110/casadooley/2010_0320KDpics0016.jpg
If you can use any of the pics please do and Thanks again Stinky for the Great Contest!:ss

[eber]

^^ Nice "Cuban cigars smoked here" sign, I have the same one in my smoking room :tu

[aich75013]

Here's mine.
http://www.theayalas.org/cigars/Stinky.jpg

[J0eybb]

Very Nice. I picked up mine from Stinky this afternoon. Now All I have to do is get out and smoke a cigar and take a picture or seven.

Stinky will treat you like a king. If you are ever in Vegas and need a place to smoke, Stinky knows them.

Thank you for the generous offer Stinky.

[CasaDooley]

^^ Nice "Cuban cigars smoked here" sign, I have the same one in my smoking room :tu

:tu:ss

[pennjones]

I posted this in the "where do you smoke?" thread, but here it is again:
http://farm3.static.flickr.com/2692/4433133186_07ded3b162_b.jpg

It's the free ashtray they gave out at cigar fest last year, but it's just deep enough for me and it's small, so perfect for my little table outside. I plan on buying a new version stinky in black when they come out though! They look awesome!

[BDC]

Here's a 10 pounder I made for Lewis at Don Fransico cigars.. :rolleyes:

http://i3.photobucket.com/albums/y100/BDC1/6ec900b9.jpg?t=1269621746

[CigarNut]

Here's a 10 pounder I made for Lewis at Don Fransico cigars.. :rolleyes:

http://i3.photobucket.com/albums/y100/BDC1/6ec900b9.jpg?t=1269621746Very nice! What is it made of?

[BDC]

1/4" base and 1" inch thick mild steel top..

[CasaDooley]

Here's a 10 pounder I made for Lewis at Don Fransico cigars.. :rolleyes:

http://i3.photobucket.com/albums/y100/BDC1/6ec900b9.jpg?t=1269621746

That is Very Cool!

[Gonesledn]

BDC !! good to see you over here my friend. it is a beauty. you do some awesome work.

[dox47]

Here's a 10 pounder I made for Lewis at Don Fransico cigars.. :rolleyes:

http://i3.photobucket.com/albums/y100/BDC1/6ec900b9.jpg?t=1269621746


Wow, sweet looking. Did you cast that, or was it milled from a billet? I ask because I have a milling machine myself and have made a few exceedingly ugly ashtrays on it, nothing approaching this level though.

[BDC]

Sup Wes??

dox47, I run a high def cnc plasma torch, it's a living...

[Riff Raff]

My son and I christening the new stinky courtesy of Stinky! Thanks Stinky. I can foresee this beauty getting lots of use. You can see the old one to the right of the stinky!

[pitbulljimmy]

Here's a picture of the cool little ashtray the missus got me for Christmas...
http://i934.photobucket.com/albums/ad187/pitbulljimmy/th_PC290059-1.jpg (http://s934.photobucket.com/albums/ad187/pitbulljimmy/?action=view&current=PC290059-1.jpg)

[J0eybb]

well very nice pictures of ashtrays, can anybody help me out to know from where i can get these beautiful ashtrays.

http://www.stinkycigar.com/

[Gonesledn]

i have a stinky as well. dont use it much anymore.... hard to balance a cigar on the rim. all the rests have fallen off

http://i561.photobucket.com/albums/ss52/gonesledn/utf-8BSU1HMDAxNDUtMjAxMDA0MDUtMTUzO.jpg

[sikk50]

Gorilla Glue?

[Thrak]

warranty?

[sikk50]

warranty?

Stop posting after me! Creeper! :r jk

[Thrak]

lol great minds "surf" alike I guess. :D

[Gonesledn]

i assume ist long out of warranty. one of these days i will use some JB Weld on the 3 i have left, lost the fourth. i have a ton of ashtrays, so not a big rush. it has been well used for a few years, time for retirement i guess. lol

[Gonesledn]

gathered up the ones in the garage for a group pic. still have a few in the house still in boxes


http://i561.photobucket.com/albums/ss52/gonesledn/utf-8BSU1HMDAxNDYtMjAxMDA0MDUtMTkxO.jpg

[CasaDooley]

i assume ist long out of warranty. one of these days i will use some JB Weld on the 3 i have left, lost the fourth. i have a ton of ashtrays, so not a big rush. it has been well used for a few years, time for retirement i guess. lol

Contact Stinky, he's a member here, and he'll send you a new one, no cost.
From Stinky:
When I first started producing the Stinky Cigar Ashtray, I didn't realize the manufacture would change the specifications and "cheapen" the solder joint on the stirrups. . . long story.
My opinion: They should not break off! . . . even if you drop it! So, I decided to offer an extended warranty. (I need to get that posted on my web site!) The extended warranty will require a $10.50 fee to cover shipping & handling. . . but, I wave that fee for nice guys . . . like the inmates here!

[Stinky]

Contact Stinky, he's a member here, and he'll send you a new one, no cost.
From Stinky:
When I first started producing the Stinky Cigar Ashtray, I didn't realize the manufacture would change the specifications and "cheapen" the solder joint on the stirrups. . . long story.
My opinion: They should not break off! . . . even if you drop it! So, I decided to offer an extended warranty. (I need to get that posted on my web site!) The extended warranty will require a $10.50 fee to cover shipping & handling. . . but, I wave that fee for nice guys . . . like the inmates here!
We all have pet peeves. . . although I have quite a few, one of mine is when people go to public forums with their problems without ever contacting the company they bought from (or the manufacture, distributor, etc.) So, I gotta ask: Why didn't you (at the least) call or send me an e-mail?

Oh well. . . water under the bridge now. Unfortunately you got one of the defective units in that first container load. Sorry! This is why we implemented the extended warranty. Send it back and include the stirrups (cigar holders) and I will repair it and add an extra stirrup to complet the job.

[yellowgoat]

I like glass ashtrays for some reason, bUT The stinky would be the only non glass I would buy.

Here is one of my ashtrays thats been in the family for years, I remember seeing it when I was just a little bastard running around grandmas, and I been using it since I started smoking cigs as a young teen and now I use it for my cigars.

From my phone cam...

http://i307.photobucket.com/albums/nn320/maidenfortheheart/ashtray.jpg

Looks way more beautiful clean and in person.

[Gonesledn]

We all have pet peeves. . . although I have quite a few, one of mine is when people go to public forums with their problems without ever contacting the company they bought from (or the manufacture, distributor, etc.) So, I gotta ask: Why didn't you (at the least) call or send me an e-mail?

first of all, it is a pic of my friggin ashtray. was not meant to "go public with my problem", so no need for the attitude it seems i have invoked. hope i am wrong.

second of all, i bought it from cigarbid. i dont know you, or your company, or that you had an email or a phone number to call. it was never a big deal, so i never researched your company.

third, i have had it for quite some time. i wouldnt expect a company to repair something with this much age, but thanks for the offer.

my apologies for posting a pic of my "stinky". was not meant to set off anyones pet peeves. feel free to delete the pic mods.

[Stinky]

first of all, it is a pic of my friggin ashtray. was not meant to "go public with my problem", so no need for the attitude it seems i have invoked. hope i am wrong.

second of all, i bought it from cigarbid. i dont know you, or your company, or that you had an email or a phone number to call. it was never a big deal, so i never researched your company.

third, i have had it for quite some time. i wouldnt expect a company to repair something with this much age, but thanks for the offer.

my apologies for posting a pic of my "stinky". was not meant to set off anyones pet peeves. feel free to delete the pic mods.

you cut this part:
Oh well. . . water under the bridge now. Unfortunately you got one of the defective units in that first container load. Sorry! This is why we implemented the extended warranty. Send it back and include the stirrups (cigar holders) and I will repair it and add an extra stirrup to complet the job.

[Stinky]

I like glass ashtrays for some reason, bUT The stinky would be the only non glass I would buy.

Here is one of my ashtrays thats been in the family for years, I remember seeing it when I was just a little bastard running around grandmas, and I been using it since I started smoking cigs as a young teen and now I use it for my cigars.

From my phone cam...

http://i307.photobucket.com/albums/nn320/maidenfortheheart/ashtray.jpg

Looks way more beautiful clean and in person.

Wow. . . I have that same ashtray in my office! . . . and, I use it as a candy dish! :) There was a time when it was used for cigars on my patio (before the . . . you know, this new thing). Brings back memories.

[maninblack]

Can't we all just get along?:D BTW, Stinky, the ashtray you produce is awesome! I love mine. Need to post a pic of it soon.

[Gonesledn]

you cut this part:
Oh well. . . water under the bridge now. Unfortunately you got one of the defective units in that first container load. Sorry! This is why we implemented the extended warranty. Send it back and include the stirrups (cigar holders) and I will repair it and add an extra stirrup to complet the job.

apology accepted for me getting one of the defective units. thanks, but no thanks, on the offer to fix it. its not worth your time to fix it and money to mail it back, or money and time to mail it to you.

as for the first part of your post... nevermind. your right, water under the bridge. have a nice day.

[maninblack]

Here's my stinky on the porch.

http://i1016.photobucket.com/albums/af287/picklejack/NewHumidor009.jpg

[wolfandwhisky]

Here's my stinky on the porch.

http://i1016.photobucket.com/albums/af287/picklejack/NewHumidor009.jpg

black shirt... true to name

[macsauce13]

My new ashtray (and my first one ever)!!! :banger:banger

[CigarNut]

My new ashtray (and my first one ever)!!! :banger:bangerVery cool! Now you need to put it to use :D

[MarioF]

Something I made from some scrap wood. This was from Easter Sunday with all my brothers and nephews.
http://i939.photobucket.com/albums/ad233/MTF51/IMG_2514a.jpg

[maninblack]

black shirt... true to name

Yep. Most of my wardrobe is black t-shirts and polos.

[Gonesledn]

Something I made from some scrap wood. This was from Easter Sunday with all my brothers and nephews.
http://i939.photobucket.com/albums/ad233/MTF51/IMG_2514a.jpg


i like that, sweet looking job!

[MarioF]

Here's what it looks like when it's clean
I was worried since it was wood but so far it has held up ok.
http://i939.photobucket.com/albums/ad233/MTF51/IMG_1942a.jpg

[maninblack]

That looks freaking sweet!! Nice tray!

[SouthernSmoke]

I've gotta agree! It looks awesome!

[Stinky]

Nice job, Mario! It's a beauty!

Looks like a custom hand-made Herf Edition! (I see you have a "stinky" too.)

Can you share some specs for us?

How big is it?
Diameter:
Height:
Adhesive:
Finish Material:
(and number of coats. . . looks like a deep finish)
And. . . the optional Pedestal/Stand:
:D

[wolfandwhisky]

that thing is really really nice. well done!

[TripleF]

That's awesome Mario!!! Great job bro!! :tu

[CigarNut]

Very cool Mario -- looks like someone put a lot of effort into that!

[MarioF]

Thank you to everybody for your great comments.
It's about a 10" diameter
I used 2 x1/4" oak strips glued together and then cut on a 5 degree cut and then glued into a circle. I used tilebond glue and a strap clamp. After sanding it down I rub a little red stain into it and then wiped almost all of it off, just to give it some character. I then applied about 15 coats of spray lacquer to it.
The bottom was just a piece of 1/4 inch wood cut into a circle and then I glued all the bands on. After letting it dry completely I applied about 15-20 coats of lacquer, with a light sanding in between. The bottom is nailed onto the body and then I applied a few more coats of lacquer to try to seal up the seem.

It was a fun project, I think I would do some thing things differently next time.

It's funny I was involved in the iron works industry for many years and it is very different from woodworking. A little welding, banging with a hammer and grinding can make everything look good. In woodworking everything needs to be a lot more exact and you need a lot more patience. Which I have a very limited amount of.



Nice job, Mario! It's a beauty!

Looks like a custom hand-made Herf Edition! (I see you have a "stinky" too.)

Can you share some specs for us?

How big is it?
Diameter:
Height:
Adhesive:
Finish Material:
(and number of coats. . . looks like a deep finish)
And. . . the optional Pedestal/Stand:
:D

[nomadicwookie]

Nothing fancy, but it gets the job done.

[wolfandwhisky]

Nothing fancy, but it gets the job done.

I like the design and layout of that... wide/long slot to give enough area for the cigar to rest, decreasing risk of dropping... and a large capacity bowl for an ashtray that size.