PDA

View Full Version : Temperature settings


nofeardiver
08-13-2009, 08:56 PM
I have just bought an edgestar twr282s 28 bottle, my questions is, it does not have a digital temp gauge. Does anyone know what the temp range is for the edgestar, and where should i set it at?

Thanks ahead of time for the help.

Dan

ucla695
08-13-2009, 09:00 PM
Here you go:

http://www.edgestar.com/products/winecooler/manuals/TWR282S_quickref.pdf

Looks like the low 50's to the mid 60's. I say your fine at the higher end of the range. I keep my humi at 65*. :tu

larryinlc
08-13-2009, 09:08 PM
I assume it's thermo electric? If so, it will vary by outside ambient temp. You should get a digital thermometer to set inside and turn the unit on. Trial and error is what's needed. Of all the coolers I've had. they tend to show 5 degrees cooler by the built in thermo than is actually the case. Right now during the summer months, mine is set at 63 to maintain a 68 degree actual temp inside.

Larry

nofeardiver
08-13-2009, 09:15 PM
Sweet right now I am letting it air the plastic smell out. Thanks again for the help

Dan

kelmac07
08-13-2009, 09:17 PM
I keep mine at 63 degrees...no issues here. You can pick up a digital thermometer/hygrometer at Walmart for like $7...does the trick just fine.

kydsid
08-13-2009, 09:20 PM
Just set it to the highest/warmest possible. Even when my house is 90 the Edgestar is cranking 68 degrees.

sofaman
08-14-2009, 05:06 AM
I keep my Edgestar turned the whole way down and it never gets above 63 degrees

nofeardiver
08-14-2009, 08:00 AM
Awesome, yeah i am going to plug it in tomorrow i bought and have like 5 empty boxes i am going to through in there until i get my drawers from Chuck.

Thanks guys

Dan