Asylum edition/club pipe interest thread

[DrDubzz]

Well... SlowT's Boswell thread has broached the idea of a CA edition pipe.

If we are serious about this, it'd be good to know who would be genuinely interested, approx. price range, style and maker.

It'd be great to have the Boswells do it, but of course that may not be feasable for them (in a timely manner anyway). So we may want some other options.

So lets start at the beginning, who is interested, and give a rough price range

1. rx2010 ($80-130)

[JaKaacH]

So lets start at the beginning, who is interested, and give a rough price range

1. rx2010 ($80-130)
2. JaKaacH ($79-129)

I'm trying to watch my budget Mr Mobile 1:D

[Nabinger16]

I'm all in on something like this! Especially if Boswells are able to do it.

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131) High roller so far!

[SixPackSunday]

this sounds very awesome!

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131)
4. sixpacksunday ($79.50-130.50) pinching pennies!

[DrDubzz]

You are a bunch of tools :r

But I'm happy to see the interest

[yellowgoat]

How about Senatorov? He makes great pipes! Is he on CA yet? I would be interested in a pipe up to $130! I can't go higher then that though.

Will it be the same shape/design for everyone? do you have any idea on design?

[yellowgoat]

You are a bunch of tools :r

But I'm happy to see the interest

You just BSing? LOL! :D

You funny! :hf

[DrDubzz]

How about Senatorov? He makes great pipes! Is he on CA yet? I would be interested in a pipe up to $130! I can't go higher then that though.

Will it be the same shape/design for everyone? do you have any idea on design?

Right now I just want to gauge interest in the idea. It would be one shape with different finish options. In all likelihood

[Savvy]

this sounds very awesome!

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131)
4. sixpacksunday ($79.50-130.50) pinching pennies!
5. Yellowgoat (up to 130)
6. Savvy (up to 130+)

Well since I started this mess, its only right I join in. I would like to keep it under 130, but I could probably manage to go a little bit over...:tu

[kzm007]

$50-$100 for a 'newbie' model, not that you'd probably go so low.

[WWhermit]

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131)
4. sixpacksunday ($79.50-130.50) pinching pennies!
5. Yellowgoat (up to 130)
6. Savvy (up to 130+)
7. KZM007 ($50 - $100)
8. WWhermit ($50-$150)

Possible pipemakers.

1. Senatorov (http://www.senatorov.lv/dmeng.html)
2. Boswell (http://boswellpipes.com/)
3. Zeman Pipes (http://www.zemanpipes.com/pipeslist.php?pipecat_id=8)


WWhermit
:pi:

[GreekGodX]

I'm in for this. I will go anywhere up to $150

[Nick]

I might be down and the price range for me is pretty much covered.

[DrDubzz]

so we've got roughly 10 folks down for this (and I'm sure others will show interest later)

so as far as potential makers go, we've had Boswell and Senatorov suggested, and that other fellow, Zeman, who I've not heard of really, but his stuff looks good.

Obviously there are a lot of great artisan makers, but price may become an issue. So if anyone has any larger maker suggestions fire away. I figure Savinelli/Stanwell etc could all be possibilities.

Also, what about shapes? probably nothing too crazy, lets hear your ideas

[Nabinger16]

As far as shape goes, I've been looking for a poker lately. I'm cool with any shape though, whatever the masses want.

[WWhermit]

Poker sounds good to me too.

Savinelli and Stanwell may be hard to get to do a club pipe. Usually those go to smaller guys, who can take individual order.

I like the idea of Senatorov. I think he'd be up for it and would do a great job within budget.

Jan Zeman does a good job, made 7 club pipes, one for each day of the week, for 7 years. Never heard one bad thing about him, and love his pipe.

Either way, I'm perfectly happy with any of the suggestions thus far!

WWhermit
:pi:

[Curly Cut]

a good read:
http://talbertpipes.blogspot.com/2008/07/fun-with-group-pipes.html

[DrDubzz]

that is a good read, I hope everyone will take a minute to read it

This is why I'd like to get a shape or two that everyone likes, run it by a maker or two, and see who can work with us

then once we have an agreement for production, I would like to have everyone paid up ahead of time, so we can lump sum the maker and make his life easier

[Nabinger16]

a good read:
http://talbertpipes.blogspot.com/2008/07/fun-with-group-pipes.html

Thanks for the article. Keeping that info in mind will definitely make this whole process go more smoothly and might end up giving the Asylum an "easy to work with" name with a pipe maker.

[DrDubzz]

Thanks for the article. Keeping that info in mind will definitely make this whole process go more smoothly and might end up giving the Asylum an "easy to work with" name with a pipe maker.

which would be a good thing. I'd like to approach the maker, say, can you make 12 x "bent apple" (for example) @ $110 each shipped

and maybe have two finish options. where maybe the pipe isn't super ornate, but it's well-made, good looking, and commemorates our first full year as a pipe forum

[RevSmoke]

I might be interested, depending on the finances when the time comes, a little less or near to $130 sounds decent.

Jan Zeman does some nice work and is willing to come in with a solid pipe near the price range a club is looking for.

Here's a link. http://www.zemanpipes.com/index.php

[Genetic Defect]

:hm

[DrDubzz]

I really like something along these lines
http://www.zemanpipes.com/pipe.php?pipe_id=69

not outrageous, but not boring, nice lines.. etc

[Nabinger16]

Jan Zeman does some nice work and is willing to come in with a solid pipe near the price range a club is looking for.

Here's a link. http://www.zemanpipes.com/index.php

Zeman has some really good looking pipes!

[Savor the Stick]

I'm going to step out and and say max $130 for a custom pipe is what I would be willing to spend.

So I will start putting some money away, from the odd jobs I've doing.

I really want to be a part of 1st year Asylum Club Pipe.

STS:pi

[Emjaysmash]

I dont have any money for this, but I just wanted to add that this is an awesome idea. Props to everyone!

[Nick]

I would throw Jurt Huhn into the mix of potential makers. He has a couple lines of pipes that are in or around our price range. It would be hard for most custom carvers to fulfill our requests at our price but if Kurt is willing I think it would be an easy transaction for us to make. His country man line of pipes run from 1000125 dollars. It would also be nice find an American carver for ease and accessibility. Here is his website.

http://www.pipecrafter.com/

[DrDubzz]

those aren't a bad idea, I've course I find myself liking the 500 buck variety better :dance:

[SixPackSunday]

i like a pipe with some curve in it so its sitting well below my eye level when i'm puffing, but thats just me. :)

[Requiem]

I would join in for a pipe under $130 (a little lower if possible).
Being from Europe, I would need to know about payment options, but as my wife's parents live in the US I can easily find a way. The pipe would be sent to them and they would then make it come to me. During August I'll be in the US, also.

Zeman and Senatorov seem great. I can go for any type of pipe, except for a full-bent. A poker would be nice.

[Savvy]

Poker sounds like a good shape, but I like just about everything. Like a 1/4 bent poker though, that'd be great.

Hopefully we can pull this off somewhere, cause that'd be awesome.

[DrDubzz]

a quarter bent poker would work for me as well

[Nabinger16]

a quarter bent poker would work for me as well

I think this must be fate... I was thinking quarter bent as well, just didn't want to throw too many details into the mix.

[yellowgoat]

Sounds good!

[Dukeuni]

I have not smoked pipes before, but I think a custom made CA pipe, 1st year of CA, first edition, etc. added special aspects would make me get one. Yes, if less then $130, I think I would have to do it.

[Savor the Stick]

Ok I don't know what a "poker" looks like, maybe someone can enlighten me.

But I was looking through Zeman web site and these look pretty nice. they are in his club pipe section.

http://i304.photobucket.com/albums/nn179/jonesie_007/Club03_s.jpg (http://%5BIMG%5Dhttp://i304.photobucket.com/albums/nn179/jonesie_007/Club03_s.jpg%5B/IMG%5D)

http://i304.photobucket.com/albums/nn179/jonesie_007/Club06_s.jpg (http://%5BIMG%5Dhttp://i304.photobucket.com/albums/nn179/jonesie_007/Club06_s.jpg%5B/IMG%5D)

http://i304.photobucket.com/albums/nn179/jonesie_007/Club01_s.jpg (http://%5BIMG%5Dhttp://i304.photobucket.com/albums/nn179/jonesie_007/Club01_s.jpg%5B/IMG%5D)

Thanks :pi

[DrDubzz]

this is a basic poker shape
https://www.bocabenningtons.com/Assets/images/InventoryItems/0000003088_jacopo5.gif

[Savvy]

http://www.blatterpipes.com/100th-_78.jpg

And a 1/4 bent poker

[WWhermit]

I have his poker called the Fiery Cross, seen here. (http://www.zemanpipes.com/pipe.php?pipe_id=267) Wonderful smoker. Although, I'm not partial to smokers for this club pipe thing.

At some point one of us should start to contact these pipemakers to see if they can even fit this into their schedule.

I'm excited, though. Would be nice to have a club pipe.

WWhermit
:pi:

[DrDubzz]

I think once we get a shape or two as the main choices, I'll start contacting the makers and seeing who can accomodate us

once we have a couple possibilities (or maybe just one depending on responses) we can put it to a final vote

[Requiem]

I´m up for any style, but my preferences would go to:

Poker - Zulu - Egg - Bulldog, in order of preference (a Churchw. would be top of the list, if the price range allows for it - it would make a very stylish club pipe...)
Straight to 1/4 bent are my favorites.

[CHRONO14]

I would definitely be interested. Under $150 would be about my limit. I am kind of partial to bent pipes like a bent apple, preferably a darker color with a smooth finish I don't mind a rusticated or freehand though they are also cool as long as they smoke well.

[morefifemusic]

I have his poker called the Fiery Cross, seen here. (http://www.zemanpipes.com/pipe.php?pipe_id=267) Wonderful smoker. Although, I'm not partial to smokers for this club pipe thing.

At some point one of us should start to contact these pipemakers to see if they can even fit this into their schedule.

I'm excited, though. Would be nice to have a club pipe.

WWhermit
:pi:

That's a beautiful poker.

I too vote quarter bent poker. I would like to see it rusticated as well. :)

[WWhermit]

Just a note; a rusticated pipe would keep the cost down, for those of which this would be an issue.

I have both, so I can go either way. With pipes, that is.

WWhermit
:pi:

[Nabinger16]

I don't own any rusticated pipes... Sounds like a good time to add one to the collection.

Am I easy or what? :D

[DrDubzz]

I think it would be good to have an option of rusticated or a smooth finish.

I could go for either depending on how they turn out

[kzm007]

I would definitely be interested. Under $150 would be about my limit. I am kind of partial to bent pipes like a bent apple, preferably a darker color with a smooth finish I don't mind a rusticated or freehand though they are also cool as long as they smoke well.

I'm not quite sure if what I saw was an apple or what, but I like the idea of either a bent or straight stem (if choices are possible), with a nice round bowl. Preferably finished.

Looking at it, I think an apple would be what I mean, also in a dark color.

Kegan

[yellowgoat]

Anything is fine. I like my pipes to be like my women! All shapes and sizes!! :wo

[kzm007]

:D This guy knows what he's saying lol

[TheJ]

I'm down for a club pipe. Preferably under a hundred, but can go over.

I like the idea of a quarter bent poker. Partially rusticated with a smooth rim.

[RottenZombie]

I would like to be part of a group buy on this.I could go as high as $150.It seems like a good idea to me.:D

[SSatVT]

I would like to get in on a club pipe, just as long as the price is less than $130. I would prefer to have a rusticated pipe with some kind of bend.

Seth

[Sawyer]

I am not interested in any pipe group buys anymore, but I do have a few pieces of advice for you guys.

First, make sure that the carver that you choose has done group pipes before. Dealing with someone that has never done it before or has little experience dealing with a group's expectations is very frustrating. Especially if the pipes don't meet the group's expectations in quality or appearance once completed.

Next, if you are going to pick a shape before an artisan, make sure that the artisan is comfortable with the shape that you picked and has made it before. It is probably safer to choose the maker and then pick a shape that they make pretty often with possibly some tweaks. It may not be as special or unique, but everyone ends up happy with the quality, appearance and construction.

Lastly, picking a new or up and coming pipe maker can seem attractive due to price or other considerations, but going with one of the more established pipe makers is always a better choice. Even if they may be a bit more expensive, it is worth it to know you are going to get a quality product and if you aren't happy they will make it right. A couple good ones that I can think of off the top of my head would be Tinsky and Boswell.

Good luck to you guys.

[DrDubzz]

thanks for the advice Sawyer

I would like to have Tinsky do it, but I doubt he could fit our budget. Boswell is probably the best candidate for price, but they are overwhelmed at the moment, so I don't know how soon they could be done.

I'll probably start sending out some emails next week to see who would even be interested, and figure out a shape and all that from there.

judging from this thread, I think I'll first ask about 1/4 bent poker, then maybe a bent apple.

If whoever picks us up can't/won't/doesn't like doing pokers, would you guys prefer an apple, lovat, or maybe even a dublin

let me know, I think the first round of emails will be to: Boswell, Senatorov, and Kirk Bosi (did the club pipe for IPC last year with great results)

[kzm007]

I'd still prefer the finished apple in a dark, RX.

But, an unfinished Lovat does look nice as I now look at them, not knowing what they were.

Good luck to you, and thanks for doing this! :)

[kzm007]

I want to be a pain; my updated choices are below.

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131)
4. sixpacksunday ($79.50-130.50) pinching pennies!
5. Yellowgoat (up to 130)
6. Savvy (up to 130+)
7. KZM007 ($50 - $130)
8. WWhermit ($50-$150)

I like the idea of a bent or straight finished apple pipe.

I also found some interest in an unfinished/rustic Lovat pipe.

Lastly, as Requiem stated, a churchwarden would give CA a classy sort of appeal for a first pipe, and I really like Zeman's Lord of the Pipe as well as his corkscrew stem on the Fiery Cross model.

Sorry to be such a bother; the more I look, the more I like. No more choices lol.

[DrDubzz]

looks like we've got 16 or so that would be interested.

I forgot about Zeman, I will include him in the first round of emails

[imthegoal]

I would probably be interested in getting in on this as well. Will keep an eye on this to see where it goes.

[RGD.]

1. rx2010 ($80-130)
2. JaKaacH ($79-129)
3. Nabinger16 ($81-131)
4. sixpacksunday ($79.50-130.50) pinching pennies!
5. Yellowgoat (up to 130)
6. Savvy (up to 130+)
7. KZM007 ($50 - $130)
8. WWhermit ($50-$150)
9. RGD ($49.95)

:D Price ranges are fine with me. More of a bent apple kinda guy here - with a really big bowl.


Ron

[SixPackSunday]

maybe its time to add a poll or two?

i would prefer a bent apple myself as well, but have no problems with what the majority agrees to.

[Conch Republican]

I am interested... similar range to the posted ones

[AngryBill]

I'd be willing to do this too!

[LordOfWu]

I posted in the poll, just wanted to make it official, I'm interested :dance:

[Requiem]

just a sugestion on the cheap side: Jirsa pipes (Czech Rep.)

http://www.jirsa.cz/home/index-en.html
http://www.jirsa.cz/shopcz/mypage/index.html


(note: 1000 CKZ = less $50)

[DrDubzz]

wow, there are some seriously beautiful pipes there

anyone have any experience with these?

[Requiem]

found this about them: http://forum.pipes.org/~discus/discus/messages/26/32554.html?1154113083

[DrDubzz]

hmmm, I'll keep an eye out on those, but tomorrow evening I will email the aforementioned makers

today was a bit unexpected, so I didn't accomplish much

[kzm007]

Just an unofficial vote: I REALLY like Jirsa's work, especially the grain on a number of his pieces.

[morefifemusic]

I wasnt too partial to the ones on his site, but this one (http://cgi.ebay.com/NEW-JIRSA-SMOOTH-SELECTION-GRADE-PIPE-HORN-SHAPE-09_W0QQitemZ260363120736QQcmdZViewItemQQptZCollect ibles_Tobacciana?_trksid=p3286.m20.l1116) on fleabay has really nice grain.

The price direct from him is attractive too, but I would rather pay a bit more if the quality is going to be more consistent (some of the comments on pipes.org indicated offcenter draft hole, etc.).

[Requiem]

any news on this?

[DrDubzz]

actually no, I have been swamped, but I have spring break next week, so I'll be emailing and making calls then

[Curly Cut]

I am not interested in any pipe group buys anymore, but I do have a few pieces of advice for you guys.

First, make sure that the carver that you choose has done group pipes before. Dealing with someone that has never done it before or has little experience dealing with a group's expectations is very frustrating. Especially if the pipes don't meet the group's expectations in quality or appearance once completed.

Next, if you are going to pick a shape before an artisan, make sure that the artisan is comfortable with the shape that you picked and has made it before. It is probably safer to choose the maker and then pick a shape that they make pretty often with possibly some tweaks. It may not be as special or unique, but everyone ends up happy with the quality, appearance and construction.

Lastly, picking a new or up and coming pipe maker can seem attractive due to price or other considerations, but going with one of the more established pipe makers is always a better choice. Even if they may be a bit more expensive, it is worth it to know you are going to get a quality product and if you aren't happy they will make it right. A couple good ones that I can think of off the top of my head would be Tinsky and Boswell.

Good luck to you guys.
:tpd:
he speaketh from experiencth.
sounds like you just had that problem (still waiting for my re-done pipe as well).

i have to agree, i'd stick with a basic shape, one that you know the pipe maker chosen makes frequently and you like the outcome.

anyone looked at Joel Shapiro and his "chubby" pipes? he was a member of CS a while back.

[DrDubzz]

ok, I have emailed and received an initial repsonse from the Boswells.

J.M seems willing to take on our project. I can attest to how well his pipes smoke, and I guarantee he will have the best price point of anyone we've been discussing.

So, take a look here http://www.boswellpipes.com/classicpipegallery.html and post up what catches your eye.

These will be the easiest to have made, and be the most inexpensive. Most of these ran in the 50-90 dollar range when first posted.

I have posted the ones I like, but post yours, or if you see something from a different gallery post that as well. I can call him monday or tuesday if we have a good idea of what we want. I know many wanted a poker, but a nice quarter bent apple or something along those lines may be the best for getting this done and at an agreeable price :wo

[Nabinger16]

I'm good with anything from Boswell. I'm glad they're willing to take on the project. I've been wanting to own one for quite some time. Here are a couple that really stand out to me, but like I said I'm cool with what the masses want.

http://img.photobucket.com/albums/v11/emtnabinger/free158no.jpg

http://img.photobucket.com/albums/v11/emtnabinger/POKERANDFREEHANDPOKERPIPES49.jpg

[kzm007]

I like the FINISH on this one :tu but am happy with whatever.

Half-bent apple sounds wonderful for a first time. http://www.boswellpipes.com/images/pipegallery/classic/Boswell%20Classics%20(25).jpg

[TheJ]

I like this one.

http://www.boswellpipes.com/images/pipegallery/classic/Boswell%20Classics%20(51).jpg

[LordOfWu]

Can I just say 'Yes!'? I've liked all of the pipes you guys have picked...I am just starting so I'm really open for anything.

[DrDubzz]

well, I'll leave this open for another couple days, but I may just tell Senor Boswell, "make your version of a somewhat bent appleish shape, about half smooth and have rusticated

[yellowgoat]

http://img.photobucket.com/albums/v11/emtnabinger/POKERANDFREEHANDPOKERPIPES49.jpg

I really like this one! It's real nice! I always wanted a Boswell to and that is what I would buy.

But Whatever the pipe may be I'm still in!

[Requiem]

Would still prefer a poker, but anything goes with me.

[SixPackSunday]

I'm good with anything from Boswell. I'm glad they're willing to take on the project. I've been wanting to own one for quite some time. Here are a couple that really stand out to me, but like I said I'm cool with what the masses want.
http://img.photobucket.com/albums/v11/emtnabinger/POKERANDFREEHANDPOKERPIPES49.jpg

would love a sitter. especially for herfs :)

[imthegoal]

A sitter would be really nice. I have been wanting to get one and also have been really looking at the Boswell pipes as well.

[Savvy]

All right. I'm glad this got off the ground. Also really happy that Boswell's said they'd do it.

I'm really up for any shape from Boswell. I'm not picky. Bent Apple, Bulldog, Egg, Dublin, Pot, you get the idea. I'm up for whatever.

Thanks for taking the initiative to organize this and get it off the ground Tim.

[morefifemusic]

I like the shapes you guys are picking out. Might I add though, that I am not a big fan of 1/2 smooth 1/2 rusticated.

Is it possible for him to make some and then rusticate the ones that want it?

It would be nice to offer the option if it is doable for him.

Either way though, I am happy. I love Boswell pipes and it is nice to keep it in a decent price range.

[kzm007]

I agree with him, I would prefer a smooth bowl over a rusticated on, and would greatly appreciate being able to choose if it is an option - make the pipe a bit more personal and all that :)

[JaKaacH]

Count me in..I like this one from the link provided by RX2010.

http://www.boswellpipes.com/images/pipegallery/classic/Boswell%20Classics%20(37).jpg

I wonder if it could be done in a smooth finish??

[WWhermit]

Bravo for Boswell stepping up! We're guaranteed a quality smoker with him at the wheel.

That poker is catching my eye as well. I could use another sitter!

WWhermit
:pi:

[Dukeuni]

I just wanted to check in again and say that I am on board. Do these club pipes have a logo on them or other info saying they are for CA?

[Savvy]

I just wanted to check in again and say that I am on board. Do these club pipes have a logo on them or other info saying they are for CA?

Im sure Boswell's will engrave something on the pipe to accredit it as being a CA club pipe

[DrDubzz]

I would imagine so, I'm still in disjointed communication with them, but I'll have some time tomorrow, hopefully I can get J.M. on the phone and get some details figured out

[Nabinger16]

I would imagine so, I'm still in disjointed communication with them, but I'll have some time tomorrow, hopefully I can get J.M. on the phone and get some details figured out

I appreciate you heading this up! I can only imagine what a headache it's going to be before it's all said and done. If there's anything I can help with, just shoot me a PM.

I'm definitely on board whatever the pipe and cost ends up being.

Thanks again, Bro!

[dogsplayinpoker]

Im sure Boswell's will engrave something on the pipe to accredit it as being a CA club pipe

Ya'll could get a stamp made for this pipe and would also be for future CA pipes. Add it to the price, divide the cost amongst all members ordering.

[TOB9595]

Count me in..I like this one from the link provided by RX2010.

http://www.boswellpipes.com/images/pipegallery/classic/Boswell%20Classics%20(37).jpg

I wonder if it could be done in a smooth finish??

I am interested.

I like the looks and style of this.
Tom

[TOB9595]

From the BOSWELL line I like the individuality of these for a club pipe
http://img.photobucket.com/albums/v116/TOB9595/Cigar%20ASYLUM/BoswellClassics46.jpg

http://img.photobucket.com/albums/v116/TOB9595/Cigar%20ASYLUM/BoswellClassics48.jpg

http://img.photobucket.com/albums/v116/TOB9595/Cigar%20ASYLUM/BoswellClassics51.jpg


How about SENATROV or ZEMIN?

Is BOSWELL the final choice?
Tom

[fissure]

I'm not a big pipe smoker (yet) but I would definitely be interested:tu

[DrDubzz]

How about SENATROV or ZEMIN?

Is BOSWELL the final choice?
Tom

Tom, I think we're gonna pursue the Boswell route first, as it will be the most cost effective. If that doesn't work out we can try someone else.

Boswell makes great pipes and it's very likely they'd be under 100 bucks, I just need to get ahold of J.M. who happens to be very busy

[TOB9595]

BOSWELL is not a problem, Tim.

First rate workmanship..
I do like his unique styles the best to exemplify this unique community.
Tom

[DrDubzz]

alright guys, I'm calling tomorrow, as requested by Mrs Boswell

hopefully I can get JM on the phone for a few and try to figure something out. I will consider all requests, and I'll try to get 1 or 3 options for us to vote on, and hope then just turn it over to the artisan himself.

There are other great makers out there, but I think Boswell is the best combo of price and quality I've seen, plus his pipes are somewhat quirky, so I think that fits this forum pretty well.

if you have any last minute comments or requests or anything, post em up before tomorrow evening

[imthegoal]

I am very very stoked man. I have been talking with them through emails for a couple weeks as well for a personal pipe. I can not wait to see the one for CA.

[Nick]

Good stuff Tim, I'm excited to see what they come up with.

[kzm007]

Thanks for all the effort, your time really is appreciated :) and I agree that Boswell seems like a good choice in the end.

[tooomanycolors]

I may be in for this depending on final price and style. I should be good for around $100 and would prefer and apple or brandy with a quarter bend, not sandblasted

[SixPackSunday]

I may be in for this depending on final price and style. I should be good for around $100 and would prefer and apple or brandy with a quarter bend, not sandblasted

That was much quicker than I expected! :r

[tooomanycolors]

hey I waited at least an hour...Oh and a fairly large bowl and take the pipe to weigh not much more that 2oz at the very most

[SixPackSunday]

lol, listen to the FNG coming in here being all picky. :ss

I'm an easy guy to please, but think I would smoke a pipe much more often if it was a sitter personally. I hate trying to smoke outside and finding a place to sit it down if I step away from my chair.

[AllOGistics]

I may be in for this depending on final price and style.

:tpd:

[tooomanycolors]

hey I am the FNG and my opinion is important, haha, I blame it on all the fricken pipe guys at my B&M

[DrDubzz]

guys, I've gotten behind a bit on this, school took every free moment this last week

I will try to get em on the phone soon

[kzm007]

Just wondering what the status is on this, any change? And trust me, I know what busy with school is, too. Finals kill me. Good luck :)

[SixPackSunday]

no rush at all man, school is obviously first.

[GreekGodX]

no rush at all man, school is obviously first.

Obviously?

1. Women 2. Sex 3. Pipes/Cigars 4. Booze 5. Family 6. School

This means after he thinks about women and has sex he will handle the CA pipe. Then have a drink with the family. After all that then comes school :tu

[CHRONO14]

Maybe the first two are with a teacher thus moving #6 to the #1 spot
:D
Obviously?

1. Women 2. Sex 3. Pipes/Cigars 4. Booze 5. Family 6. School

[DrDubzz]

ooook, I finally called, spoke with JM for about 10 minutes

here's what we need to do.

decide on a definite shape, and I will post up a few of his pipes to vote on, majority will rule (will be poker and apple choices).

decide on an abbreviation for the pipes (ie C.A.P.F or somesuch). he will have every pipe dated the day made (as he does with every pipe). Also, the pipes will have the initials of the purchaser on them. so we will all have a unique pipe in that sense.

he said he would be willing to make up to 25 (and if necessary could make a few more later as needed). so once it's all decided we can do a first come first serve sign up, and go from there. So it may be in the interest of those who smoke pipes regularly to keep an eye on this.

some will be smooth and some rusticated (we'll have that as a part of the vote to figure out how many of each)

additionally, he said once it's all settled and he has a shape to start working on, it'll take a few weeks to get them all made, but they will ship out as completed.

they won't be identical, but they will all be the same shape. I think it will be nice to let JM do his thing and be creative within the confines of the shape.

Lastly, figure a poker shape to run in the neighborhood of $100 bucks, and an apple to probably be 85-ish.

ok, I'll work on a new thread with pictures to vote on, and we'll hammer out the details there. Feel free to voice questions or concerns here :tu

[Requiem]

I live in Europe, so I'll have to find a way to make the payment for the pipe. My wife's parents live in the US, but they are quite old and don´t speak perfect english.

Could someone be so kind to ask the Boswells their internacional bank account number (IBAN) so that when the time comes I could transfer the money directly to them?

Thanks.

[DrDubzz]

I imagine you can pay by credit card when the time comes

[Requiem]

ok, that would solve my problem.
thanks

[Nabinger16]

Tim... You rock Bro! Thanks again for heading this up. To say the least, I'm ecstatic to see how the one I end up with turns out.

[Ranger_B]

I know I just found this but I would be interested for sure if this hasnt filled up yet. I am still new to pipe smoking so I am not real set on any shape or finish although my girlfriend prefers my smooth finished pipes.

[TheTraveler]

I just got back to this forum recently after a few months hiatus from the internet. I hope I'm not too late to join in the festivities! I'm interested - but I'll wait to see the example pics (and my money status at that time) to say for sure.

*subscribed*

[fissure]

Traveler,

It has all been decided already. There probably is still time to get in on it.

Here is the order thread:
http://www.cigarasylum.com/vb/showthread.php?t=16150

Here was the winning pipe: Pipe number 4 with a medium bowl

http://www.cigarasylum.com/vb/showpost.php?p=362304&postcount=1

[TheTraveler]

Thank you fissure - I'll check it out. :)